Question about Chevrolet Blazer

2 Answers

I have a 98 chevy blazer 4x4 that won't go into 2x4 or 4x4 all it does it make a grinding noise and won't move at all.I can here the tccm clicking and the transfer case trying to do something when I'm pushing the buttons,but it still comes out to nothing.What can cause this problem

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

I am not sure which version you have but if the transfer case has 4WD Low then you can only shift in or out of it when the transmission is in neutral - not park. The gears in 4WD low have to have the trans in neutral to be able to move back out and park will not do it. All my trucks are like this.

Posted on Apr 04, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

If you have checked the trans, your transfer case is bad. you need to replace the transfer case.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A buddy of mine has a s10 2001 blazer and the 4x4 isn't working, and was wondering how to replace the vacuum hose, if this is causing the problem?


2001 does not utilize vacuum to engage the front axel. A cable is used. There are a few conditions that can cause this. The most likely is the encoder motor. It's best to have the vehicle scanned. The TCCM is located behind the right kick panel, sometimes if it's unplugged and plugged back in, it will begin to work again.

Feb 28, 2013 | 2001 Chevrolet Chevrolet Blazer

1 Answer

My atc fuse would keep blowing I put a bigger fuse it didn't blow that but I herd a zap noise from my TCCM now my 4x4 won't work 1999 jimmy


What you have done? You Just damage the TCCM and that's why you will not manage to shift 4x4. Why this happened? Because you had shortage somewhere and you receive blown ATC fuse.You put a bigger fuse in capacity where the was stronger to blown and the fault moved to the tccm system which was not protected and blown.Ask for an expert to check and see whether the fault is easy to get fixed.

Jan 02, 2013 | 1999 GMC Jimmy

1 Answer

I have a 98' Chevy 4x4 blazer. When exccelerating


Check condition of tyres.
Also jack the vehicle up and spin each wheel, listening for a wheel bearing noise.
Another possibility might be either the differential or any drive shaft couplings.

Nov 08, 2012 | Cars & Trucks

1 Answer

My 98 dodge ram won't go in to 4x4 where can I


i would start with the transfer case . check fluid level and also check your shift linkage to transfer case. also could have worn chain and gears. Is there any grinding noise when you try to shift into four wheel drive ?

Oct 23, 2012 | Cars & Trucks

1 Answer

My sister instead of turning on the rear wiper she turn on the 4x4 now it s making a strang e sound when is moving in reverse what i got is a chevy 1994 blazer s-10 4.3 l vector engine how do i get it...


Turn on engine. Put foot on brake & shift into neutral. Push button marked 2 wheel or 2x2. Shift back into park. Providing nothing is wrong with system it will now be in 2 wheel.

Sep 30, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

MY 93 blazer won't shift into 4x4. When you turn ignition on the 4x4 lights don't come on and when you press the 4x4 hi the 4x4 lo lights and also when you press 4x4 lo it lights but nothings happens. I...


Have you performed the system relearn after you replaced these parts?? This must be done after the TCCM, transfer case motor, or switch is replaced. DIsconnect the battery for at least 2 and a half minutes. Reconnect the battery. Cycle the ignition key 5 times to the run position, then to the off position. Allow 1-2 seconds after you turn it ON, before you turn it OFF during the 5 cycles. After this start the vehicle, and the system is now reset. It may or may not fix your problem, but it needs to be done after any 4x4 part is replaced.

Feb 23, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

2000blazer 4x4 willnot disenage


fixed the problem remove ground on battery for 5 min then replace it resets the control module

Jan 23, 2009 | 2000 Chevrolet Blazer

1 Answer

98 chevy s10 blazer turn signal


Unplug the turn signal relay from the fuse box and start you engine. Does it still make that noise?
If yes... Put the relay back in, that is not the problem.
If No...Then the relay could be bad, replace it!

PLEASE RATE THIS SOLUTION! Thank You Very Much!

Nov 25, 2008 | Chevrolet C1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...