1994 Pontiac Sunbird Logo

Related Topics:

Posted on Apr 03, 2011

What order do the plug wires go to the coil 2.0 sunbird 94

5 Related Answers

Anonymous

  • 6966 Answers
  • Posted on May 31, 2008

SOURCE: spark plug wiring pattern for 94 sunbird

Hi,

Depends on what engine is there inside.
1. for the 2.0 4 cylinders, 1-3-4-2;
2. for the 3.4 V6, 1-2-3-4-5-6

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Ad

Anonymous

  • 462 Answers
  • Posted on May 31, 2009

SOURCE: need a diagram of the firing order of spark plug wires from coil packs to spark plugs

FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Aug 28, 2009

SOURCE: firing diagram for a 87 olds delta 88 3.8

1987 Oldsmobile Delta 88
3.8 liter V-6 VIN "3" Identifying Ignition Types I and II


119d8a7.gif
On Type II coil packs, the coils can be replaced separately and the ignition wires are all on the same side of the coil pack.

With Type I Ignition

c6cc640.gif
With Type II Ignition

7722088.gif

Anonymous

  • 819 Answers
  • Posted on Apr 17, 2010

SOURCE: 94 gmc sonoma 4.3l vortec new coil, plugs, wires

if you have access to a scan tool, hook it up and look at your live data. check for crankshaft and camshaft sensor reference. if one of these (more specifically crank) if malfunctioning, the ignition and injection will not function.

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Sep 02, 2010

SOURCE: what is the firing order for the wires for a 94

1994 Mercury Cougar/XR7 4.6 liter SOHC V-8 VIN "W"

50023cd.gif


Hope helps (remember rated and comment this).

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to replace ignition coil on 93 sunbird?

you have to remove the intake tube and then it should expose the ignition system on the drives side of the cylinder head... or... follow the spark plug wires...
1helpful
1answer

94 pontiac 2.0ltr sunbird LE IS MISSING LACKS POWER STALLS ITS HAD TUNE RSENTLY

Run fault codes . . Replace no 2 spark plug lead or no2 coil pack.
2helpful
1answer

I have a 94 pontiac 2.0 engine it runs rough when I pull #2 and or #3 plug wires motor runs the same as if I didn't, and when I cross the two still runs the same, but when I rev it up, it runs...

It is possible, but do not forget the injectors. Without fuel you can cross wires and there is no fuel to ignite. Its possible that the coil pack could be bench checked. Depends on testing equipment at store you go to.
0helpful
1answer

Configure spark plugs wire

The Sunbird came with 2 different engines, here are the diagrams for both. Just match the colors from cylinder to ignition coils.

emissionwiz_111.gif


emissionwiz_112.gif
0helpful
1answer

No spark at the plugs replaced ignition pack but no results thisis a 1992 pontiac sunbird 2.0l se

electric ignition module is bad, or maybe the safety shutdown relay, also check to see if the timing belt has snapped, it happened to me, lol replaced plugs, wires, coil, ignition module, and turned out to be the timing belt had snapped causing the safety shutdown relay to shut off power to the coil and fuel pump, good luck :)
0helpful
1answer

Changed plugs and wires on a 94 ford explorer and now it 's not tunning right. need a diagram. please.

FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1991-94 2.9L and 3.0L Engines Firing order: 1-4-2-5-3-6 Distributor rotation: Clockwise 85552008.gif
Fig. 2: 2.3L, 2.5L Engines Firing order: 1-3-4-2 Distributorless ignition 85552010.gif
Fig. 3: 1995-99 3.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition 89682g23.gif
Fig. 4: 4.0L Engines Firing order: 1-4-2-5-3-6 Distributorless ignition 85552009.gif
Fig. 5: 1996-99 5.0L Engines Firing order: 1-3-7-2-6-5-4-8 Distributorless ignition 89682g24.gif
prev.gif next.gif
0helpful
1answer

What is the spark plug wire order for a Pontiac Sunbird 94?

1-2-3-4 clockwise rotation for the 4 banger. 6 cyl's 1-2-3-4-5-6 (one is above 2, 3 above 4 ect from left to right.
0helpful
1answer

Replaced fuel filter - now there's no spark to the plugs.

CHECK ELECTRICAL WIRES TO THE IGNITION COIL AND MODULE.IF OKAY CHECK IGNITION MODULE FUSE.
0helpful
1answer

Spark plug wiring pattern for 94 sunbird

Hi,

Depends on what engine is there inside.
1. for the 2.0 4 cylinders, 1-3-4-2;
2. for the 3.4 V6, 1-2-3-4-5-6

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.
Not finding what you are looking for?

267 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...