Question about 2007 Mazda 3

1 Answer

Code c1277 (steering angle sensor)

This is a 2007 Mazda3 that was in a crash. all steering parts have been changed including steering angle sensor and module and wiring has been repaired and tested.
dealer installed new steering sensor. however, traction control light stays on in instrument cluster.
it is believed but not confirmed if dealer reflashed new module and sensor. is there a way to know why code c1277 keeps coming back?

Posted by on

  • Anonymous Feb 20, 2009

    Having the same problem myself. Will let you know how i get on fixing it.

  • Anonymous Mar 13, 2014

    Code U0155

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

This vehicle uses a steering control module and the antilock control module. Both modules get a signal from the steering angle sensor. We found that the steering module didnot show a steering sensor code but the ABS module did show the code.
after checking that the wiring was intact and with good continuity, it was determined that the fault lies in the ABS module.
A new ABS module and configuration confirmed the diagnosis. It's fixed!

Posted on Aug 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an error on my 2009 mazda 3 demio on running diagnostics i get an error B2278 steering shaft torque sensor malfunction and the steering loses all power steering ability...help???


Recall Number
10V374000 Recall Date
08/12/2010 Component
STEERING:ELECTRIC POWER ASSIST SYSTEM Summary
MAZDA IS RECALLING CERTAIN MODEL YEAR 2007-2009 MAZDA3 AND MAZDA5 VEHICLES MANUFACTURED FROM APRIL 2, 2007 THROUGH NOVEMBER 30, 2008. THESE VEHICLES MAY HAVE A CONDITION IN WHICH A SUDDEN LOSS OF POWER STEERING ASSIST COULD OCCUR AT ANY TIME WHILE DRIVING THE VEHICLE.
Consequence
POWER STEERING ASSIST IS SUDDENLY LOST REDUCING THE DRIVER'S ABILITY TO STEER THE VEHICLE AS TYPICALLY EXPECTED, AND INCREASING THE RISK OF A CRASH. What Owners Should Do
MAZDA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE POWER STEERING PUMP AND LINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.

Jan 30, 2017 | Mazda 3 Cars & Trucks

1 Answer

2007 xterra had trans rebuilt VDC light on constant and slip will come on and the go off no codes sowing or ABS?


I know this VDC is commonly due to a steering angle sensor.
You need to use an ABS scan tool and check for the following codes.
C1143 (steering angle sensor circuit)
C1144 (steering angle sensor signal)
C1156 (steering angle sensor com cir)
C1163 (steering angle sensor safe)

Dec 28, 2016 | Cars & Trucks

2 Answers

I have a 2007 Mazda3 & it's not shifting correctly These are the codes im getting Would it be completely necessary to repair the transmission or if it can be fixed by replacing celonoid B or the pack


Without it being on a scanner in front of me, I would change solenoid B first. But when you get to the solenoid, check the plug for power and ground with the key on. If it is good then replace it. Then if you still have the intermittent TCC. replace the internal harness of the transmission.

Aug 06, 2015 | 2007 Mazda 3

1 Answer

Location of 2002 Toyota Highlander Yawrate Sensor?


I'm sure your mechanic read code for yaw rate malfunction.
yaw rate is a sensor on the base of the column and read the steering angle.any time you do alignment or replace steering parts the angle change and the sensor read +or- off zero. driving for some times computer will call for sensor problem.
First make sure the car drive straight,no suspension or steering problem, tire size and pressure is the same and find mechanic with advance scanner to program the sensor to new ZERO.
Don't replace the sensor before give hem the second chance. the new sensor need programming to.
Good Luck

Jan 17, 2015 | Toyota Cars & Trucks

2 Answers

My slk 280 says take to shop for esp on the dash. why?


Because you have a fault code & dash light on

The ABS System may have a problem

Google what ESP is about

No --you can not get it off your dash

You can & it will come back, until you
make the repairs

Sep 27, 2014 | 2007 Mercedes-Benz SLK 200

1 Answer

Steering angle sensor resetting


Have to reset the angle sensor, I would guess

Have to check for codes & data with professional scanner,
in enhanced mode

If you changed the rack, it has to be aligned,the shop should
do what is necessary

A 5 year old vehicle should not need any of that work for years
---so why are those parts worn out?

You do both lower ball joints, not one side,like when you do a
wheel hub bearing, you do both sides

Mar 26, 2014 | 2008 Jeep Patriot

2 Answers

2005 dodge sprinter van with dtc p2240


2002 sprinter, code # P2240 = abs steering angle sensor can message implausible, this can be due to a bad steering angle sensor or can bus circuit open. you will need to do some testing and a scan tool would be needed to see sensor readings. take a look at the connector and the wiring,CAN is a controller area network, this is the computer system, the way it communicates.

Mar 20, 2011 | 2007 Dodge Sprinter

1 Answer

I have a Mazda3 2007 and it has a check engine code of p2251, can you help? Car also hesitates


The P2251 error code means you will need to replace the front O2 sensor (the oxygen sensor that bolts into the exhaust manifold accessible under the hood)

Jan 27, 2011 | 2007 Mazda 3

1 Answer

The steering wheel on my bmw 7 series 2003 730ia model is self adjusting after a change of steering angle sensor and steering column switch.please help


Read the owners manual on resetting your door control seat preference this will include steering column and pedal adjustment if installed on your 7.

Jul 02, 2009 | 2003 BMW 7 Series

Not finding what you are looking for?
2007 Mazda 3 Logo

1,912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...