Question about 2009 Ford Flex

2 Answers

How do you determine the security access code?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Look just behind and above the emergency brake. There is a sticker there with the 5 digit keyless entry code.

Posted on Jun 04, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 456 Answers

Hi.
if the access code is not included as part of the paperwork/owners manuals with the car, then i am afraid you will have to contact the dealership. they may well charge for suppling the code

Posted on Apr 03, 2011

  • Sand Piper
    Sand Piper Apr 10, 2011

    Paul is correct. One way to get the code is of the dealer recorded it on the documents from the initial service check out (which should have happened). The other way is to take it to the dealer and have them hook up their computer which uses a software program called IDS to retrieve the keyless entry code. It will take approx. 5-10 minutes. Allow an hour or two for scheduling and expect to be charged 1/2 hour. I would call my salesperson and ask them why it wasn't given when the vehicle was purchased (assuming you bought at dealer). They should supply you with the code for free, it's good customer relations. Good luck.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the code radio for PANASONIC CQ-JC179AA PART NO EV45 66ARO B SERIAL NO R31017


this site does not have radio security codes well because they are secure. You can buy access at this site for a small fee. www.radio-codes.com

Sep 22, 2016 | 2002 Ford Escape

2 Answers

I want to know code for my fms radio of ford falcon 2000 Model no :FCT026A1-A Serialno:13499590 Please help me out


We do not have these security codes because well they are secure. You can purchase access at this site for a small fee. www.radio-codes.com

Sep 01, 2016 | Ford Falcon Cars & Trucks

1 Answer

Radio code


Sorry we do not have access to radio security codes, if you could just get them free from the net the word security would be worthless. Please contact your local dealer.

Jun 14, 2013 | Cars & Trucks

2 Answers

Security code 2010 acura tl


You need to contact the dealer.

Jun 11, 2013 | Cars & Trucks

1 Answer

How do you replace a turn signal switch on a 1978 Buick regal


follow the steps and fix it. God bless you
Determine what type of taillight bulb you need to purchase. The 1157 is used in all vehicles in which the brake light and turning signal use the same bulb. The 1156 is used when those two lights are not used by the same bulb.

  • 2 Access your taillights through the rear of your vehicle, typically through the trunk. Pickups and many SUV's have an access panel in the bottom of the bed area. Consult your owner's manual if you are unable to determine how to access the taillights.
  • 3 Unscrew the socket to replace the bulb, or simply unscrew the bulb itself.
  • 4 Remove the packaging from around the new taillight bulb. Grasp the replacement bulb with a cotton towel or hankie. The oils on your skin can cause the bulb to blister and burst, drastically shortening its lifespan.
  • 5 Secure the replacement taillight bulb in its proper location and test to ensure it functions properly.


  • 10_18_2012_4_15_29_am.jpg

    Oct 18, 2012 | Cars & Trucks

    2 Answers

    Car shuts off right after starting security light does not come on


    If the security light is not on it might be the fuel pump. check relay and also turn key to on and listen for hum. if security light is on or flashing then the passlock needs bypassed. much cheaper than replacing parts.

    Sep 27, 2012 | 1996 Pontiac Grand Am

    1 Answer

    Require radio code for 22DC279/62.Rn279FY0052468


    Access to the radio security codes is restricted to sites that pay to access the factories data base and the dealers of course. Fixya does not have any access to this info. Sorry

    Feb 11, 2012 | Cars & Trucks

    1 Answer

    2000 jeep grand cherokee laredo showing code p1686, p1687, p1688, geuges go down, all warning lights come on, with time, the geuges comes on, and the warning lights come off, all but the security key...


    Diagnostic Fault Code (DTC) P1686 has a generic description of "No SKIM Bus Nessage Received".
    Diagnostic Fault Code (DTC) P1687 has a generic description of "No Instrument Cluster Bus Message"

    P1688 is either not a valid code for your vehicle, or the manufacturer failed to provide specific information for it.
    Basically, what is going on here is that you have a problem in your computer network communication bus. Or to put it more simply, the "phone line" is down. Your computers in your vehicle are having problems talking to each other.

    "SKIM" stands for Sentury Key Imobilizer Module (AKA security module). The Instrument cluster and the SKIM are not communicating with the Powertrain Control Module (PCM) for sure, and possibly also not communicating with the Body Control Module (BCM). There may also be problems with other modules that share the same data lines.
    This MUST be diagnosed with a scan tool that can access the entire computer network. You must find out which modules can communicate with the scanner and which ones cannot. This is necessary to determine the possible location of the fault.

    Nov 07, 2011 | 1999 Jeep Cherokee

    1 Answer

    Need door lock code for 2001 Explorer


    2 ways to get code.....1- get a scanner to access security module to get code (local dealers can do that)....or 2- tear-apart the left rear quarter panel to access the security module and the number is printed on the label.....once you do that you can change it to your own code as outlined in your owners manual.......GL

    Jul 05, 2009 | 2001 Ford Explorer

    1 Answer

    Check engine light


    Must have a scanner hooked to diagnostic port to access trouble codes to determine failure. The codes are for engine control sensors.

    Mar 31, 2009 | 1995 Buick Riviera

    Not finding what you are looking for?
    2009 Ford Flex Logo

    Related Topics:

    73 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    fordexpert

    Level 3 Expert

    5520 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...