Question about Buick Roadmaster

2 Answers

INSTALLED TRANS 700R4 RAN GOOD ALL GEARS SHIFTING PARKED CAR 4 A FEW MIN HAD HARD TIME STARTING FINELY STARTED NOW WONT GET NO GEARS EVEN REVERS ITS LIKE ITS IN NEUTRAL PUT BRAN NEW TORKCONVERDER STILL DOES SAME THING ALL THE GEARS ACT LIKE ITS IN NEUTRAL HEALP

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Buick Expert
  • 294 Answers

Well, to me 2 things may happened, your manual valve in the valve body is detached or... your boost valve pop out, this is part of your pump, ider way remove your trans pan and check for either one in it, or a clip tnat holds manual valve, if your boost valve come apart you need some one that knows how to put it togheter or a manual for specific trans.
good luck

Posted on Apr 03, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 829 Answers

Sounds like a pump problem.Did you install the new torque converter after you started having problems or before?Did you bolt the converter to the engine and then install transmission or did you install transmission with converter in it?

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai tiburon running at high rpms when shifting


hmmm....it would seem as if your trans is having a bit of a hard time shifting so its sort of waiting before it can shift to the next gear (possible the gear system is having a problem shifting due to it sticking to some gears) i'd have to say....a mechanic can take a look to see why its seemingly shifting late at high RPMs to me IMO the trans is just having a hard time shifting with gears wanting to stick together making the whole trans have a hard time shifting

Jan 05, 2017 | Hyundai Cars & Trucks

1 Answer

My 1995 bmw 740il wont shift into manual drive. im not sure what gear cars in but the trans isnt shifting. both of the cables to the throttle is broken i discovered could that be the problem and what


Service the transmission for the shifting issue. However going from auto to manual is an electrical switch. Car wont shift till car is at high enough rpm level.

Aug 05, 2014 | 1995 BMW 7 Series

2 Answers

Changed transmission fluid on crv now car wont start


might be that you accidentally disconnected the crank sensor close to the transmission, this gives a no start condition without a check engine light on most cars...

Apr 19, 2014 | 2005 Honda CR-V

1 Answer

97 town car not shifting from 1st to 2nd gear


Check the Coolant (antifreeze) level. My 94 continental has a hard time shifting from 2nd to 3rd when the level is low. Also, this may indicate that the transmission fluid is too old to work properly. The transmission fluid is cooled at the bottom of the radiator, since cool fluid works better than hot fluid (especially when the trans fluid is old) that could make the transmission not shift properly. Keep the coolant level up until you can have the trans fluid checked.

Mar 10, 2014 | 1997 Lincoln Town Car

1 Answer

My 1990 Chrysler New Yorker 5th avenue will not shift up past second gear.


Probly no one ever changed the trans fluid,now you did and its to late,But get a bottle of Lucas trans slip.cost about 12$ at walmart,put the whole bottle in the trans,it is really thick, so heat the bottle on a register for a good while so that it will pour right in in this cold wheather.Let car run for 20 min. than try driveing it.if it wont move,let it rin another 20 min. if it moves drive it around untill it starts driveing better ,might take up to 3 days to get moved through trans real good.It worked for me on 6 cars now

Feb 25, 2013 | 1990 Chrysler New Yorker

1 Answer

Hi i have a 1996 probe trans went bad so i put a trans from a 1996 contour the bell houseing was different so i chained it i but it in and the trans wont shift right if i put it in dive it takes off in 3...


Your shifting module(netural park switch) on the trans has to line up with the mark or slot. Key on car off block wheels, put car in first and see where the module shifts and do the same for all the gears to see if they are lining up. All so check the shifting cable make sure its at the right length.

Feb 14, 2010 | 1996 Ford Probe

3 Answers

Lost all forward drive and reverse.


sounds like fluid has run fry if auto

Jul 29, 2009 | 1992 Ford Taurus

2 Answers

1991 Caprice No reverse. Moves in neutral. All forward gears OK.


What engine? Rear wheel drive ?Sounds like shift linkage or cable out of adjustment slightly. Have a look at where cable or rod attaches to transmission for adjustment. If not sure of what your looking for get back to me with info.

Mar 21, 2009 | 1993 Nissan Maxima

1 Answer

1992 Nissan Sentra making a hard clunking noise when shifting


when the last time you made a tranny oil change ? or also check the level of oil when all that is done youncan get more technical lets see could be the shift bushing ... easy to install and if its a tranny probleme well maybe time to get that corvette you always wanted go big or go home ahahah good luck

Sep 21, 2017 | 1992 Nissan Sentra 4 Door

1 Answer

700r4


you more than likely snapped your shifter fork in the transmission. your going to have to have that transmission rebuilt.

Oct 03, 2008 | 1994 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...