Question about 2005 Ford Five Hundred

1 Answer

Why does every window work but the front passenger's

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Its sound like you possible have a burnt out window motor, or a bad switch, youll need to remove the door panel and use a multimeter to test the switch and motor

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 Gmc Sierra 5.3 litter SLT. Wire diagram for passanger side power window. No power to door.


Do the power door locks work for that door ? Does you vehicle have door courtesy lights , turn signals on the mirror ? If your vehicle has these other options an they work , you have power to the door . There is an electronic module inside the door ,called passenger door module ! where did you check for power at , the window switch ! These are computer controlled an you would only see a few volts when pushing the switch !

7

  1. Monitor the passenger front window status in the passenger door module inputs list.
  2. Activate the passenger power switch on the passenger door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 8
Go to Step 15

8

  1. Monitor the passenger front window status in the driver door module inputs list.
  2. Activate the passenger front power window switch on the driver door module in the up and down positions.
Does the window status data parameter change accordingly?
Go to Step 9
Go to Step 16
Operate the passenger front power window in the UP and DOWN directions from the master switch.
Does the passenger front power window operate properly from the master switch?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 5

4

  1. Install a scan tool.
  2. Monitor the window lockout data parameter in the driver door module inputs list.
  3. Activate the window lockout switch to both the On and OFF positions.
Does the window lockout data parameter change state appropriately?
Go to Step 5
Go to Step 16
Your best bet is to take this to dealer or a ASE certified repair shop.

Jun 14, 2015 | GMC Cars & Trucks

1 Answer

Master switch power window and locks


master switch faulty if other switches works windows and locks.

Jan 15, 2013 | 2006 Jeep Commander

1 Answer

Passenger front /rear windows will not work 99 jeep gr cherokee


ill suggest theres a broken wire between the drivers door and the body in that accordian looking thing.

Sep 06, 2017 | 1999 Jeep Grand Cherokee

1 Answer

Front passenger power window stopped working. Is


no ,there is a main relay but it controls all the windows, its probably a bad window motor.or poss. a regulator.

Oct 11, 2009 | 1998 Toyota Sienna

1 Answer

The passenger side window does not work. Is this


vice grip? you're lucky you didn't shatter the window.

So only the passenger front window is out based on what you're describing. Or are you trying to say all the passenger windows are out? (you have three passenger windows)

I am going with just the front passenger being out and that neither the switch on the driver's door or the switch on the front passenger door work to control the window. It's rare that both switches would die at the same time, so that rules that out. Now you said you pushed the button and the window does not move, if you don't hear a sound at all, odds are the motor is toast, if you do hear a sound, then the regulator may be stripped or broken.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to remove the motor which will be secured down by a few bolts

Sep 08, 2009 | 1997 Ford Taurus

1 Answer

Window switch for driver control and passenger switch window


sounds like you have a passenger window motor problem. Try hitting the right door panel hard, down near the speaker opening and pushing the switch at the same time. If it moves, the motor windings are and needs to be replaced.

Mar 26, 2009 | 1999 Mercury Grand Marquis

Not finding what you are looking for?
2005 Ford Five Hundred Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...