Question about GMC Sierra 2500

1 Answer

What size manual transmission will fit to a 350 5.7 engin?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

You did not say if you are puting this in a car or truck. Assuming you are working with a car I would recommend a "World Class" T-5 Transmission. If you can get your hands on a Ford Mustang unit and have the input shaft changed to the GM type you will have a good strong unit. Check for slack in gears and free play in shafts. If the unit has a lot of miles it is recommended that you have it "refreshed" by a reputable shop. Also I recommend a Steeda or Pro 5.0 shifter with adjustable shift stops set at .030" after it is installed to insulate you from tearing out clutches during those adrenalin shifts. 3.7 quarts of automatic transmission fluid for the fill.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do the engine mounts of a 1991 Isuzu trooper line up to a 350 chevy small block? Mainly can I remove a 1991 trooper engine and swap in a small block 350 chevy crate engine?


no, its not a drop in fit. rice car with usa engine.
but anything can fit, of you have tools and the skills
measure, cut , weld., and cash to buy adapter kits.
engine mist fit more than mounts
it must fit to the transmission.
why not join a real forum on Isusu, we dont have a custom cars section here, "no organization all here, more blog like here , and useless:
one of the many, ever google "isuzu forum'" hark a revelation.
http://www.planetisuzoo.com/

lots more, and many have swap sections, really Ive never seen a real forum not have swaps section, but where you are now.

Oct 26, 2016 | Isuzu Cars & Trucks

1 Answer

1988 Chevy V8 5.7L 350 4bbl . My vin starts with 2GBJG31M9J4 . it is a RV jamboree with the chevy 1 ton heavy duty emission. does anyone know where I can find a vacuum diagram?


Vacuum Diagrams - AutoZone

www.autozone.com/repairinfo/.../repairGuideContent.jsp?page...

AutoZoneGM Chevy Mid-Size Cars 1964-1988 Repair Guide ... Fig. Fig. 4: 1971 V8 enginevacuum hoses ... Fig. Fig. 12: 1976 350 V8 engine-4bbl with EFE and AIR injection systems .... Fig. Fig. 52: 1980 5.7L V8 engine-automatic transmission federal. images for 1988 Chevy V8 5.7L 350 4bbl vacuum ...

Nov 23, 2015 | Cars & Trucks

1 Answer

1969 firebird


I guess my first question would be - what are your plans for the car ?
Totally stock, modified, or race ?
Totally stock would be the most valuable in terms of resale. Modified or race would limit the number and type of possible buyers.
It had a straight 6 cyl 250 - a 350 V8 - or 400 V8 when new. The VIN would tell you want the original engine was. And this was before GM swapped engines between brands. So the V8 engines were Pontiac built. The Pontiac 6 cyl was overhead cam.

Feb 15, 2014 | Cars & Trucks

1 Answer

What manual transmission will fit onto a 70s chevrolet 350 v8?


There are many that fit those...You could find a Muncie M21, M22 or even a really heavy duty version of the Borg Warner cast iron"rock crusher" transmissions (think they were sometimes used on the original "real" Z28 camaro with the 302 engines). There are tons of other units which were modified to fit as well. All those units used to be commonplace but you will need to search a bit to find one now..
Good luck

Apr 19, 2010 | 1983 Chevrolet Monte Carlo

1 Answer

I NEED YEAR & SIZE FOR A CHEVY ENGINE. ID #V1016UKA


it was built in flint michigan on october 16th 1981, and intalled into a c-30 van or c-3500 truck with a 159.5 inch wheelbase. originally had a 2 barrel carb. had about 150 horsepower. 350 cubic inch 5.7 liter. originally had manual transmission.vin code on original vehicle was P LF5.

Apr 05, 2010 | 1988 Chevrolet C1500

3 Answers

I need a layout of where the vacum hoses on a 350 chevy go on a 84 full size blazer where can i get this?


fb818de.gif
1984 350 (5.7L) V8 engine—4bbl federal and high altitude with automatic transmission


Let me know a few specifics for an EXACT diagram for you....transmission, carb size, things like that.....you can also email me hydro83282@gamil.com and I can send you more. FREE--NO CHARGE!!!

Oct 17, 2009 | 1978 Chevrolet C1500

3 Answers

Will a stock transmission fit on a 305 small block engine?


Not a stock 1991 GMC Sonoma transmission. They're made to fit a V6, not a V8.
(With a 4.3Liter V6 engine)

Sep 01, 2009 | 1991 GMC Sonoma

2 Answers

Need to now what size this block is


the engine block itself will have the motor size on it

Jun 14, 2009 | 1988 Chevrolet K2500

4 Answers

What engine of other cars could fit in Chevy caprice 82-85,


almost every rear drive drive full size used the 305 V8, so u can get an engine from a Buick La sabre, Pontiac bonneville and firebird, also Oldsmobile 88, and don't forget Camaro. any 305 chevy V8 will bolt in, also the 350 V8 will bolt in, this is a much better choice..

May 19, 2009 | 1985 Chevrolet Caprice

1 Answer

What size engine and transmission do i need for 24inch rims?


best bang for your buck 350 cid with a turbo 350 or 700r4 ... the 350 engine can be stroked out to 383 using the internals:pistons and crank from a 400 in big block... but just stroking a 350 on a hot tranny with low gears to drive those big wheels is important get a 4;11 low gear ratio you ll be able to drag that monster.

May 08, 2009 | 1987 Oldsmobile Cutlass Salon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...