Question about 1989 Toyota Camry

1 Answer

CAMRY 89, V6, AUTO TRANS PROBLEM IS IDLE DROP SHAKING BAD WHEN ONLY PUT GEAR IN DRIVE, REVERSE, NEUTRAL, AND PARK NO PROBLEM, I HAVE CLEAN IAC VALVE WON'T GET BETTER, HOW FAR IAC VALE MOVE FROM OPEN TO CLOSE POSITION? THANKS YOU FOR YOUE HELP

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

If it were an IAC problem it would do it in reverse also. A bad engine mount can cause shaking in one direction but not the other, Also check your vacum hoses and lines.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHILE DRIVING


10 Most Common Transmission Problems

www.transmissionrepaircostguide.com/10-common-transmission-proble...
Ever notice that while driving that the car hesitates or refuses to go into gear? ... For automatic transmissions, you might notice that when shifting into drive or park ....Neutral and park gears no problem, but drive, 1st, 2nd and reverse engages ...

Trans Goes Into Neutral While Driving - Transmission ...

www.transmissionrepaircostguide.com/topic/trans-goes-into-neutral/
Jun 5, 2015 - When I put it in drive, and begin to drive away the transmission will put itself in neutral. When I slow back down, it will go back into gear.

Jan 13, 2016 | Cars & Trucks

1 Answer

Merc clk 1999 fault


on most cars, you need to change the neutral safety switch. this car has a neutral parking position sensor, you can find it for v6 not v8, it also fits a saab 9-3. it is the same thing, a different style. however, check the transmission fluid level and troublecodes for p07xxs. reset the code and use the transmission dipstick by dorman add lucas auto trans fluid, not stop slip to the fill line. most of the time it's not the solenoid, but the auto trans plate, overfilling the fluid can cause it to trigger a check engine light, and the fluid leaking onto it can cause it to be permanently damaged, it's more than $400 for the part. lucas works in the 722.xx transmissions, most , all, clks 99-2002, just make sure the tranny model isn't a 238. i like it better than atf 134. However, these parts are very heat sensitive. fill the trans fluid, reset the troublecodes, do a general motos drive cycle from obdii.com if it doesn't drive good after four times, change the neutral safety switch. :)

Nov 13, 2015 | 1999 Mercedes-Benz CLK

2 Answers

Why wont my toyota camry 3.0L v6 move in reverse


you need to check your reverse gear switch for cleaness,then clean it ,see how it goes

Jul 21, 2014 | 1996 Toyota Camry

1 Answer

2005 chrysler town and country when i start the van it shaking vibration hard in park and in reverse it and in neutral and in drive it perfect.it drives good on highways no shaking


try to increase the idle-rpm..
Example - at standstil condition when you start your van, have look at rpm... say 1000 or 1200 or 1500.. whatever it may be..
Keep idle-rpm a little bit higher, if previously it was 1200rpm then set it to 1500 rpm..
If the problem is solved then..
1) clean ur airfilter
2) check spark plug condition
good or bad... if bad then replace..
3) check fuel supply line, if it is damaged or folded

Nov 22, 2013 | Cars & Trucks

2 Answers

1991 camry v6 - auto tranny shifts hard going into reverse and drive but otherwise shifting normal through the gears while driving.


Make sure your transmission fluid is fully topped up. If the transmission has to speed to build up fluid pressure there will be jolt as the drive is engaged from neutral. Make sure you fill up with the right fluid (use the transmission dip stick tube as the fill point). Also when measuring transmission fluid level have the engine running in 'park'.

Jun 15, 2011 | 1991 Toyota Camry

2 Answers

My 96 Mustang GT engine will idle fine in park or


it sounds like either the torque converter solenoid is stuck or the torque converter itself is bad

Sep 10, 2009 | 1996 Ford Mustang

1 Answer

89 Jeep Wrangler. Engine stalls only when I put into gear.


it might be getting to much fuel check the fuel screw

Jun 10, 2009 | 1989 Jeep Wrangler

1 Answer

Transmission-problem. Park Avenue 89 in Norway.


Sorry the transmission on these cars are know to go bad. I think it's time for a new transmission. Check the transmission fluid and if it's dark red and seams burnt. Your transmission need to be replaced

Apr 08, 2009 | 1989 Buick Park Avenue

1 Answer

'89 Camry Engine Revving in Park


You either have an intake manifold leak, a defective trottle position sensor or a stuck idle speed control valve.

Oct 11, 2008 | 1989 Toyota Camry

Not finding what you are looking for?
1989 Toyota Camry Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...