Question about 1997 Pontiac Grand Prix

1 Answer

How do you take the outside cover of rear lights

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

In the back of the trunk. there should be 2 or 3 plastic knobs that holds the assembly on. you might have to look under the carpet behind the lenses.

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change light bulb


the light sockets should twist off so you can remove the bulbs were the wires go in to the bulb socket

Aug 21, 2014 | Cars & Trucks

1 Answer

Replace rear side marker light


I had this message sent to me to solve....THIS IS MY QUESTION THAT I ASKED....LOL....SINCE THEN; I'VE BEEN INFORMED THAT YOU HAVE TO GO THROUGH THE OUTSIDE TAIL-LIGHTS TO GET TO THE MARKERS
DOES ANYONE ELSE KNOW ANOTHER WAY?
I have stainless steel covers over my tail-lights and will have to remove the "adhesive" on the covers to remove the tail-lights...HELP!

Jul 05, 2014 | 2007 Chevrolet Corvette Convertible

1 Answer

How do you remove the rear fenders on a 2001 vw beetle do you have to drop the gas tank?


no the gas tank has nothing to do with it ..first thing is that the two rear fenders and rear bumper cover are bolted together and must be removed as a unit. First thing remove the inner fenders on both of the rear tires then look up and remove the T30 torq bolts and 10mm nuts on bottom the brake light housings must be removed from inside of the trunk there are 2 covers in the corners pop them out and ther will be a plastic knob remove taking care not to drop them then pop out lights with a small flat tip screwdriver unplug lights then take loose the gas door screw and remove clip holding the latch then pull out latch taking care to not break it. then remove all the screws on the outside under the rear deck lid T30 torq .gently pull on fenders and pull off the rear fender/bumper cover assembly taking care to not pull out oo far then take off 8mm nuts from heat shield on left backup lamp and unplug lights ..there u go the all u have to do is unblot the fenders and ur good to go

Jan 17, 2011 | 2000 Volkswagen Beetle

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

1 Answer

I need to replace the driver's side brake light.


Rear Combination Light- 2007 might vary from these diagrams:
Removal & Installation 2004 (Early Production) 4 Door To Remove:
  1. Disconnect battery negative cable.
  2. Disconnect electrical connector. Rear Combination Light kia-06-18-7495.gif

  3. Remove 2 screws and 2 nuts and remove light assembly.
To Install:
  1. Install light assembly and 2 screws and 2 nuts.
  2. Connect electrical connector.
  3. Connect battery negative cable.
5 Door To Remove:
  1. Disconnect battery negative cable.
  2. Disconnect electrical connector. Rear combination light kia-06-18-7496.gif

  3. Remove 2 screws and push light assembly toward outside of vehicle. CAUTION
    Use care to not damage gasket.
  4. Pull rear combination light from vehicle.
To Install:
  1. Install rear combination light and 2 screws.
  2. Install 2 screws.
  3. Connect electrical connector.
  4. Connect battery negative cable.
2004 (Late Production), 2005-2009 To Remove:
Turn Signal Lamp kia-06-20-7698.gif

  1. Disconnect battery negative cable.
  2. Remove 2 screws and cover inside trunk.
  3. Remove 4 nuts and disconnect electrical connector (A).
  4. Remove rear combination lamp.
To Install:
Turn Signal Lamp kia-06-20-7698.gif

  1. Install rear combination lamp.
  2. Install 4 nuts and connect electrical connector (A).
  3. Install cover inside trunk and install 2 screws.
  4. Connect battery negative cable.
prev.gif next.gif

Oct 28, 2010 | 2007 Kia Spectra5

1 Answer

Right rear brake light out


Open the back hatch and (if no screws on the outside of light cover) and look for a "door" or door panel that covers the inner side of the lights. Once this is off, find the brake light buld, twist and pull,or just pull out depending on bulb type. Put new bulb in, put door/cover back on, check brake light.

Oct 19, 2010 | 1998 Ford Explorer

1 Answer

How to change a tail light


1. Remove the two screws at the outside back of the tail light cover
2. loosen the tail light cover from the two clips at the front of the cover by gently prying it toward the rear. Fingernails worked for me. The bottom clip seemed easier. If it is too tight, try a screwdriver near the bottom, then near the top prying toward the rear of the car.
3. the top light is the backup lamp (white), and the bottom light is the brake/turn/rear light (red).
4. rotate the lamp 1/3 turn to remove and replace.
5. test.
6. replace the cover by aligning the screw holes then pushing the cover into the clips and replacing the screws.

Oct 16, 2010 | 2005 Ford Freestyle

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

To remove rear combination light: nissan altima 2005


open trunk and pull back cover remove three 8mm nuts and then with a plastic spoon place on outside of car between light and quater panel with a little pressure pry with spoon while pulling backwards on light assemble

Jan 16, 2010 | 2005 Nissan Altima

1 Answer

Replace brake light bulb 1999 lexus es300


The outside brake light bulbs are changed by removing the entire light module from the body. The module is held in place by two screws hidden by round plastic covers that pop out with a small screw driver. You will see the two round screw covers along the rubber moulding when you open the rear hatch. The outside edge of the module is plugged into the body with plastic prongs that will pop loose will you pull the module with your hands. The module will now only be attached by the slack bulb wires and you can twist the socket out of the module from the back.

Aug 05, 2009 | 1999 Lexus Gs 300

Not finding what you are looking for?
1997 Pontiac Grand Prix Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...