Question about Chevrolet Lumina

3 Answers

Were is the camshaft position sensor on a chevy lumina 1994 3.1

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

It is in the inner side of the block is hard to reach you need to raise the front of the car as high as possible and get under to reach some times comes handy to take the wheel off and reach thru the gap near the cv joint

Posted on Apr 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 400 Answers

Directly behind the power steering pump at the top right (passenger side) of the engine, in the block next to the intake manifold.

Posted on Apr 03, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 7,710 Answers

Please let me know if you have more questions, and thanks for using FixYa.

Were is the camshaft position - jturcotte_1433.gif

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3.1 1993 chevy lumina cam sensor position? And how to take out


  • SERVICE AND REPAIR

Camshaft Sensor Follow this URL for picture:_
http://alldatapro.com/alldata/PRO~V416324719~C30660~R0~OB0~P3R0H~N/0/41746052/42417623/42417638/42422763/34853741/34857029/34857030/101366976/14461280/42437587/41882479

REMOVE OR DISCONNECT
  • Negative battery.
  • Serpentine drive belt and secondary air injection drive belt.
  • Power steering pump.
  • Electrical connector.
  • Bolt (1). Refer to Figure.
  • Camshaft sensor.
INSTALL OR CONNECT
  • Camshaft sensor.
  • Bolt (1) torque to 10 Nm (8 ft lb).
  • Electrical connector.
  • Power steering pump.
  • Serpentine drive belt and secondary air injection drive be!t.
  • Negative battery cable.

May 04, 2015 | 1993 Chevrolet Lumina

1 Answer

Code Po341 What is it on a 1996 Chevy Lumina


P0341 is: camshaft position sensor A circuit range/performance (bank1 or single sensor)

Sep 19, 2013 | 1995 Chevrolet Lumina

1 Answer

Chevy lumina euro 1993 camshaft position sensor


Local library should have the info your looking for.

Mar 04, 2013 | 1998 Chevrolet K1500

2 Answers

Camshaft position sensor on chevy lumina 1994 3.1


it is on the rear of the engine just below the middle spark plug just above the transmission oil pan. If your car is front wheel drive. If it rear wheel drive it will be on the passanger side same location.

Apr 03, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

How do you check and change a camshaft position


The camshaft sensor wouldn't explain the clattering noise. But a timing chain would explain both. Clattering from a loose chain and the camshaft sensor code from when the chain broke and the camshafts stopped turning.

Aug 02, 2010 | 2000 Chevrolet Tracker

1 Answer

Where is the camshaft located at on a 1998 Chevy Lumina


Its just above the crankshaft in the center of engine just below the lifters. See a GM dealer parts dept. for pictures af cams and cam sensors. They might fax you a picture.

Apr 15, 2009 | 1998 Chevrolet Lumina

1 Answer

Firing order and camshaft sensor for a 96 chevy lumina 3.1 v6


Here is a diagram of your motor with the firing order:

704b0d7.gif

Mar 19, 2009 | 1996 Chevrolet Lumina Mini

2 Answers

1994 chevy lumina van. It will start and idle but stalls when gas


Try replacing the throttle position sensor. I had the same problem in my truck. It would start and run for a bit but as soon as you let off of the pedal, it would die. Try it and see if it works.

Mar 18, 2009 | 1994 Chevrolet Lumina APV

1 Answer

Where is the camshaft position sensor located-99 Chevy Lumina 3.1


It's held down by one bolt right above the timing chain cover. It's next to the head that's facing toward the front of the car.

Feb 06, 2009 | 1999 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...