Question about Pontiac Bonneville

1 Answer

Only starts when it wants to. when the engine turns over and it doesn't start the power widows and door lcks will not work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,187 Answers

The problem may or may not be related to each other. You may have a bad starting motor or relay. The chance that the issue may be related if it is a wiring issue. Some of the insulator or terminals may have gone bad and may be grounded or gone loose. Inspecting and rewiring needs to trace the wires of each of the components and check for the said physical damages. This is a tedious and long process.

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot engage to drive after starting. Widows do not work either.


insanecivic is correct you need check your fusses if the fusses it is ok. en the column under the dashboard you have a solenoid when don't. has a power lack the column shift.

Apr 10, 2014 | 2003 Ford Escape

2 Answers

Turns over but won't start


I would start checking fuses for power. It could be a battery cable issue or something in the fuse box. The dash lights would not be powered thru the key switch, but the other stuff would be. Provided the key switch is getting power for accessories.

Feb 23, 2014 | Dodge Cars & Trucks

1 Answer

2004 Audi Allroad Power window problem


Possibly a faulty driver door switch. There is a function tied to switch allowing driver to open or close all windows through door switch.

Dec 27, 2012 | 2004 Audi allroad

1 Answer

Mk4 gti vr6 has power but doesn't start, runs with pop start


Could be a number of things but may want to begin by checking wiring to starter, battery, or even the ignition switch. These components may not turn your engine light on.

Jun 17, 2017 | 2003 Volkswagen GTI

1 Answer

Power widows work/don't work


You can check the harness connection by the door hinge going into the pillar.

Oct 30, 2012 | Isuzu Cars & Trucks

1 Answer

88 s10 2.5 is getting spark and fuel but will not start with key switch


so it starts if you pop start it?if the engine turns over but doesn't start then its a bad ignition switch if it does not crank over see if you have power going to the small wire on the solenoid if no check the safety switch and wires at the switch if there is power to the small wire but doesn't turn over then the starter is bad

Aug 31, 2012 | Chevrolet S 10 Cars & Trucks

3 Answers

Lose tried to steal my 20005 buick rainer .iignition is missing took off plastic cover .can turn ignition to start but scurty light is on won,t start .there is no chip in key what can i do to start it?


Your vehicle is equipped with the Passlock theft-deterrent system. Passlock® is a passive theft-deterrent system that enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the ignition lock cylinder is tampered with, the fuel system is disabled and the vehicle will not start.

During normal operation, the security light will turn off approximately five seconds after the key is turned to RUN.
- If the engine stalls and the security light flashes, wait about 10 minutes until the light stops flashing before trying to restart the engine. Remember to release the key from START as soon as the engine starts.
- If the engine does not start after three tries, the vehicle needs service.
- If the engine is running and the security light comes on, you will be able to restart the engine if you turn the engine off. However, your Passlock® system is not working properly and must be serviced by your dealer. Your vehicle is not protected by Passlock® at this time. You may also want to check the fuse. See Fuses and Circuit Breakers on page 5-93 in the Owners Manual.

Testing the Alarm
The alarm can be tested by following these steps:
1. From inside the vehicle, lower the driver's window and open the driver's door.
2. Activate the system by locking the doors with the power door lock switch while the door is open, or with the remote keyless entry transmitter.
3. Get out of the vehicle, close the door and wait for the security light to go out.
4. Then reach in through the window, unlock the door with the manual door lock and open the door. This should set off the alarm.

When the alarm is set the power door unlock switch is not operational. If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown.

Keep us updated.

Sep 12, 2011 | Buick Rainier Cars & Trucks

2 Answers

Where is the fuse for the door locks on a 1996 chevy 1500 series


For 1996 Chevrolet 1500, the fuse block door access is on the drivers side edge of the instrument panel. Pull off the cover to cover to access the fuse block. Check the position 13 (Power Amp, Cigarette Lighter, Door lock Relay, Power Lumbar Seat) and A position (Power Door lock, Six-way Power Seat, Keyless Entry Module).

Other details can find in the 1996 Chevrolet 1500 - Owners Manual

Hope this help (remember rated this help).

Mar 19, 2010 | 1996 Chevrolet C1500

1 Answer

My engine light came on


give the stater motor a whack with a hammer if not that the its your battery its dead just because your lights widows and all work bmw cars are funny that way they require alot of power on initial start up

Dec 15, 2009 | 1997 BMW 328

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...