Question about 2000 Dodge Neon

1 Answer

2000 dodge neon cranks but wont start. If i unplug the cam sensor it will run for a second ( with it plugged in there is no spark coming from the coil)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

You just proved that the cam belt has skipped time. That is the procendure to check. Remove the covers and line up the marks and you'll see your problem. while you have the belt off put on a new one as it should'nt skip unless it's worn out.

Posted on Apr 03, 2011

  • Thomas Nov 13, 2011

    Not always true. I came to this site with same issue. After replacing T belt, the car ran for 20 min. When put in geare to back out of garage, car stalled and would not restart. Code P0340. Replaced cam sensor no help. took apart to see timing marks are perfect. I get one flash from noid light with first crank. No spark ever from coil. WTF!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2001 dodge neon cranked without the cam sensor connected. what's wrong with this picture?


Changing the Cam Position Sensor on Dodge Neon ...

? 10:33
https://www.youtube.com/watch?v=ciCPQ0kVAQY
Dec 21, 2012 - Uploaded by VeeTheAmazingGreek
... had to change out the cam position sensor on my 2001 Dodge Neon. ... 1997 Dodge Neon no start, crank sensor problems - Duration: 26:53.

Dodge Neon Questions - It will turn over but has no spark ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusAug 9, 2015 - I did have a neon while ago and image crank sensor was bad ... my 1999dodge neon has no spark it will turn over but not fire i have changed the crank sensorcoil ... I have a 2001 Dodge Neon 2.0 with 140,000 kms on it.

Dodge Neon Questions - 2001 Dodge Neon will turn over ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusJan 7, 2013 - I have a 2001 Dodge Neon 2.0 with 140000 kms o... ... went about a month before this recent problem, fixed that with no problem now this. ... firing. you said you replaced the cam sensor, did you do the crank sensor as well? ... My 1996Dodge Neon won't stay running whenever I take my foot off of the gas.

Starting Issues and Trouble Code Due to Defective Cam ...

repairpal.com > Problems > Dodge > Neon

Feb 05, 2016 | 2001 Dodge Neon

1 Answer

2004 Dodge Neon 2.0 - Got a new battery, turns over but still wont start. Is getting fuel though.


Has it been running since you got the new battery? If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check for fuel injector pulse. If more than one issue, check cam and crank sensor. Check theft/security where applicable.
Don't replace anything unless testing points you in that direction.

Dec 27, 2015 | Dodge Cars & Trucks

1 Answer

The 2000 dodge neon is only getting spark the 2nd and 4th


Could be the coil, or a crank or cam sensor.
The components would need to be tested.

Jun 20, 2013 | 2000 Dodge Neon

2 Answers

My dodge neon shut off and wont start


What year? First check for spark at any of the sparkplugs.If you have spark and fuel pressure then take the mass air flow sensor off and clean the small thin wires inside with a non-chlronated brake cleaner and let it dry for 10-15 minutes then re-install it and see if it will start.

Oct 15, 2012 | Dodge Neon Cars & Trucks

3 Answers

My 2005 dodge neon sxt wont start, no spark, changed cam shaft sensor, coil is good, cant find the crankshaft sensor, also wondered if it could be the timing belt, what do you think?


the crank sensor is on the back side of the engine just above the oil pan there will be two sensors there one is the crank sensor and the other is oil presser sensor. All so check the wires from the crank sensor to the cam sensor. If you think it is the timing belt pull the cover and check it. hope this helps.

May 22, 2012 | 2005 Dodge Neon SXT

1 Answer

2005 dodge neon cranks but wont start


Hello, If it just cranks and not starting at all can be several things to look at. A engine to run needs fuel, spark, compression, air. BUT here is what I would first do, if you check to see if you have spark, and fuel, most likely it could be the crank sensor. If no codes come up on dash. There is so many things it could be. Just take one step at a time. See if your getting fuel, if you smell fuel, like flooded, then its getting fuel, otherwise could be fuel pump not working, If pulling a plug and keep it in plug sleeve and set next to medal screw on block, and have someone turn key, to see if you see spark. If spark then getting spark, Then were back to a couple things.... Crank sensor went out, that will cause to crank and not start, if cam sensor went out, it would still run, but just like ****. Next if still cranks and wont start, could be the timing chain missed a slot, which means could of bent a valve or stuck valve. Dont panic yet, just like I said start with first and always fuel, and also dont forget fuse panel for fuel relay fuse or fuel pump fuse to see if good. Keep me posted as i will try and help you along the way, Mike

Jan 16, 2012 | 1997 Dodge Neon

1 Answer

My 1999 2.4 dodge stratus wont run unless i unplug cam sensor its a new sensor and a new crank sensor


I'm having excatly same problem, found this sequence to ge the car running again..turn off ign, unplug cam position sensor, crank for 2 seconds, connect cam shaft sensor, crank again and it starts like that...

Apr 01, 2011 | 1999 Dodge Stratus

1 Answer

2000 neon cam sensor location?


2000 dodge neon cranks but wont start, but if i unplug the cam sensor it will run for a second

Oct 19, 2009 | 2002 Dodge Neon

2 Answers

97 dodge neon died replaced parts and still no spark HELP.


YOU NEED TO CHECK DARK GREEN/ORANGE WIRE AT IGNITION COIL WHEN CRANKING ENGINE FOR POWER..IF NO POWER,SHUTDOWN RELAY IS NOT BEING ENERGIZED..THIS ENGINE ALSO HAS CAMSHAFT POSITION SENSOR ON END OF CYLINDER HEAD..ENGINE CONTROLLER NEEDS CAM AND CRANK SIGNALS TO ENERGIZE THE SHUTDOWN RELAY..UNPLUG CRANK SENSOR AND CHECK VOLTAGE ON ORANGE WIRE..SHOULD HAVE APPROX 8V..IF NOT..UNPLUG CAM SENSOR AND SEE IF 8V SUPPLY RETURNS..IF NO POWER TRY UNPLUGGING VEHICLE SPEED SENSOR LOCATED IN TRANS HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..IF 8V RETURNS..THE SPEED SENSOR IS SHORTED INTERNALLY..THESE 3 SENSORS SHARE THE SAME 8V SUPPLY CIRCUIT..WITH SPEED SENSOR UNPLUGGED,PLUG CRANK SENSOR BACK IN AND TRY TO START ENGINE..HAVE SEEN THIS SAME PROBLEM AT WORK RECENTLY

Jul 18, 2009 | 1997 Dodge Neon

Not finding what you are looking for?
2000 Dodge Neon Logo

Related Topics:

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...