Question about Chevrolet Camaro

1 Answer

Need wiring diagram for 97 camaro turn signals. just replaced left front socket and bulbs for front and rear. right blinker still doesn't work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,172 Answers

Hi, diagram resolution on FixYa is poor, but I can email if you send your address.

need wiring diagram for 97 - jturcotte_1429.gif

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My left front blinker flashes quickly. - The left


Check for power at the socket. If there is no power I would suspect the flasher relay wich supplies power to each bulb individually after it gets the right or left signal from the switch.

Sep 08, 2013 | 2007 Toyota 4Runner

2 Answers

My left blinker doesnt flash on my 97 mazda miata


replace the left blinker relay, located in the fuse panel.

Dec 21, 2012 | Cars & Trucks

1 Answer

2005 Dodge Magnum RT. Left turn signal in rear, flashes fast rear bulb replaced but blinker still blinks fast occassionally and rear turn signal light socket has no voltage when this happens. Where is the...


When its blinking fast look at both front and rear to verify which bulb isnt flashing. If the right works OK, then the flasher is OK. The flasher is INSIDE the front control module/integrated power module. If you cant find the problem, you may need a dealer to check it.

Aug 29, 2011 | 2005 Dodge Magnum

1 Answer

Turn signals go out in front


moister or metal is shorting it out. Check all wires to see if they are grounding out and use dielectrical grease in the bulbs sockets to keep moister away from the contacts

Jan 24, 2010 | 2001 Chevrolet Camaro

2 Answers

89 Toyota Pickup right turn signal doesnt work just buzzes


check all bulbs,inspect sockets for corrosion,rust ,or sighns of overload.follow wires and check connectors if all good ,replace the flasher ,,if that doesnt fix it ,the blinker switch in the steering coulmn would be next

Sep 22, 2009 | 1990 Toyota Pickup

3 Answers

98 Subaru Legacy, right blinker comes on steady,can't turn it off. Left blinker works fine. right blinker will work sometimes and then it goes steday again. Can't be the flasher as I have removed it and...


Pull that bulb out and look closely at it, it'll probably have one of the filaments(Tungsten wires) broken and crossed over to the other one causing a short to power and/or the bottom of the bulb has had the 2 lead contacts melt together. In either case the bulb will need to be replaced. If this doesn't fix the problem please let me know so I can look into it further.

Jun 01, 2009 | 1998 Subaru Forester

3 Answers

Left turn signal blinks fast in rear and regular in front


Very simple the bulb is out. When the blinker does that its telling you the bulb needs to be replaced

May 17, 2009 | 2001 Chevrolet Corvette

1 Answer

LEFT BLINKER RUNNING AT HIGH BLINK RATE


Make sure bulb replaced is the required 2 way or 1 way. If you're sure you put in the right bulb type (1 way or 2 way) 6 or 12 volt.. bulb model marked on side for replacement (Check carefully). Assuming its the right bulb type and still blinks fast, you will have to replace the socket. Sockets do get corroded and worn. Disconnect the battery, cut positive then cut negative. Wire up new socket same way using wire connectors. Tape up connections after.
Should then work.
Make sure before you do this you have the right bulbs in all sockets (front and rear) and that all lights work 1st. One failing light front rear same side can cause this problem.
Go to a scapper to get a socket.. just cut it off a wreck... take a couple of them. There cheap.
Good luck

Mar 24, 2009 | 2003 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...