Question about 2000 Dodge Intrepid
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 dodge caravan. Speedometer
hi there try to get a price on the speed sensor located on the transmission this sensor tells the computer how fast the van is going in turn the transmission shifts gears and there will be information sent to the speedometer . the reason the van only goes in low gear is to protect the system because the sensor is damaged so replace the speed sensor and try again , let me know how its running after relpaceing the sensor good luck
Posted on Jul 05, 2008
I had the same problem with my 90 daytona. The tach and the speedometer would work intermitantly. I took the whole gauge cluster out, and heated all the soldering with a solder gun to reflow the connections. It seems that this is a common problem with the connections cracking. You may not be able to see the cracks in the solder.
Posted on Oct 31, 2008
i would try the fuses first but if that dosent work try checking the connection between the cluster and the fuse box perhaps it fell outa place.
Posted on Feb 26, 2009
These vehicles seem to have a problematic short, my grandfather has the same vehicle with the same problem, i found the short under the carpet on the driver side of the vehicle, under the gas pedal, sometimes wires can crack and break.
Posted on Jun 01, 2009
In most vehicles there is a wiring harness that runs under your dash to your heater etc. Sometimes the main plug comes loose. If you open up the steering column or somewhere down by your feet on the steering column is the main plug - look in your manual and track the wires with a tester ensuring you have power all the way to whatever is not working. If there is no power at the main plug then you might have a ground problem or a loose wire in the plug itself. Good luck
Posted on Jun 26, 2009
Tips for a great answer:
Apr 08, 2016 | 1996 Nissan Pickup
Jun 06, 2010 | 1997 Ford Escort
Feb 26, 2010 | 2000 Jeep Cherokee
Jan 25, 2010 | 2000 Plymouth Voyager
Jan 09, 2010 | 2000 Toyota Camry
May 25, 2009 | 2000 Dodge Intrepid
Jul 31, 2008 | 2000 Dodge Ram 3500
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: