Question about 2003 Chevrolet Suburban 1500

2 Answers

Does the A/C compressor on a 2003 Suburban 6 ltr operate off the serpentine belt or from a separate one.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,190 Answers

Hello: It has a smaller serpentine belt behind the larger belt. It also has its own tensioner (these often failed) To replace the belt for the compressor the other belt has to be removed first.

Posted on Apr 04, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

There;s only one belt. Sometimes when the compressor fails you can get a different belt that goes around everthing except the AC. compressor so you can run with out it as it might be locked up and too expensive to repair.

Posted on Apr 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i drive my 2003 accent without a ac compressor belt


You can if you don't have a serpentine belt/ 1 belt. But more than likely it does.

Mar 04, 2015 | 2003 Hyundai Accent

1 Answer

Smoking belt


Not knowing if you have a single serpentine belt or separate belt for the AC compressor, this is most likely the compressor bearings out. If the belt is smoking, and it has its own AC compressor belt I would recommend cutting the belt off so it does not break and cause other damage under the hood.

Aug 27, 2014 | 2001 Ford Taurus

1 Answer

Installing a serpentine belt on 2004Suzuki LX7 I Need step by step instru and diagram and will belt for 2007 fit 2005 suzuki


my books show that a 1.8 to 2.3 ltr 1996 -2007 have too different belts one for ac and one with out
2.0 ltr for 1999 to 2009 have a total of 6 different belts so check what your engines are and wether there is ac in the system or not

Jul 21, 2014 | Cars & Trucks

1 Answer

Can I just replace the serpentine belt for power window on 2003 dodge durango


Your very confused

The door window & the engines serpentine belt
& whatever motor your taking about-- are two
separate things

Start over

Dec 05, 2012 | 2003 Dodge Durango

2 Answers

I have a 99 chevrolat suberban 1500. Is it possible to bypass the a/c compressor, and use the same belt?. If not what type of belt do I need?


Bypassing the AC compressor is not done with a belt, all modes and engines have but one belt number, what is done is that a AC bypass pulley is installed in place of the compressor. These bypass pulleys are little motre than the cost of a belt, they are made by GM as a replacemement part and in the aftermarket by a comapny named "DORMAN" any good parts store like Napa or Carquest can order the pulley you need. here is a picture of a typical pulley

emissionwiz_6.jpg

Nov 05, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

Replacing Serpentine belt on 2003 Chevy Suburban


The routing diagram should be at the front of the hood.Use a rached with short extention to move the tensioner on the belt for removal and replace..Hope this helps.

Aug 18, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

Please show diagram for replacing serpentine belt


How do you bypass the serpentine belt from the a/c compressor the reg belt is 85in

Oct 25, 2009 | 1999 Ford Taurus

1 Answer

Serpentine belt slips off idler pulley


The A/C pully is supposed to spin freely until the AC is activated to run.. The cranshaft pully does not. Replace the tensioner pully. The belt has to fit in between the grooves on the pullys.

Apr 05, 2009 | 1994 GMC Suburban

1 Answer

Serpentine belt


the belt is being pulled by a spring loaded pulley. this pulley could be lift by using an exact box wrench that would fit at the front nut and turn the wrench to the left. the pulley would then raise and you can slide the belt off the pulley. be careful when releasing the pulley because the tension is really big.

another precaution also is to remember where the belt loops on the pulleys. it is very hard if you don't take a note on that. there are a lot of combination but only one will work.

tnx 4 using fixya.

drcool

Sep 08, 2008 | 2003 Chevrolet Suburban 1500

1 Answer

1989 chevy suburban 5.7


You need to purchase an A/C compressor deletion pulley from an auto parts store. This takes the place of the compressor pulley, so that your serpentine belt will still work. They are about $60.
Charlie

Aug 19, 2008 | 1989 Chevrolet Suburban

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...