Question about Pontiac Grand Am

2 Answers

In the cup holder by the brake, it has a hole in it and my necklace fell through, need to remove console so I can my necklace.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 638 Answers

Sometimes, you can take a long magnetic screwdriver, and go down through the hole, and hopefull it will retrieve your necklace. on most consoles, there should be some screws to be removed in order to remove the console.

Posted on Apr 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 844 Answers

You can also get a small telescoping magnet from the autoparts store and stick in hole wiggle around and possibly get it that way as well.

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove an in-dash cup holder in my 2005 Chevy Malibu


open the cup holder and under side of holder is a tag that needs to be pushed down whilst pulling gently on the cup holder , if the tag is not under neath it will be towards the dash end of the cup hole , depends on the part supplied at time of manufacture

Apr 26, 2014 | 2005 Chevrolet Malibu

1 Answer

I AM TRYING TO TAKEOUT A CENTER CONSOLE OUT OF A 2000 CHRYSLER INTREPID


Hi Ken, I'm glad to help! Ken I have removed so many of the center consoles on Intrepids, heck I can do it in my sleep. I'm not sure how far you have gotten removing it. But there are some hidden screws under the rear cup holder. Pull the rear seat cup holder out and there is one in the very front and 2 down inside the slot. Those are the only ones you need to remove the other screws simply hold the cup holder in. The rest of the removal is very easy. Hope this helps and have an awesome day Ken!

Apr 18, 2014 | 2000 Chrysler Concorde

1 Answer

Want to remove console to replace cup holder on 05 crossfire.how do you remove hand brake handle?


right above the cup holder is a cover the length of the cup holder remove it pops out.
2 screws hold the cup holder 2 hold the bezel u only need to take the 2 for the bezel out. The rest will pop off and disconnect the connectors for the AC and so on.

Mar 03, 2011 | 2007 Chrysler Crossfire Convertible

1 Answer

I have an '08 TL with a very annoying object sliding back and forth when I brake and accelerate. Sounds like it is under the cup holder. I removed the trim on both sides. That is where I am stumped. Is...


the center console will prob. have to be removed , there are hiden screws, be patiant and thuroly look before just ripping out cup holder.

Feb 11, 2011 | 2008 Acura Tl

1 Answer

How do i remove the centre console on a ford focus c-max


Remove the twi phllips screws under the cup holders. Remove the cover in back of the arm rest. Remove the two phillips screw. Remove the cap covering the last screw in the back of the console. Remove last phillips screw. pull up parking brake,remove console. Good luck.

Nov 12, 2009 | 2000 Ford Focus

1 Answer

Buick Regal cup holder problem


Yes absolutely you can my friend. and you are correct this will fit 1997 to 2004 actually!

Jul 10, 2009 | 1996 Buick Regal Olympic Gold

2 Answers

Remove the door that covers cup holder in the center console of a 2007 hyundai sonata


I dropped a card in between there a few months ago and had to retrieve it. Don't waste your time trying to fish it out..it's almost impossible and very time consuming. All you have to do is pull the rubber out from around the shifter and pry the entire plastic covering up. Be as gentle as possible. It should pop right off. Make sure the pull on the E brake so that you can remove the cover, as well. Hope it works for ya!

Apr 28, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Shift light replacement


First, the bulb is a GE 158.
There are two screws near the back of the parking brake cover (one each side). Move the seats forward to remove them.
After removing the parking brake cover (helps to raise the parking brake), there are two screws at the back of the shift console.
Remove those two screws. Pull out the four 'serrated' push pins under the dash area holding the shift console (two each side). Then pull the cup holder up and out.
You should then be able to remove the shift console. One suggestion- if you need to move the shifter out of park, make sure your parking brake is on! There is a shift release you can depress with a small screwdriver under the little button/tab to the right of the shifter. (Can also be reached under the console with your finger after removing the cupholder.)
The bulb holder is on the driver's side. Only one I assume.
Good Luck,
Robert

Oct 11, 2008 | 1998 Ford Escort

2 Answers

2004 KIa optima center consol


Should be screws hidden under plugs that are the same color as the plastic. Try to remove cup holder etc there should be little pop outs. I will check on one of the kias in the lot. send me a response so I can put you at the top of the list.

Jul 15, 2008 | 2004 Kia Optima

1 Answer

2003 Cadillac Escalade Front console removal


MY FRONT CONSOLE GLOVE COMPARTMENT NEEDS TO BE REMOVED ON MY 2003 CADILLAC ESCALADE TO GET MY PHONE FELL DOWN THROUGH OPEN CRACK.

Jun 28, 2008 | 2003 Cadillac Escalade Esv

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...