Question about 2004 Suzuki Verona

Open Question

The DRL light turned on on my dash board...what could it be

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Daytime running lights relay for highlander


Why would you want the dash lights on with the DRL's ? I wouldn't expect them to be on. You would only have dash lights when conditions require you to have your full lights on. I think you are looking for a fault that's not there. If this doesn't answer your question call the local dealer.

Nov 01, 2015 | 2003 Toyota Highlander

1 Answer

The dash board light is on when it should be off, then off when it should be on...


Check to make sure you dimmer switch is working properly... Also if you have DRL (daytime running lights), that would explain the on when not supposed to be condition.

Nov 18, 2013 | 2012 Nissan Versa 1.8 S 4dr Hatchback 1.8L...

1 Answer

Drl light on dash board


The DRL light is for the daytime running lights. Maybe you have a short in the wiring, or a bulb is going bad.

Jun 27, 2012 | 2002 Acura MDX

2 Answers

What is DRL light mean on a dash board on a 2007 honda accord 2.4


The DRL light is lit when the daytime running lights are NOT lit. I just did a fix on my 2001 Accord thanks to this website: http://www.nyx.net/~smanley/hondadrlfix/

Oct 17, 2010 | 2007 Honda Accord Sedan

1 Answer

99 gmc denali dash light, parking lights, tail lights, and dash light dont work. Interior lights, brake lights, blinkers, headlights work Turning on the headlight switch blows number 15 drl-fog fuse...


You have a short to ground somewhere in the drl-fog lamp circuit. Check for obvious wiring connector or wiring to drl & fog lamps. check wiring for pinched or broken wires coming from sockets. If you don't find problem, you can trace wiring from lamps to main harnesses and hopefully find source of short.
hope this helps.

Mar 02, 2010 | 1999 GMC Denali

2 Answers

What is the DRL warning light on the dashboard of my 2007 Honda CRV?


On my 2007 Honda CR-V The DRL code appeared on the dash board. Additionally I had only one high beam (on the passenger side); both low beams were fine, but I did not have a Daytime Running Light on the drivers side. The DRL code was really misleading because the real problem was that the high beam element in the headlight bulb was burned out. Note that the daytime running light is not a seperate bulb -- it is the high beam element which is powered at a low voltage. Once I replaced the head light bulb everything worked fine and the DRL code on the dash board was gone. So if the DRL message appears what you really need to do is replace the headlight bulb (there are YouTube videos which show how to do this - but search for headlight replacement, not for DRL fix). Be careful not to touch the new bulb with you hands since premature burnout can occur from the grease off your skin. I got my bulb from Wal-Mart for $8.88 (it's a 9003/HB2 for the 2007 CR-V) -- that's a pretty cheap fix.

Feb 27, 2010 | 2007 Honda CR-V

1 Answer

Dash light do not come on but lights do for drl on 2005 chev equinox


DRL (Daytime Running Lights) will come on any time you start your car.
The dash lights do not come on, unless your headlights turn on. Either by a daylight sensor or if you manually turn them on by the switch.
So even though your headlights are on with the DRL, if you notice the tail lights do not come on (just like the dash lights don't).

To test if your dash lights do work, turn your headlight switch on. You should the the tail lights and dash lights come on.

Sep 11, 2008 | 2000 Toyota Corolla

1 Answer

Dash light DRL stays on


Bad solders in DRL relay located left side of steering column below change drawer behind dash. It will be indicated with a stamp DAYTIME RUNNING LIGHT RELAY. Remove it and redo the solders to the relay contacts in the unit. This will fix the DRL light in dash, return the DRL system to functioning and will also fix headlight not working problem.

Aug 10, 2008 | 1991 Honda Accord

1 Answer

DRL and High Beam do not work right on Honda Accord EX 1998


Some time back I found some data on a similar website suggesting that the Day Light Running circuit board, just under the steering column, developed cracks in some of the soldered joints. Your high beams should also be affected with loss of day light running lights.
Resoldering repaired the continuity of the circuits. Ours is now working quite reliably. Some of the defective areas developed slight brownish discoloration, that's how I was told to recognise the areas to be resoldered. Hope this will help you solve your problem.

May 24, 2008 | 1998 Honda Accord

Not finding what you are looking for?
2004 Suzuki Verona Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...