Question about Hyundai Tucson

1 Answer

Need to remove the manual shift knob - Tucson Hyundai Cars & Trucks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 32 Answers

Where it shows you the gear diagram on the shifter knob that is a cap that you pop off and under it is a nut that you unscrew.

Posted on Apr 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the old gear shift knob and install a new one in my 2000 SLS Cadilac


There is either a small 'c' clip on the front/bottom side or it has an iternal snap ring. If it is the 'c' clip you should see a small slot that you can pop the clip out. If it has the internal one, it pulls straight up and off. Warning: Do not twist it, you will break something expensive in the shifter. From the service manual....

Detaching the shift control knob from the shift lever may require a large amount of physical effort.
Do not twist the shift control knob while pulling.
Firmly grasp the shift control knob.
Pull straight up to detach from the shift lever.

Installation Procedure
Align the shift control knob to the shift lever.
Firmly press down on the shift control knob in order to attach to the shift lever. An audible sound will be heard when the internal clip is fully seated.
Here's a video too!...
How to Remove shift Knob Cadillac Seville

Jun 03, 2015 | Cars & Trucks

1 Answer

Change gear knob


This is an "it depends" answer. It depends on the type of gearshift knob and its installation. If your vehicle is equipped with a manual shift and the shift lever is little more than a steel rod sticking up from the console, then it is easy to replace.

To replace it, simply do this:

1. Set the parking brake
2. Take the car out of gear
3. Center the gearshift
4. Place a piece of cloth around the gearshift knob to prevent damage
5. Place a ViceGrip (R) or pair of pliers around the cloth on the gearshift knob and gently begin turning the knob to the left
6. Spin the knob off the shaft

Remember, though, this works only if the gearshift knob does not have another function combined. For example, you might find a reverse gear actuator on the top of the gearshift knob or you might find a reverse actuator button on the front face of the gearshift knob. This type of combined function gearshift knob is usually found on automatic transmissions.

If you want to remove the gearshift knob from this type of shift, see the service manual and obtain the tools you will need as this type of gearshift knob is much more complex to remove and involves many different systems that have to be addressed before the knob will come off.

It is better to leave this type of fix to trained technicians.

If you need further information or if you would like to see information on automotive safety please visit this site: Safecar infoCar safety Insurance Magazine

Nov 12, 2014 | Cars & Trucks

3 Answers

How do I relplace gear shift?


If you have a stick shift ( floor shift) remove the boot around the gear stick and the insulation on the floor to reveal the 4 bolts that hold the shift turret on to the top of the box. Undo the bolts and lift the gear lever assembly out of the gear box.

May 30, 2014 | 2001 Oldsmobile Alero

2 Answers

How to remove rear cup holder


  1. If equipped with an automatic transmission, remove the shift lever knob by pulling the knob straight up. Then carefully Carefully pry up and pull to remove the transmission shift indicator bezel.
  2. If equipped with a manual transmission, remove the shift lever knob by loosening the locknut and then unthreading the knob from the shaft. Pull up the shift boot to remove.
  3. Pry up and pull to remove the transfer case selector bezel.
  4. If equipped, loosen the console trim panel retaining screws, then carefully pull up on the console trim panel and remove from the vehicle.
  5. Open up the storage box lid on the console and remove the 2 retaining screws located at the bottom of the compartment.
  6. Remove any other console housing retaining screws.
  7. If necessary, disengage the wiring harness connector.
  8. Carefully pull up on the console assembly and remove from the vehicle
  9. If necessary after removing the console unit, remove the A/C-warm air duct from the center of the floor
  10. Installation is the reverse of removal.

Oct 31, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Replace auto shift lever


You need to remove the shift handle first...key must be on...no need to start...pull shift lever down to low gear...look on the back side of the knob...you should see a u-shaped clip head...pry gently under the u-shape with a scredriver to begin removal...then use needle nose pliers to completely pull the clip out...after this is removed...you will be able to kift the shifter knob off...Don't know if you mean replace shift knob...(known for breaking) or actual metal shift lever...if you need the shifter arm, your best find would be at your local salvage yard...some will remove for you...some will let you find your model and remove yourself...To re-install put the shift knob back on the shift lever...to lock in place then re-insert the u-clip to lock in place...Many good mechanics are not familiar with removing these shift knobs...Hope this helps.

Feb 14, 2011 | 2001 Oldsmobile Alero

2 Answers

How do I remove the console from a 2007 hyundai santa fe? I'm stuck at the shift knob.


From the factory service manual

1. Remove the screws holding the console side cover and remove the side cover.

2. Remove the screws holding the floor console assembly and then pull out the floor assembly. (looks like a two screws inside the arm console in the diagram)

Here is a link to a factory service manual for your SUV. Hyundai Service Manuals

Sep 27, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

How can I remove gear shift knob on a 2003 Navigator?


it looks like you disconnect the shift cable and remove the center console finish panel with the shifter.


SECTION 501-12: Instrument Panel and Console 2003 Expedition/Navigator Workshop Manual
REMOVAL AND INSTALLATION Floor Console —Front, Navigator Removal and Installation
  1. Apply the parking brake.
  1. Position the front seat forward.
  1. Remove the two front floor console rear bolts.
  1. Position the front seats rearward.
  1. Disconnect the battery. For additional information, refer to Section 414-01 .
  1. Remove the pin-typ retainer and the window control switch panel.
    • Disconnect the electrical connectors.
  1. Move the shift lever to NEUTRAL and position the shift indicator bezel aside.
  1. Remove the screws and the center console finish panel.
    • Disconnect the electrical connectors.
  1. Disconnect the shift cable.
  1. Disconnect the front floor console electrical connectors.
    1. Loosen the electrical connector bolt.
    1. Disconnect the connector.
    1. Disconnect the electrical connector.
  1. Remove the front floor console side finish panel.
    • If equipped, disconnect the electrical connector.
  1. Remove the front floor console front bolts.
  1. Remove the floor console.

Apr 17, 2009 | 2003 Lincoln Navigator

1 Answer

Manual shift knob removal for chrysler crossfire


I think there is a set screw in the side you have to loosen and then unscrew knob

Oct 18, 2008 | 2006 Chrysler Crossfire

1 Answer

Removal of gear shift knob


There are two types of shift knobs. One that unscrews and one that the lower trim of the shift knob separates from the knob using a trim stick. After separating the lower trim from the knob pull upward to release the knob from the shift lever. If a new shifter assembly is being installed, unscrew the original shift knob or separate the lower trim from the knob and pull up to remove the knob from the shift lever. Screw the knob onto the new shifter assembly's lever no more than 14 turns or install the lower trim onto the shift lever then push the knob onto the shift lever and install the lower trim piece onto the shift knob.

Jul 02, 2008 | 2007 Dodge Magnum SRT8 Wagon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...