Question about 1985 Dodge Conquest

1 Answer

88 dodge conquest tsi no start has spark has fuel to the injectors but i dont think its pulsating the injectors fuel up to the injectors but not spitting fuel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 638 Answers

You can disconnect 1 of the wiring connectors to the fuel injectors one at a time, and hook up a noid light into the wiring connector, and then turn ignition on, and watch for the noid light to flicker, this will show you that there is electricity going to the fuel injector, if this all checks out, then you can also use a mechanics stethoscope , and place the probe onto each fuel injector with the wiring connected, and then crank the engine, to see if you hear a clicking noise coming from the injectors, the injector that has liitle or no sound is the bad one.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1987 chrysler conquest tsi and fuel pump only runs when key is on start not on run but pump fuel lines not hook only power wires to pump is this how it works?


What does it do with the lines hooked up ? Most fuel injected vehicles need an RPM signal to let the computer know the engine is running to let power continue to the pump .

Feb 04, 2016 | Chrysler Cars & Trucks

2 Answers

Why i dont have injector pulse on 3 injectors?


YOU NEED EXPERT TEST EQUIPTMENT,,YOU NEED DEALER TECK HELP. TAKE IT OR TOW IT TO A DODGE DEALER

Jan 21, 2016 | 1999 Plymouth Breeze

1 Answer

95 olds 88 3.8l wont start i have fuel and spark......i had loss of power on the way home from work and it died in my drive way and now wont restart it does have a new crank sensor and fuel pump


It may be time for a pro to look at it. You dont want to guess wrong on a PCM. Are you sure you have Injector pulse? One side of the fuel injectors should have power and the pcm grounds them to make them open. If the engine runs on carb cleaner its not getting fuel.

Jun 02, 2012 | 1995 Oldsmobile 88

1 Answer

88 dodge conquest tsi no start has spark and has fuel coming out of the injectors


,Use caburator cleaner and spray down the throttle body and put the air duct back on if this start up and then dies your fuel pump is the issue, If you dont have spark and want to test for spark take the lead spark wire from the ignition coil let it hang 1/4 from body ground and have some one crank it if you dont have spark replace the sensor in the distributor.(optic sensor its hall effect). if you have spark and fuel. note the postion of the distributor and move it foward. if it wants to start and cant check for a slipped timing belt,by the way Plymoth made the conquest TSI

Feb 26, 2012 | Chrysler Conquest Cars & Trucks

2 Answers

2000 mitsubishi diamante has spark has fuel up to the injectors and power but wont start.


At injector's, need to check if you have ground pulsation, to check, connect test light on pos (+) battery terminal, now your set to check ground, at injector harness, probe wire's, while some one cranks engine, look for pulsation, if you don't have pulsation, it will need a computer, injector pulsation is control by the computer, if no pulsation, then no fuel can get into cylinder.

Sep 09, 2010 | 2000 Mitsubishi Diamante

1 Answer

Have a 88 conquest TSI. Car idles rough when started, and roughness is noticable up to 2500 rpms when trying to maintain a certain speed. If accelerating, it's not noticable, and if the rpms are above...


i am having the same problem i think its due to ground problem or iac vaulve, look to see if the ground to the engine is right and see if the iac vaulve is good, also ur map sensor might have to much volt, and ur tps as well. good look friend God bless.

Aug 10, 2010 | 1987 Chrysler Conquest

1 Answer

88 chev,350, stick,2wd, 3500, gas flows to


E.C.M control injector pulsation, with key on check for voltage at injector harness, then reverse test light at battery and check for ground at the other wire at injector harness, crank engine ground should have pulsation if none bad E.C.M,good luck,hope this was very helpful.

May 14, 2010 | 1988 Chevrolet C1500

1 Answer

Knock sensor in 2002 xterra se/sc


ok if it is getting spark at spark plugs that rules out ignition, let go to fuel, needs to check fuel pressure and also injector pulsation, if no pulsation fuel will not get into cylinder's, also a knock sensor will not keep an engine from starting, it controls ignition timing once engine is running.

Jan 05, 2010 | 2002 Nissan Xterra

2 Answers

My 1987 chrysler conquest tsi floods the engine and won't start


your best solution wont work because it is an 88 they can only scan '96 and newer when OBD II came out so know what you are talking about before you post
those cars are known for fuelinjection probs. your best bet is to first get your self a fuel pressure regulator and Gauge to determin how much fuel you are pushung and get it tuned up by some one who knows what they are doing because tuning will make or break a turbo car

Nov 28, 2008 | 1988 Mitsubishi Starion

Not finding what you are looking for?
Cars & Trucks Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...