Question about Ford Explorer

1 Answer

Driver's seat will not heat - Explorer Ford Cars & Trucks

Posted by on

  • Anonymous Apr 03, 2011

    Read what you said
    No info

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Dear Kevin, check fuses each seat has it,s own fuse. Use a multi meter and check for continuity in both seat and back cushions. Have repaired several hundred lower grids, usually the grid wire breaks at the outer edge from sliding in and out of the seat. If both grids are good try switching l/s switch for r/s. Grids can be repaired by cutting out burnt wire and resoldering ends back together again. This is very thin 30 to 35 guage aluminuim wire about 6 strands. Use electrical solder and a soldering gun. Soldering is the easy part, removing the seat material and locating the grid, some models have grids glued to seat foam, others are sewn into seat covers. This is a nice Sat. job. Kirk fe6fc

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seat heater comes on by itself in 2004 yukon denali


Heated Seat Components
The heated seat system consists of the following components:
• Driver and passenger heated seat switches
• Driver and passenger seat back heater elements
• Driver and passenger seat cushion heater elements
• Driver and passenger seat back temperature sensors
• Driver seat module
• Driver door module
• Passenger door module
When there are modules involved in the operation of any componet that's acting up , the module's electronic's could be the culprit ! But without testing who's to say what the problem could be !
I would have it check for DTC'S
DTC B2425 or B2430
The driver and passenger seat heaters are controlled by the driver seat module. Power is supplied to the driver seat cushion and back heater elements through individual voltage supply circuits. Power is supplied to the passenger seat cushion and back heater elements through a common voltage supply circuit. All of the driver and passenger seat heater elements are grounded by the driver seat module through individual low side drive control circuits. The heater element control circuits are pulse width modulated to ground by the driver seat module in order to control the seat temperatures by regulating the current flow through the heater elements.
DTC B2435 or B2440
The driver seat module relies on inputs from thermistors installed in the driver and passenger seat backs to control heated seat temperatures. The thermistors are 2-wire sensors supplied with a 5-volt referenced signal circuit and low reference circuit from the driver seat module. Resistance through the thermistors varies with temperature causing the heated seat sensor signal circuit voltage levels to decrease as the seat back temperatures rise.
Install a scan tool.
Start the engine.
Turn the heated seat ON.
With a scan tool, observe the Heated Seat Sensor parameter in the data list for the driver seat module.
Does the scan tool indicate that the heated seat sensor parameter is within the specified range?
0.078-4.94 V

Dec 08, 2016 | GMC Yukon Denali Cars & Trucks

2 Answers

Trying to find which fuse is for the heated seats on a 2004 ford explorer sports trak


Heated Seats
This system allows the electrical heating of the front seats on passenger demand.
The components of the system are:
  • the seat heating elements located in the seat cushion and backrest.
  • the heated seat control switch, located on the seat side trim panel.
  • temperature sensors located in the seat cushion heating elements.
  • heated seat relay.
Do both front seat heaters not work ? Do you know how to test electrical circuits with voltmeter ?
PINPOINT TEST J: THE HEATED SEAT IS INOPERATIVE Test Step Result / Action to Take J1 CHECK HEATED SEAT SWITCH OPERATION
  • Key in ON position.
  • Press the heated seat switch on the driver and passenger seats.
  • Are both heated seat switch indicators illuminated?
Yes
If both indicators illuminate, Go To Pinpoint Test K . If only one indicator illuminates, GO to J5 .

No
GO to J2 . J2 CHECK THE HEATED SEAT RELAY CIRCUITS
  • Key in OFF position.
  • Disconnect: Heated Seat Relay C3250 (located under the driver seat).
  • Key in ON position.
  • Measure the voltage at heated seat relay C3250-86, circuit 1003 (GY/YE), harness side and ground; and between C3250-30, circuit 566 (DG), harness and ground.
    s5r~tr~en~file=a0078817.gif~gen~ref.gif
  • Are the voltages greater than 10 volts?
Yes
GO to J3 .

No
REPAIR inoperative 1003 (GY/YE) or 566 (DG) circuit. TEST the system for normal operation. J3 CHECK HEATED SEAT RELAY GROUND CIRCUIT
  • Key in OFF position.
  • Measure the resistance between heated seat relay C3250-85, circuit 57 (BK), harness side and ground.
    s5r~tr~en~file=a0078818.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
GO to J4 .

No
REPAIR circuit 57 (BK). TEST the system for normal operation. J4 CHECK THE HEATED SEAT RELAY
  • Install a fused jumper lead between heated seat relay 3250-30, circuit 566 (DG), harness side and heated seat relay C3250-87, circuit 1064 (YE/LB), harness side.
    s5r~tr~en~file=a0078819.gif~gen~ref.gif
  • Do both heated seat indicators illuminate when pressed?
Yes
INSTALL a new heated seat relay. TEST the system for normal operation.

No
REPAIR circuit 1064 (YE/LB) to switches. TEST the system for normal operation. J5 CHECK INOPERATIVE HEATED SEAT SWITCH INPUT
  • Key in OFF position.
  • Disconnect: Heated Seat Switch C320 (Driver) or C321 (Passenger) for the inoperative heated seat.
  • Key in ON position.
  • Measure the voltage between heated seat switch C320-2 (driver) or C321-2 (passenger), circuit 1064 (YE/LB), harness side and ground .
    s5r~tr~en~file=a0078820.gif~gen~ref.gif
  • Is the voltage greater than 10 volts?
Yes
GO to J6 .

No
REPAIR circuit 1064 (YE/LB). TEST system for normal operation. J6 CHECK CIRCUIT 57 (BK) FOR AN OPEN
  • Measure the resistance between heated seat switch C320-4 (driver) or C321-4 (passenger), circuit 57 (BK), harness side and ground.
    s5r~tr~en~file=a0078821.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
INSTALL a new heated seat switch. TEST the system for normal operation.

No
REPAIR circuit 57 (BK). TEST the system for normal operation It's not that simple , being a fuse . It's probably the relay or the heating element .
PINPOINT TEST K: SEAT DOES NOT HEAT BUT THE HEATED SEAT INDICATOR ILLUMINATES WHEN PRESSED ? Does it ?
Your best bet would be to take to a qualified repair shop .
Do

Jun 29, 2016 | 2004 Ford Explorer Sport Trac

1 Answer

Acadia driver seat electric adjust not working and driver and passenger heater not working


reconnect and the connect back the cabel joint under ther the driver seat

Nov 24, 2013 | GMC Cars & Trucks

1 Answer

2005 Chevy Tahoe, Driver seat will not move and driver heated seat will not heat?


Have you checked the fuse? Look in owners manual for the fuse block and see if the fuse is burnt.

Dec 01, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

The driver's side heated seat won't turn off on my 2003 Mecury Moutaineer. Also, how do I change my cabin filter?


Your vhicle build date is on a blue sticker on the driver door or door frame. If not there, check other doors.
The heated seat Module is under the seat. You can unplug the connector on it or the heated seat switch to shut it off. I supect the module is bad. get one used from car-parts.com. The cabin air filter is under the leaf screen at the base of the windshield. Remove wiper arms and leaf screen for access. Please rate, thanks. Principles of Operation - Heated Seats - Vehicles Built 03/2002 Onward
NOTE: Two heated seat modules are used, one for vehicles built up to 03/2002 and one for vehicles built 03/2002 onward. The modules are not interchangeable.
The driver and passenger heated seats share a common battery and ignition feed. A shared ground source supplies the heated seat control switches. When the heated seat control switch is pressed with the ignition switch in RUN or START, a momentary ground signal is sent to the heated seat module. The heated seat module then supplies power to the heating element circuit. The cushion element and seat backrest element are wired in series and powered by the same output. The heated seat module also will ground the separate indicator circuit at the dual automatic temperature control (DATC) module display panel to indicate an ON state. The heated seat module will remain on until the heated seat control switch is pressed and a momentary voltage signal is received, or until 10 minutes expire. If the ignition source is removed from the module, the heated seat module will enter an OFF state and will not return to ON until the switch is once again pressed with the ignition switch in RUN. The heated seat module is designed to heat the seat to 37.5?C (99.5?F) and maintain the temperature until time-out or switched off. This temperature is maintained by the heated seat module monitoring the temperature sensor located in the seat cushion element, and adjusting the current flow to the heating elements.
--------------------------------------------------------------------------------------------------------------------------------

May 22, 2011 | 2003 Mercury Mountaineer

1 Answer

MY DRIVER'S SEAT ONLY HEATS THE BACK PORTION AND PASSENGER SEAT ONLY HEATS THE BOTTOM... ANY SUGGESTIONS... FUSE OR REPLACE HEATERS...


-The passanger seat only heat the bottom of the seat. It does not have a heat pad in the back portion.

-For the driver seat, it sound like the bottom heat pad had burn out and need to be replace. The back portion and bottom share the same fuse. It takes time and the right tool to replace this heat pad, trust me I know.

Jan 20, 2011 | 2004 Honda Accord

2 Answers

Driver seat heated seat does not work. It is on for 3 sec and then trips out or shuts off. The passenger seat is fine. Any idea of what causes this and how can I fix it?


I have the same problem with my 03 2500 sierra hd driver seat. lights up for a split second but shuts off. Passenger seat heats fine. Any fix yet?

Nov 16, 2010 | 2003 Chevrolet Tahoe

2 Answers

FRONT HEATED SEATS


you need to check the resistance in each of the heated seat elements in the seat. There's a two wire connector under the back of each front seat. The connector should be green. disconnect it and measure the resistance along the circuit going into the seat. if it isnt .1 - .3 ohms, replace the appropriate heated seat element

Jan 04, 2010 | 2004 Cadillac Escalade

1 Answer

Lost power to the driver seat and heat for both front seats


CHECK FUSES AND LOOK UNDER SEAT FOR A PLUGS IN WIRE, ALOT OF MODELS HAVE THE POWER PLUG UNDER THE SEAT, TRY THAT ,ROBERT

Jun 15, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Driver Heated Seat 03 Suburban


The most likely failure point is the driver heated seat elements. They probably have excessive resistance and once they warm up a little they short out the module and it defaults to not working. I would recommend replacing both upper and lower driver seat elements.

Aug 12, 2008 | 2003 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...