Question about 2002 Toyota Camry

Open Question

I bought a car that comes with a ca425 model code alarm. I didnt know of that alarm until i accidentally turned the valet switched on and off and the alarm went off and and i was not given of the remote for the after market alarm. I just took off the circuit breaker to disable it but keeps going off when i put it back. Bought a compatible replacement remote from ebay but does not come with programming instructions. How can i program the replacement remote when the alarm is going off when the breaker is replaced?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
BigKahunaGuy
  • 20 Answers

SOURCE: keyless remote programming insyructions

If the remote is generic you will need the factory remote to "clone" the signal to the new remote.

With your oem pontiac remote you may need to visit any GM service center to have the remote set to the cars receiver. There are literally 100,000 different variables GM uses to ensure one remote can't work the wrong car. A typical key programming will run you between $30-$60 depending on how much greed the technician has. Some good technicians will do this job for free simply to make a customer happy so you may wish to call around.

Posted on Aug 17, 2008

Ad
  • 1861 Answers

SOURCE: 1993 Toyota Pickup Alarm

Glad to be of service. The graciousness of a FIxYa rating would be most appreciated.

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: program my remote

Program your factory keyless entry functions
For 2001+ Tacomas equipped with a factory alarm or keyless entrymag-glass_10x10.gif, here are some programming options that allow you to adjust the way your locks work.
The first programming option allows you to set the entry unlock to: (A) unlock the driver door with one push, and the remaining doors with a second push OR (B) unlock all of the doors with a single push.

  • Open the driver's door. Remove the key from the ignition switch.
  • (Complete these steps within 40 seconds)
    1. Insert the key into and remove it from the ignition switch 2 times.
      (IN - OUT - IN - OUT)
    2. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    3. Insert the key into and remove it from the ignition switch 1 time.
      (IN - OUT)
    4. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    5. Insert the key into the ignition switch and leave it in.
    6. Close the driver's door.
    7. Turn the key from LOCK to ON 4 times, ending at LOCK
      (LOCK - ON - LOCK - ON - LOCK - ON - LOCK - ON - LOCK)
    8. Wait for the locks to stop, then remove the key from the ignition switch.
  • On the key fob, press and release both LOCK and UNLOCK buttons at the same time.
    1. [For all doors unlock] press and release the UNLOCK button.
    2. [For driver door unlock] press and release the LOCK button.
  • Open the driver's door. The programming is complete. If programming did not occur, start over.

Posted on Feb 25, 2009

polarcycle
  • 1392 Answers

SOURCE: is there a way to diable vehicle alram system so car can stay running

You should be able to take it to the dealer and have them disable the VTSS. Look for about an hour labor to do this.

Posted on May 30, 2009

  • 634 Answers

SOURCE: where is

is this factory or aftermarket alarm? try looking from floor along bottom of dash on drivers side for a small button this is most common mount point, if u can't find ask merchant who installed where they put it

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Security system I bought a 93 Grand Cherokee used & not running.Ive fixed it & drove it for two days.While trying to fix the power windows I woke-up a security system that I didnt even know I...


If it's the factory security system that honks the horn and flashes the headlights, you can shut it off by turning the key in the door cylinders or in the rear tailgate key cylinder. If it's an aftermarket alarm, look for a small silver switch under the dash and usually turning the ignition on and flipping that switch will permanently put the alarm into valet mode. Good luck.

Mar 16, 2011 | 1993 Jeep Grand Cherokee

1 Answer

I have a 2000 dodge intrepid. The alarm never worked on it. We bought it used and all of a sudden when we go to unlock the door it turns on. Now the car won't start. I've looked online for answers and...


The 2000 Dodge Intrepid is equipped with an alarm system that is triggered when unauthorized entry is attempted. In some situations, such as having the Intrepid valet parked or when it is being serviced by a mechanic, the alarm system needs to be disarmed so it doesn't go off. Disarming the alarm will prevent it from being activated until it is armed again.
Difficulty: Moderate Instructions

  1. 1 Insert the key into the ignition.
  2. 2 Turn the ignition switch to "ON." Do not start the engine.
  3. 3 Press and hold the valet/override button within five seconds of turning the ignition on. The valet button is located beneath the steering column.
  4. 4 Release the valet/override button after the security indicator light turns off.
  5. 5 Turn the ignition switch off.


have to do it in this order

Dec 10, 2010 | 2000 Dodge Intrepid

1 Answer

I lost the alarm key my car a wile back and this morning i had some trouble with the battery, and now the alarm is on!! I can't turn it off with out the key right now, i'd like to know the alternative...


the alarm sensed that the battery is low and turned on .thats how they operate it thinks its being stolen,try to take the connection off the battery wait for a minute and connect.if not look for a small toggle switch or black push button which is your valet switch.with key on either flick the toggle switch or hold the button in until the alarm goes off.then it will be in valet mode.car should start

Aug 21, 2009 | 2002 Toyota ECHO

1 Answer

Valet Switch/Button


Contact a dealer for the location of switch

May 02, 2017 | 2002 Mitsubishi Galant

1 Answer

My keyless entry remote stopped working so i had unlock the door through a cracked window.... the alarm went off, but when i started it, the alem didnt stop.... now when i dont lock it and open the door or...


yes the remotes do have batteries. how ever that might be your problem or the remotes lost its code for programing. step when turning alarm off---- if its a factory alarm put the key in the drivers door when the door is closed and lock then unlock it thats the manuel shut down for factory. step 2------- aftermarket alarm. look for a valet switch most likely it would be installed by the driver kick panel or by the under dash fuse box. when u find it put the key into the ignition. turn it to the run position. within 3 seconds press and hold the valet switch for 3 to 5 seconds you should here a confirmation chirp and the led light will stay on solid and wont blink give it a world let me know what happens

Jun 10, 2009 | 1999 Oldsmobile Aurora

1 Answer

Need to turn the valet switch off On 1999 Nissan Maxima


Look for alarm Brain box and look for wires coming out black and red going to valet switch. to turn valet on turn ignition in ON position and press-switch or flip depending on the type of switch. If it a basic alarm just disconnect the main wiring harness to alarm box- unplug and the car should start. Good luck and thanks for using FIX YA

Jan 26, 2009 | 1994 Nissan Maxima

1 Answer

How do i turn off alarm temporarily(valet feature)?


First you have to know where the valet switch is located. When you locate the switch turn ignition to on position ans flip the switch. the led light for the alarm should stay on STEADY (with out flashing).

Dec 09, 2008 | 2003 Honda Element

1 Answer

I hope you can help me!!!!!!


It sounds as though you are having a security (alarm) system issue. Does this vehicle have an aftermarket alarm installed? If you recently bought this car, it might have one that you don't even know about. Try locking and unlocking both front doors with the key. If the vehicle has a factory alarm system, this is the usual way to deactivate it. If that does not work, look up behind the dash on the driver's side. An aftermarket alarm system is usually pretty easy to spot as it'll have a bunch of wires connected to it that are usually wrapped in black tape and you can tell it's not factory installed. If this is the case, there will be a valet switch somewhere in the vicinity of the driver's kick panel. To turn the alarm off, turn the ignition switch to the on position and press the valet switch. This should turn the alarm off.

Jul 21, 2008 | 1993 Chevrolet Suburban

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...