Question about 2007 Chrysler Sebring Sedan

Open Question

My sebring 2007 a / c does not work when the current reaches the compressor is cut and check the cable is not broken and the code p0073 what brand I will have something to do

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I was trying change the tail light on a 2007 chyler sebring and the fell in how do i get it out without cutting in where the license plate is?

If you must get it out , try a long flexible magnet. If u leave it ther it wont cause damage. Just install another one.

Dec 17, 2016 | 2007 Chrysler Sebring Sedan

1 Answer

Cruise control broken off stearing wheel on crysler sebring 2007

if you are talking about the lever, this requires removal of the steering wheel. Check ebay for part and it should tell you all cars it will fit. If you are not ok with removing air bag, steering wheel, get the part and bring it to a mechanic.

Mar 15, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

P0073 CODE

ambiant air temp sensor is probaly broken or disconected it should be in the front bumper small black plastic with 2 wiers looks like a pencil tip

Feb 14, 2014 | 2006 Chrysler 300

1 Answer

My 2010 Chrysler Sebring convertible - after using the car for 18 months only, on a flat road the cruise control works very well. But even the slighteset uphill gradient, the speed drops by 8 kms &...

If the cruise control actuator is vacuum controled I would be looking at a problem with the rubber hose.--cracxked , broken or hard and not sealing.. Cruise controls normally work with a less then 150rpm variation and respond when that setting is reached. Check that the cable is correctly adjusted of if cpu controlled that there is not a fault code reading

Feb 27, 2013 | 2010 Chrysler Sebring Convertible

1 Answer

We have a 2007 grand caravan a/c problem. yes it does front and rear heat and air. One day the air worked the next it didn't. Had the coolant checked (freon) it's fine checked the fuses and...

Check the cut out switches in the A/C system.
Id take wires and apply 12 vdc to the compressor terminals to see if compressor clutch engages.
If it doesn't then you may need new clutch kit.
If it does, then you need to find the switch(s) that allow voltage to reach compressor and test them.

Hope this helps...

Jul 23, 2011 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

I have a 2007 sebring stuck in park.What's wrong?

Gear shift selector cable could be broken, put the car on a lift and check the linkage for binding or any broken parts.

May 25, 2010 | 2004 Chrysler Sebring

2 Answers

We have a chrysler sebring 2007-we can get it started but will not move from park- we have trouble shoot from the book

This may seem elementary, but... The shift lock is released when the service brakes are applied, check to see if the brake lights work. If they do not the brake light switch or wiring may be at fault. If the do work, the shifter interlock mechanism may be broken. Good luck.

Jul 18, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides