Question about Hyundai Accent

1 Answer

The central locking makes a sound like it wants to lock when the button is pressed, but nothing happens. Everything that normally happens when the button is pressed happens except for the 2 front doors locking. What can i do to fix this problem?????????????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 184 Answers

You will probably need to remove the door panels and spray the lock mechanisms heavily with wd40 or similar.They are common to seize up and do this,also the little spring on the mechanism latch lever rusts and breaks,causing the door not to open at all,only by actuating with some difficulty the lever with a flat bar down past the window.I have seen some of the remote lock actuators seize on doors other than drivers,so that the doors wont lock.lube in behind the rubber bellows that waterproofs the actuator rod. while inside doors.
Hope this helps you or get back to me with your findings.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a problem with the electric lock security system. Under normal conditions if I press the unlock on the key remote, the lights will flash once and the doors unlock. When I press the lock button


if this is a factory lock security system you can contact dealer for instruction sheet to re-program your remote or have them do that for you if vehicle is under warranty. if not you can go online and find the procedure for your make,model and year of vehicle. sounds like the remote's battery is need of replacing or the remote needs to be re-programmed

Feb 03, 2015 | 2008 Nissan Rogue

2 Answers

Got a preowned 2004 318i executive series E46 facelifted two months ago, comes with 2 sets of ignition key with remote on fob. Suddenly, 1 key that can operate the keyless entry will not start the engine....


How
Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button Fig. 2 [2]. Press lock button Fig. 2 [1] briefly 3 times within 10 seconds keeping unlock button [2] depressed. Release unlock button Fig. 2 [2]. Central locking system locks and unlocks rapidly to indicate correct programming. Repeat above procedure if central locking system does not work.
NOTE: A maximum of 4 keys can be programmed. Carry out programming procedure for each key within 30 seconds.

Aug 30, 2010 | 2006 BMW 3 Series

1 Answer

I have a 02 audi a4. When i press the button on my key for the central locking to open he door nothing happens and the battery is fine in it. When i put the key in the drivers door it opens and when i put...


NOTE: If key buttons operated repeatedly while vehicle out of range or batteries replaced and system becomes inoperative, proceed as follows:
Press one of the buttons. Manually lock and unlock driver's door within 30 seconds. System should operate normally after approximately 1 minute.

Jun 22, 2010 | Cars & Trucks

1 Answer

Central locking in my bmw 320 diesel isnt working it wont open the doors but it will start the engine , the spare key is the same so its not the battery of the keys


Providing central locking works when you insert key in lock,try programming keys
Enter car make sure all doors/windows are shut
Switch ignition on and off,remove key
PRESS AND HOLD UNLOCK BUTTON ON KEY
Press lock button on key 3 times whithin 10 seconds and release unlock
Central locking will lock/unlock rapidly to confirm reset
If your key is the type with bmw logo in the middle battery replacement is not possible,as it charges as you drive

Jun 21, 2010 | 2004 BMW 3 Series

1 Answer

Central locking


turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.

Apr 23, 2010 | 2003 Land Rover Freelander

2 Answers

I have BMW 330ci, the central locking does not work. Bmw fixed it in a matter of seconds last time it happened but it is expensive. Can i reset the key fob myself ?


put the key in the ign cyl and turn car on and off, remove key and hold unlock while pressing the lock button 3x,the locks will lock and then unlock if you have a second key do the same thing immediatly following except do not cycle key in ign just press the buttons int he same sequence

Dec 21, 2009 | 2001 BMW 330

7 Answers

2006 bmw 325i remote only unlocks driverside door. will not unlock all doors when you lock it from the inside. have to use key in remote to open door. also central button to unlock doors is inop


fuse 56 and 57 control central locking,the issue is caused by surges typically in the front door lock actuators, normally at a dealer they would replace fuse 56 and 57 with a 20a mini fuse and if still occuring repl the door lock(s) that dont work or typically both front, first replace fuse 56 and 57 with 20a fuses as were too small from factory and than operate ten to 15 times, if it doesnt work at first dont panic,let the car go to sleep which takes about 16 min and than try again this problem has nothing to do with the key fob or the lock unlock button inside,also the fuses are located behind the glove box just rere the access panel and they are found at lower left section

Jul 23, 2009 | 2006 BMW 3 Series

2 Answers

I have a 1998 Audi A4. My central lock stopped working


The humming is the central lock vacuum pump running..You either have a leak in one of the lines, or one of the hoses has popped off

Jun 18, 2009 | 1996 Audi A4

1 Answer

Passenger door not opening with central locking


1st wind the glass down and turn the key in the driver door twice in clockwise direction to lock, at the sound of the second click try try opening the door thru the window (passenger) manually. you will need to pull the knob twice before it opens. you can get all the passenger doors open this way until you decide to change central lock system. To activate the remote; insert the key into driver door while pressing the lock or unlock button on the remote for at least five-ten seconds which should get it functioning normally again. hope this helps. it worked on mine.

Aug 07, 2008 | 2002 Audi A6

3 Answers

Mercedes S320 central lock


if you hav a remote control key &yr car wont respond . change key batrrey &contact dealer if still dont work for software

Jul 13, 2008 | 1994 Mercedes-Benz S-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...