Question about 1987 Nissan Pathfinder

1 Answer

1987 pathfinder, LH headlight low beam does not work, i have checked the fuses and tried switching it with the RH one, which works fine on that side, not on the left, and the light from the left side works on the right. can someone help. oh and i have the haynes manual but i am having trouble reading the schematic

Posted by on

Ad

1 Answer

Sounds like a wiring issue

Follow what hopefully are accurate
wiring diagrams, you have in Haynes

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spare fuse number for headlights on 2007 g6


There are four 10A fuses: LH LOW (beam) FUSE 7; LH HI BEAM FUSE 11; RH LOW BEAM FUSE 9; and RH HI BEAM FUSE 12. The fuses are located in the underhood fuse block.

Sep 09, 2016 | 2007 Pontiac G6

1 Answer

Right low beam stopped working, where is the ground wire run to check that


Do the high beams work?

The ground point is on the apron ( the inside of the fender, just behind the headlight). There is one on each side. From the wiring diagram, there is just a splice connecting power to the lights in parallel for the high and low beams, but the grounds are separate.

If the RH high beam and the LH low beam works, then it is not a ground problem. You could just tap the LH wires to power the RH, but I think that if you look closely the connector for the bulb is probably melted. If that is the case then you will have to splice on a new connector.

The colors are as follows:

RH --> low beam power ( light blue)
LH --> low beam power (white OR light blue)
BOTH high beams --> ( red/white stripe)
Ground --> Black

Sorry, The diagram is too large a file to upload.

Jan 12, 2014 | 2000 Mazda Millenia

1 Answer

1997 Chevy Cavalier. Bulbs/Fuses are good. Weird Headlight issues.


It could be a ground problem, or the dimmer switch. I would check for power and ground at the lights with them unplugged and then take a look at the dimmer switch.

Dec 09, 2012 | Cars & Trucks

1 Answer

Where are the Headlight relays on 2002 Renault clio


The headlamp circuit is rather simple. From the 15 amp RH headlamp fuse, there is a red w/yellow trace that goes to the RH high beam. Out of the 15 amp LH headlamp fuse, the wire going to the LH Hi beam is solid red. Both of these wires should have power when the headlamp relay is energized. The wires from the Hi Beam bulbs going back to the switch should both be red w/black trace. The wire going from the headlamp relay to power the 2 15 amp fuses is white. The headlamp switch applies a ground to illuminate either the Lo Beams or the Hi Beams.

Sep 11, 2012 | 2002 Renault Clio

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

2 Answers

I just cahnged the headlight for my 2003 altima but the light still does not work.the bulb is fine. what is wrong?


each headlight on those vehicles has its own fuse (if im remembering correctly), check the fuse panel under the hood, there should be fuses labeled for lh and rh high and low beam lights.

Nov 25, 2009 | 2003 Nissan Altima

1 Answer

Low beam headlight are not working. high beams and fogs lamps work fine. is there a fuse for a controller?both low beams stopped working at the same time so i don't think it the fuse for the headlamps.


The problem could be the headlamp switch.
You are right about the fuses.There is one for the LH high/low and one for the RH high/low.
Have you tried turning on the lamps manually with the switch?

Nov 10, 2009 | 2006 Pontiac Torrent

1 Answer

Passenger headlight don't work 2003 lincoln navagator


high beam or low beam? or both of them on one side.

  • One low beam headlamp is inoperative
  • Central junction box (CJB) fuse 23 (10A) (RH headlamp).
  • CJB fuse 25 (10A) (LH headlamp).
  • Circuitry.
  • CJB.
  • Go To Pinpoint Test C .


  • One high beam headlamp is inoperative
  • Circuitry.
  • Headlamp assembly.
  • Go To Pinpoint Test D .

  • The high and low beam headlamp is inoperative on one side
  • Circuitry.
  • REPAIR ground circuit 57 (BK).


  • Headlamp switch
  • Multifunction switch
  • Vehicle Security Module
  • Central junction box (CJB) fuse(s):
    • 17 (15A)
    • 23 (10A)
    • 25 (10A)
    • 35 (20A)
    • 40 (20A)
  • Circuitry
  • Headlamp bulbs
  • Daytime running lamp (DRL) relay



Apr 19, 2009 | 2003 Lincoln Navigator

Not finding what you are looking for?
Cars & Trucks Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...