Question about 1991 Nissan Pickup

2 Answers

Blower motor turns on only on high setting - 1991 Nissan Pickup

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

You will need a blower motor resistor. It has 2 screws holding it in. Rectangular in shape. When you take out it will have a bunch of electronics on the inside. Just replace

Posted on Feb 03, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,050 Answers

There will be a device mounted in the heater box, just in front of the blower motor fan called a: "blower motor resistor". This is what controls the lower speeds. It will have a couple screws holding it in the blower box and a few large wires going to it. You should be able to get a new resistor at any auto parts store, it will be your problem.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 navigator fan blows high as long as the car is started and won't turn off.


You will need to replace the blower motor speed control module/resistor, it is burned out. it is located next to the blower motor.

Feb 28, 2014 | Lincoln Cars & Trucks

1 Answer

Heater blower only works on high


Most likely the blower motor resistor or the fise for the low speeds. The high setting for the blower motor is on a separate circuit than the other lower settings.

Dec 04, 2013 | 2008 Chevrolet Hhr

1 Answer

1993 Ford Escort Blower Motor & AC Switch


I'm going to start from the beginning.
The blower motor gets power from the high blower relay and it is grounded thru the fan switch and the resistor. So you should have power on the pink white blower wire coming from the high relay to the blower motor. The orange black wire from the motor is ground going to the resistor and fan switch. The blue wires on the control panel are for the ac compressor.
The high blower relay gets power from fuse number 5 in the box. The blower motor is grounded thru the resistor and then thru the fan switch.
Photo courtesy of AutoZone.com
8225d139-b5ea-40f6-9385-db5752cd78be.gif

Jun 10, 2013 | 1993 Ford Explorer Limited

2 Answers

Blower stopped working on 2002 dodge caravan


Someone would need to check the blower motor and the resistor for voltage and ground.

Dec 09, 2012 | 2002 Dodge Grand Caravan

3 Answers

The heater squeels when on the high setting and does not work on any other setting I am trying to find an online guide on how to change the blower motor or is it the blower motor resistor? its for a 2002...


Blower motor is bad. Resistor controls speed. Motor is so worn out that it will only turn when set on high. Best to replace it before it burns out something else due to the high current draw.

Feb 02, 2011 | 2002 Chrysler Town & Country

1 Answer

When I turn on Blower the ac lt comes on but the


could be the blower motor or the blower motor resistor. if its the resistor the blower will usually work on high only with the settings not working. if it doesnt work on any setting it may be the blower motor itself

Oct 25, 2009 | 2003 Buick Century

1 Answer

What's causing my 2005 E-250 blower motor not to work.


does the motor not work at all or only on high setting? if only on high setting, i would recommend replacing the blower motor resistor. if it does not work at all, i would check the blower motor fuse first, if that has power, i would unplug the blower motor, key in run, and turn the fan on, then check for power at the blower motor connector, then check for ground, if both present, then replace the blower motor.

Oct 24, 2009 | 2004 Ford E250

1 Answer

My fan/blower won't run on high setting. It works


Replace relay under blower motor, under hood.

Jun 25, 2009 | 1993 Buick LeSabre

2 Answers

Blower motor will not turn off when car is off.


If it's only working on high setting it is usually the blower resistor that needs replacing. They are usually located under dash, passenger side, remove cover, and it should be bolted or screwed near blower motor itself. $10-$20 part

Mar 01, 2009 | 2005 Chevrolet Impala

1 Answer

Blower for heater stopped


Remove the hush panel under the dash and unplug your blower motor turn the knob and see if its getting power. If it is replace the blower motor. If your heater seems to work on high but not the other 4 settings. replace the blower motor resistor and pigtail (same general location as blower motor)

Jan 31, 2009 | 2004 Chevrolet Silverado 2500HD

Not finding what you are looking for?
1991 Nissan Pickup Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...