Question about 2000 Ford Expedition

1 Answer

Try to start my 2000 expedition turn the key to the on position everything comes on radio lights ect and go to the start posistion to turn the motor over and nothing no click just a really loud beeping

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

There's also a security light in the speedomter housing. of this light is on and the light flashes as the beeping sounds the key is'nt being reconized by the computer, This car is well known for started failure so the wire also breaks off the started so look at the wires on the starter to see that they are connected anfd theat they have power the big cable shouls be hot all the time ( from the battery) and the little wire should come hot as the key is turned to start. if it doesn't come hot as the key is turned jump puwer from the battery wire to the small wire and the starter shsould crank ( it can make a spark so be careful to potect yopur self and your eyes from dirt and sparks. If the starter works and the small wire is'nt coming hot as the key is turned the car might not be in park good or may start in neutral. if it does the neural start switch might be bad or the gearshift linkage is loose andf the car is'nt all the way in park.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Ford Expedition el limited sometimes starts great but most times does nothing when try to start everything still comes on and has power but does not turn overrun less I keep turning keys off and back...


Could be the key switch, or the starter, or another component.
You would need to check for power at the starter terminals when the key is in the start position.

Mar 25, 2015 | 2008 Ford Expedition Limited

1 Answer

My 2004 expedition will start it just takes 2-3 time turning the key, holding each time for a second or two?


try this turn key on but not to start position a couple times on third time try to start. if starts up your fuel pressure is droping off after shut down . ie fuel pressure regulater , leaking injector, fuel pump check valve ect

Aug 03, 2014 | Cars & Trucks

1 Answer

Cant get my car started, turn the key to the on position and no dash lights come on. try to start it and nothing happens. what can this be? this is on a 2000 oldsmobile intrigue


turn key and no radio or lights? Battery.
If everything comes on when key turned but does not start could be a lot of things. Need more info.

Oct 17, 2013 | Cars & Trucks

1 Answer

My 2000 Toyota tundra will not start, i replaced fuse's and got to the starter i was able to get the starter to turn and my readings read it was fine, i clean my battery post's and cables but still...


make sure your getting power to wire on starter as you turn the key to start position if not ignition switch could be faulty if you are getting power to starter coud be your starting motor

Sep 16, 2011 | Toyota Pickup Cars & Trucks

1 Answer

Car won't crank up when key is turned I hear a clicking sound I dont think its the battery because the radio, lights, and everything else works tried to boost it didn't work


Try this. Turn on the head lights and have someone watch them while you try to start the Ford. If the lights go dim or out then it's time to replace your battery. The battery does not have enough power to start the motor but is fine with everything else.
Good luck and thanks for your question and I hope my suggestions help. Don't forget to rate me.
burdfrenzy
Visit My eBay Store!
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Jan 07, 2011 | 2001 Ford Expedition

1 Answer

2000 pontiac montana doesn't start and security light appears on dashboard


Very common problem on these cars. Do you have another key you can use? Try it. If not take the key ou have been using and turn ket to the on posistion. Leave it there on for ten to fifteen minutes. The computer will relearn the chip code on key. When light stops blinking you know it is done. Turn key to off wait ten to fifteen seconds and turn key to on position, Security light may blink once or twice then it should stop.. Try to start vehicle. It should start. If it doesn't then you may need whats called a new passlock and possibly key reprogramming. Which can only be done at the dealer most of the time. Hope car starts with the first procedure. Let me know if it works.

Oct 26, 2010 | 2000 Pontiac Montana

1 Answer

At first when i turned the key to the on position the lights on the dash would come on after about a second now the lights do not come on causing the truck not to start when i turn the key to start the...


Check battery connections as well as motor to body ground battery to motor and body ground condition, bad ground can cause all kinds of problems, Also have your battery checked

Jul 14, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

My tundra wont start but all the lights and radio


That might be a possibility. Asssuming when you say it wont start you mean it won't crank over. First check battery voltage at the battery with a dvm when you turn the key to the start position. Then check the voltage at the starter when you turn the key to the start position. If both readings are the same and you must have a reading of at least 12dcv. Try turning the ignition key to the on position( not the start) and jump the positive voltage from the starter to the solenoid terminal. The starter should crank over if the proper voltage is present.If the starter just clicks or just attemps to start. yes, you need to replace your starter

Mar 25, 2010 | 2000 Toyota Tundra

1 Answer

Lights are back words .the hi is lo and the lo is hi. also blue light is on when switch is off and daylime runing lights dont come on unless i have lights switch on, and switch to low beam. concluded that...


The security in the car is what they call "Passlock" and the security is built into the instrument cluster and the key must be relearned, to do this you will have to turn the key to the run posistion without starting it for about 10-15 minutes you may want to put a battery charger on the car so it doesnt kill the battery, and make sure that all the accesories are turned off for ex. the radio, blower motor ect. and make sure the door is kept close. After the time is up turn the key off and then start the car and that should do it.

Jul 07, 2009 | 2004 Pontiac Sunfire

2 Answers

WEIRD PROBLEM


On my girlfriends sl1 the engine would not turn over at all and I took the starter off and it was fried! I replaced it and it started right away, but I never had a problem with the lights not coming on.

Oct 08, 2008 | 2000 Saturn SL

Not finding what you are looking for?
2000 Ford Expedition Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5636 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...