Question about Buick Century

1 Answer

Do not know the order the spark plug wires go from coil to cylinder i have the correct firing order and coil order

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

General motors cars all have basically the same cylinder numbering order, odd on the driver's side on rear wheel drive cars and front on front wheel drive cars. So, it will be1,3,5 on the front and 2,4,6 on the rear or pass. side. Firing order should be 1,6,5,4,3,2.

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When i turn on my 04 taurus. It starts makin knock sound , i replaced my lower intake n i think i missplaced the spark plug wiring


If the spark plug wiring is not correct, the engine will misfire and that will create erratic combustion, which is a shock to the cylinder, which results in a load harsh noise. Locate the number 1 spark plug wire on the distributor cap and trace each wire to the spark plugs. The firing order will be listed on the intake manifold. Make the correct wire to spark plugs attachments as needed.

Oct 11, 2016 | 2004 Ford Taurus

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

Truck is not firing on 3 cylinders yet it runs.. Runs really rough, back fires, under powered.. Plugs are Wet, Firing order is correct. New Spark plug cables. Don't know that is wrong! Please Help


Check for spark at the plug ( may have coil problem).
If spark is good then do a compression check. Pressure shouldn't be less than 75% of known good cylinders.

Apr 17, 2013 | 1995 Dodge Dakota

2 Answers

Need to know spak plug firing order for a 1996 pontiac grand am


4-cylinder:

Firing Order: 1-3-4-2

3.1 liter:

Firing Order: 1-2-3-4-5-6
jturcotte_599.jpg

Sep 04, 2011 | 1996 Pontiac Grand Am

2 Answers

How do you put the spark plug wires back in the correct order if you forgot the right order by not marking them???


The oil should be labeled 1-6. The spark plugs on the front of the engine ( radiator side) are from the passenger to the drivers side 1-3-5. The cylinders on the back side of th engine are from passenger to the drivers side 2-4-6. Put the worse from the cylinder to the corresponding number on the coils. If your coils are not labeled I would need to know the eight letter of your vin number to get you the correct coil numbers.

Jun 21, 2011 | 1997 Buick LeSabre

1 Answer

Firing order. took the spark plug cables off and don`t know where they go back


First,look at the coils see if the towers are numbered.Each coil fires 2 cylinders!
look on intake manifold for fireing order display! The v6 engine fires from one bank across to the other in a straight line example,cylinders 1&2 3&4 and 5&6 at the rear of the engine or farthest right side. 1&2 left side faceing engine 3&4 in the middle. All you need to do is find cylinder # 1 hook up the # 1 wire to the # 1 coil tower to the # 1 plug or cylinder,follow the fireing order 123456,its simple if you cant see coil tower numbers look at another car with same engine that has distributor less ignition.The coil pack for the 4 cylinder gm has plug wire terminals or towers numbered as well.Only in a harder place to see like behind and underneath!

Sep 08, 2010 | Buick Skylark Cars & Trucks

2 Answers

Need to know the correct spark plug wiring firing order


You might find the firing order is cast into the manifold a lot of the oldsmobiles had this!

Jun 24, 2010 | 1996 Oldsmobile Aurora

1 Answer

Firing Order diagram for 2006 Ford Explorer


Hope this helps. The ignition coil:
  • changes low-voltage pulses from the PCM to high-voltage pulses.
  • fires 2 spark plugs simultaneously.
  • has 3 transformers.
    • One transformer fires the spark plugs for cylinders 1 and 5
    • One transformer fires the spark plugs for cylinders 2 and 6
    • One transformer fires the spark plugs for cylinders 3 and 4
Spark plug wires:
  • carry high-voltage pulses from the ignition coil to the spark plugs.
The spark plugs:
  • change high-voltage pulses to spark at the gap, which ignites the fuel and air mixture.
The firing order is 1-4-2-5-3-6.

69efa96.jpg

Jun 06, 2010 | 2006 Ford Explorer

1 Answer

2004 KIA OPTIMA WON'T START AFTER SPARK PLUGS WERE CHANGES


HI. There are several areas of concern here. I will list them below. Check all areas stated in the list for faults.

Possible cuases:

1. Incorrect firing order set. On the 2.0, 2.4 and 2.7 engines. These engines are equipped with a distributor-less ignition system. This system incorporates a coil pack assembly, along with wire sets. In order for the assembly to fire correctly, the order of the wires must be set to the proper sequence. if not, the engine will not turn over, or start correctly. Make sure your firing order is correct, and make sure you have not placed a particular wire set into the wrong cylinder. I will post a picture of the correct firing order for your engine, below this list, shortly.


2. Incorrect spark plug gapping procedure. If the new spark plugs were gapped incorrectly, this will not allow for proper spark, thus, preventing optimal combustion, due to lack of fire. Check the spark plug gap using a wire gap gauge, and adjust if necessary. The gap should be 0.039-0.043 in. (1.0-1.1mm)

3. Failed coil pack assembly. This will be the worst case scenario. The coil pack supplies the necessary current that fuels each plug. The current is transferred, via wire sets.This will be the culprit if all the above areas are proven to be operational, and in good shape.

4. Failed wire sets. Replace the wire sets if faults are found at the connector at the ignition coil pack, or at the plug boot.



NOTE*
In order to provide the correct firing order for your engine, i will need the engine size and liter information, if possible. Please post this information, asap. Thanks..

Mar 24, 2010 | 2004 Kia Optima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...