Question about Toyota Corolla

3 Answers

Code p2118 - Corolla Toyota Cars & Trucks

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

REALMENTE O FUZIVEL ESTAVA QUEIMADO (ETCS DE 10A )

Posted on Mar 10, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 17,970 Answers

DTC P2118 - ETCS Module Performance

First, we can thnik around a blown fuse in the fuse box under the hood, check the fuse marked ETCS, also check for any other fuses that may be open. They power supply to the ETCS is the reason for the code setting. The voltage was detected as low. Did you check the connections and all the fuses and power to the throttle motor. Click THIS LINK for the info available about P2118 code.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 14, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

P2118 means low juice battery, recharge the battery or install a new one. however your battery still good (some what) then start the car and let it idle to charge the bat.

normally when you have p2118 you won't be able to accelerate - why Throttle Actuator Control Motor Current Range is too low.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P2118 engine code, and the vehicle would not accelerate at all. what should I do? Kindly help, is a 03 Toyota 4Runner SR5 Sport Utility.


P2118 Toyota - Throttle Actuator Control Motor Current Range/Performance

Possible causes:
- Faulty Throttle Actuator Control Actuator
- Electronic Throttle Control System (ETCS) harness is open or shorted
- Electronic Throttle Control System (ETCS) circuit poor electrical connection

When is the code detected?
The Engine Control Module (ECM) monitors the battery supply voltage applied to the electronic throttle actuator. When the power supply voltage drops below the threshold, the ECM concludes that the power supply circuit has an open circuit. A DTC is set and the MIL is turned on.

Possible symptoms:
Engine Light ON (or Service Engine Soon Warning Light)

P2118 Toyota Description: The Electronic Throttle Control System (ETCS) has a dedicated power supply circuit. The voltage (+BM) is monitored and when the voltage is low (less than 4 V), the Engine Control Module (ECM) concludes that the ETCS has a fault and current to the throttle actuator is cut. When the voltage becomes unstable, the ETCS itself becomes unstable. For this reason, when the voltage is low, the current to the actuator is cut. If repairs are made and the system has returned to normal, turn the ignition switch OFF. The ECM then allows current to flow to the actuator and actuator can be restarted.

P2118 Toyota Throttle Actuator Control Motor Current Range Performance

found this helpful answer from toyota mechanic on JustAnswer com

Jun 05, 2015 | 2003 Toyota 4Runner

1 Answer

WHY P2118 ETC


DTC P2118: Throttle Actuator Control Motor Current Range/Performance. Probable Cause:
1. Faulty sensor or solenoid
2. Damaged or corroded connector terminal contact
3. Wire harness problem. Check for voltage, open, short to ground, short to voltage
4. Control unit software needs updating
5. Faulty PCM or ECM

Any of the above could be the real cause.

May 20, 2014 | 2008 Toyota Highlander

1 Answer

P2118


code p2118 refers to throttle actuator control (ATC) throttle motor current--range/performance problem===causes--wiring --throttle motor.
check that the wiring connections are clean and tight then replace the ATC unit

May 20, 2014 | Cars & Trucks

1 Answer

Code p2110, p2118 and p0746


Google the codes & read up

It's all there on many sites

Study OBD2 Systems

OBD P2110 etc

Feb 28, 2014 | Cars & Trucks

1 Answer

I have 2006 toyota corolla, I run Diagnostic tool and it gave me the code P2118 Throttle Actuator Control Motor Current Range/Performance, how do I fix the problem.


Error Code: P2118
Description:
Throttle Actuator Control Motor Current Range / Performance
Trouble area:
- Open in ETCS power source circuit
- Battery
- Battery terminals
- ETCS fuse (located in the engine room relay block)

Jul 31, 2013 | 2006 Toyota Corolla

1 Answer

I have 2005 toyotacamry codep2118 have no accelerate check all fuses


Hi there:
DTC P2118 - ETCS Module Performance

First, we can thnik around a blown fuse in the fuse box under the hood, check the fuse marked ETCS, also check for any other fuses that may be open. They power supply to the ETCS is the reason for the code setting. The voltage was detected as low. Did you check the connections and all the fuses and power to the throttle motor. Click THIS LINK for the info available about P2118 code.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 14, 2012 | Toyota Camry Cars & Trucks

1 Answer

I have 2005 toyotacamry codep2118 have no accelerate check all fuses


DTC P2118 - ETCS Module Performance

First, we can thnik around a blown fuse in the fuse box under the hood, check the fuse marked ETCS, also check for any other fuses that may be open. They power supply to the ETCS is the reason for the code setting. The voltage was detected as low. Did you check the connections and all the fuses and power to the throttle motor. Click THIS LINK for the info available about P2118 code.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 14, 2012 | Toyota Camry Cars & Trucks

1 Answer

Hello, I have a 05 toyota camry that wont go more than 5 miles an hour. is giving me code p2118, I replaced the ETCS fuse, but still doing the same, is there anything else


P2118 Throttle Actuator Control Motor Current. Range performance problem. P2118 sets when the power supply voltage to the throttle actuator motor is out of range. The throttle actuator motor has its own regulated power supply in the PCM. If the supply voltage is less than 4 volts, the system shuts down, the code will set and the MIL will illuminate. The normal operating range for the power supply is 9 to 14 volts. To solve the problem you are having, I set up a pdf with all the instructions including the diagrams to fix your problem. Click on this link and it will lead you to the pdf. http://highlanderclub.ru/files/manual/04/21j6674h/cip2118.pdf

Oct 26, 2011 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...