Question about Dodge Ram 2500

1 Answer

How do i line up the marks - Ram 2500 Dodge Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 693 Answers

If your talking about timming marks. you have to remove the belt and place the dot stamp on the crank at 12 o clock and camshaft dile pin to 6 o clockthen replace timing belt or chain, Good luck to you.

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi can u pls assist me with the timing marks for this car chevy aveo 1.5 engine 8 valve 2006 model hatch back pls urgently & also head bolts torque setting


Your timing marks should be on the belt. There are two single lines and one double line across the surface of the belt. Each of the single lines line up with the cam shaft and the balance shaft drive gears. The double line lines up with the crank gear. If I remember right, there is a small mark on the oil pump housing that the crank mark lines up with and the cam mark is straight up and there are 2 other marks on the cam gear that line up with the head.

Jun 05, 2015 | 2006 Chevrolet Aveo

2 Answers

Timing belt replacement. what are the mark settings on the pulleys?


If you dont know the marks on an engine when replacing the timing belt. There are usually marks on the pulleys and housings to line up. Put the engine on top dead centre TDC from the crankshaft marks before looking for the other marks. If you cant find them Use white out to place your own marks on the pulleys and housings before removing the old belt . To be sure nothing gets out of line mark any pulley that has teeth. It can be useful to take a few digital photos . When fitting the new belt make sure your marks line up again.

Mar 03, 2011 | 1992 Geo Storm

2 Answers

Hi! What are the correct timing marks for a 1.8 suzuki esteem engine. I needed for change the timing chain. Thanks


if you take off the upper belt cover and line up the top dead center timing mark the cam mark will be right on or off 180 degrees. Line up the dot on the cam with the arrow by rotating the crankshaft around till both the cam mark and the crank TDC mark line up. Now when you take off the lower cover all the marks will line up for the crank. They are usually pretty obvious, but if your are not sure at this point you can always paint your own. Just make sure when you slide the new belt on , all the timing marks line up.

Dec 28, 2010 | 2001 Suzuki Esteem

1 Answer

How do you synchronize timing belts when installing them?


find the mark on the flywheel. it will be 3 marks close together ,( it will NOT be the ignition timing mark) line the middle mark to the pointer on the flywheel. cover. (top of engine, to the rear) now one cam pulley mark will be at 12 o clock, and the other at 6 o clock, it doesnt matter which. once the belt is on and the marks lined up, then tension the belts. once they are on, you can put the front crank pulley on and it should run. the cam pulleys may want tp turn one way or the other when lining up the marks, but they must end up, tensioned, with the marks lined up.

Dec 11, 2010 | 1991 Subaru Loyale

2 Answers

Okay. I got the old timing belt out and found that all the teeth were gone where it goes around the crankshaft gear. I put a new timing belt on and lined up the marks, but when I rotate the engine several...


the marks on the belt itself will not line up with gear marks after rotating engine as long as engine marks line up you are fine however these are know to bend valves

Aug 21, 2010 | 1991 Nissan Pathfinder

1 Answer

Replacing a timming belt where are the marks suspost to line up


You didn't get the timing marks lined up between the cam and the valves. You are going to have to open it back up and line the marks back up correctly. Make sure you get the Number 1 cylinder lined up to Top Dead Center on the compression stroke and have the valves lined up correctly then line the timing marks up on the timing gears.

Jun 24, 2010 | 1992 Mitsubishi 3000GT

1 Answer

Putting on timing belt .


The crank has got to be at TDC, with the marks lined up, the cams have to be lined up to their marks, then the belt will line up, If it doesn't line up, You will be walking home. If you have the old belt handy and the marks are still visible, compare them to the new belt, make sure they are the same. Pull the pin on the belt tensioner and you should be all set. Hope this helps.

Apr 01, 2010 | 1997 Mercury Villager

1 Answer

Back fires


you have all 7 marks lined up? there are the top two pullys that need to be lined with the top marks on the rear timing covers, and then there are two marks on the bottom of those pullys that need to be lined with the marks on the two bottom pullys, as well as the two side marks on the bottom pullys that need lined on the belt, and then the mark on the crak pully that needs lined up with the mark on the oil pump?

Mar 07, 2010 | 2007 Subaru Impreza WRX STI Limited Sedan

2 Answers

TIMING BELT MARKS DONT MATCH AFTER ENGINE TURNED OVER


dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt marks line up again if your pulley marks line up correctly thats all you have to worry about

May 29, 2009 | 1994 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...