Question about 1999 Chrysler LHS

Open Question

1999 Chrysler LHS 3.5L HO starting stalling at low rpms oil pressure light would come on then car would die...start back up few times then have to wait...I put new oil pressure switch, crankshaft position sensor, cleaned throttle body and idle air control valve...put car back together now it makes a loud knocking noise...like something is stuck to fan belt...any ideals why it's stalling and what could be making the noise...not getting any trouble codes

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chargerhp
  • 813 Answers

SOURCE: need to know how to

The crankshaft sensor is located on the driver side of the vehicle, above the differential housing. The bottom of the sensor sits above the drive plate.
Drivers side just above oil pan just behind differential

  1. Disconnect the negative and positive battery cable.
  2. Remove the battery.
  3. Unlock and disconnect electrical connector from crankshaft position sensor.
  4. Remove sensor mounting screw. Remove sensor

Posted on Oct 27, 2011

  • 290 Answers

SOURCE: moyor knocking om lhs 3.5 ho.

good used engine about 500-6000(30 day warranty). 250 labor; with tax-850-950

Posted on Aug 30, 2009

  • 126 Answers

SOURCE: Where is the Crankshaft position sensor located on

Mounted on transmission

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chrysler sebring low oil pressure at idle


It may be the oil pump. If the gauge is going up when the rpms increase it's probably not the gauge or pressure switch. If the computer senses the oil pressure is low it will shut the vehicle off to try to save it's self from catastrophic failure. Also it may start cranking longer before starting. Thats it building oil pressure before the computer will let it start. Make sure oil is full, clean & thick.

Nov 05, 2012 | 1999 Chrysler Sebring

1 Answer

Start up and die


If it will eventually start and run, I would check the fuel pressure at startup. The fuel pump relay provides power to the pump for 3 or 4 seconds and if the computer does not "see" oil pressure it will not continue to power the pump. That is to prevent a fire in a wreck.

Jul 27, 2012 | 1995 Chrysler LHS

1 Answer

Just purchased a 04 Chrysler Sebring 2.4L Conv. 2 wks ago. The very next day when I was driving it when I would come to a stop light the car would start idling really low and acted like it was going to...


This fix works for 2.7L engine. Worth having your mechanic look at.

Answer
NO: 08-36-99
SUBJECT: Engine Oil Pressure Light Flicker
DATE: Oct. 15, 1999
OVERVIEW:
This bulletin involves adding a terminal/wire/vent to the oil pressure switch connector.

NOTE: THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 2.7L ENGINE.

SYMPTOM/CONDITION:
With a hot engine the oil pressure light may be on or flicker on at idle.

DIAGNOSIS:
Verify engine oil pressure as described on page 9-21 of the 1999 Concorde/Intrepid/LHS/300M service manual (Publication No. 81-270-9140). If engine oil pressure is within specification perform the Repair Procedure.

PARTS REQUIRED:
Qty Part No. Description
1 05017800AA Wire Terminal/Vent


REPAIR PROCEDURE:
Raise vehicle on a suitable hoist.
Remove engine oil pressure switch connector from switch.
Remove sealing dart from the empty cavity at the rear of the connector.
Pull terminal locking ring outward from front (switch) side of connector to gain access to terminal locking tabs.
Install wire terminal/vent, p/n 05017800AA, in place of the removed sealing dart. Slide locking ring back into place.
Attach the connector back on the oil pressure switch.
Spot tape the wire/vent to follow the harness towards the top of the engine compartment.

Aug 31, 2010 | 2004 Chrysler Sebring

1 Answer

Moyor knocking om lhs 3.5 ho.


good used engine about 500-6000(30 day warranty). 250 labor; with tax-850-950

Aug 30, 2009 | 1999 Chrysler LHS

1 Answer

Stall as soon as oil light came on..92 sundance


I don't think a 92 sundance will shut the fuel pump down when the oil pressure is low, but it might. Can you get it to run on carb cleaner. If it is oil pressure, the car should start then run a few seconds and die. Have you checked the timing belt? If it broke the distributor will stop turning which would stop the oil pump.

Jun 05, 2009 | 1992 Plymouth Sundance

1 Answer

1994 Chrysler LHS Starting Problems


it's either a spark or fuel fault , if there is spark after it shuts down it is a fuel fault. connect a pressure gauge in the fuel line, start the engine , note fuel pressure around 35 psi , stop engine , pressure should drop a little then hold, if not check pump return valve and pressure regulator , check fuel flow , if low replace fuel filter,

May 05, 2017 | 1994 Chrysler LHS

1 Answer

1999 chrysler 300m stalls when coming to stop and low power


Change the Cam Position Sensor.. It done the same thing on mine. The sensor runs about
40. to 60.00 at most parts stores Your gonna have to take off the upper intake or plenum to
get access to it. Top of the engine right side, you'll see it

Nov 28, 2008 | 2004 Chrysler 300M

Not finding what you are looking for?
1999 Chrysler LHS Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...