Question about Lincoln LS
I had the same scenario with the taillight and the license plate light that wouldn’t come on. Brake light, emergency light, left signal light, right signal light, and reverse light are all working!!!!! I was limited to drive during the day only for the last two months, so I had to be home before sun set, and my wife loved it actually ;)…..First you need to check all the fuses inside the car as well as the distribution box under the hood, then check the all light bulbs to see if there is any burn light, check the main switch light inside, and if everything turn okay. Your last option is the LCM Lighting Control Module under the dashboard, it cost around $500, but get a used one from the junkyard, it may cost you around $150. Finally, my driving isn’t limited no more.
Posted on Aug 04, 2010
Start pulling the fuses one by one until you find the blown fuse. I am having the same problem on my wife chevy van, and that is what I started doing. It did not affect the electrical system.
Posted on Mar 29, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there are a few fuses under the hood be sure to check fuses again at dash they could look good but not be and if one was blown it could have blown as soon as you turned them on again that would indicate a short. it could be the switch also if it is the pull type try pulling it slowly to see if they come on and turning it like to dim the dash lights. if that makes them come on you need a new switch sometimes it will work sometimes not
Posted on Dec 23, 2008
I had similar problem with my 97 sierra... I only lost 1 light, then brake lights stayed on all the time... turns out the "t" connector for the trailer harness under rear bumper was rotted inside...unplugged the 2 parts of the harness and pluged them into each other with out the "T" harness.... everything works great... Hope it helps ya
Posted on Feb 27, 2009
SOURCE: bad tail lights on 89 chevy 1500
you should be able to just unscrew two screws that holds the tail light to the truck, then just twist and pull to remove the bulbs then replace with a new bulb, this should fix it. otherwise its a wiring issue
Posted on Jun 16, 2009
If you don't have a manual, just get a test light, and ground it to your door hinge. At the back of every fuse, you will see part of the metal filament showing through. Touch your test light to each side of the fuse. You should have power to both sides of every fuse (when your key is on). If no voltage on one side, the fuse is burnt.
Posted on Jun 23, 2009
Tips for a great answer:
Dec 19, 2017 | Cars & Trucks
Sep 15, 2015 | Ford Cars & Trucks
Sep 15, 2015 | 2005 Ford Focus
Aug 25, 2015 | Cars & Trucks
Nov 17, 2014 | Hyundai Accent Cars & Trucks
Jan 08, 2014 | Chevrolet Caprice Cars & Trucks
Jan 10, 2013 | 2002 Chevrolet TrailBlazer
May 08, 2010 | 1998 Ford Expedition
Dec 23, 2008 | 1992 Mercury Cougar
660 people viewed this question
Usually answered in minutes!