Peugeot 206 brake lights stay on all the time even though i disconnect the switch on the brake pedal.

The most common thing without checking the system is a short in your brake light switch Good Luck Mike L.

Check the Brake light switch attached to the Brake Pedal assembly.

above the panel under the dash on a support bracket above the brake pedal ,twist and turn to remove

I am not sure on the peugeot, but most of them are in line with the brake pedal. Follow the pedal up towards the pivot point, you should find a small switch with wire attached to it. That should be the switch.
_____________
hid conversion kits

You need to test the "BOO" switch that controls the brake lights, it is located above the brake pedal and the brake pedal arm opens and closes the switch. It of course should be an open circuit with 12 volts at one contact without the application of the brake pedal and a closed circuit with the pedal pressed down (12 volts in and out), Adjust or replace the switch as the testing dictates.

hi the first thing you need to check is the fuse in the fuse box if this is ok then the chances are the brake light switch needs replacing or it may have come loos what you need to do is get down on your knees so you can get a close look at the brake pedal then if you follow the brake pedal all the way to the top just before it goes through the bulk head into the engine you will then see a switch attatched to the very top of the brake pedal it will have 2 or 3 wires coming from it so check if this is fitted correctly also you could remove it and press the switch by hand and then see if the brake lights work that way.

If they do then try fitting it again and you may be able to adjust it slightly so check this if on the other hand it still dont work then you need to get it replaced.

Let me know how you get on or if you need further assistance ok

top of brake pedal bracket.

Hi,

Sounds like your brakelight switch (mounted up on the brake pedal) could possibly have a short somewhere, or bad contact.

Hi, there is a switch at the brake pedal , look for it behind the brake pedal bar ,if this switch moves it gets missalingned making the light to stay on , check that ,it can also be that the switch is defective.......C1

the timing is way off need to adjust the timing