Question about 1993 Dodge D150

1 Answer

Just bought a BWD speed sensor for my 1993 Dodge d150. It came with a new wiring harness. Do i have to change it? The old sensor was working fine just leaked fluid everywhere.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had same problem same truck. the fix is do not use the bwd or any other aftermarket speed sensor!! they will all leak,dodge came out with the upgraded one with internal seals to stop this in late 1993,cause too many were leaking. the upgraded part# is 5013660aa,it has a white colored inside body your original is all black,that is why you have to change the little wir harness they give you. look this up will help you also (TSB 21-14-94).
this up grade was only done by dodge so all the aftermarket ones are junk.

Posted on Jul 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 dodge d150 318 getting spark and has fuel pressure but wont run. what could it be?


Sounds like your timing chain may have broke or jumped a tooth sorry for my spelling that is where I would check next hope this helps

Mar 12, 2013 | 1993 Dodge D150

1 Answer

Ignition issues


Trying to diagnose others work can be difficult but have done it many times. First I need to know basically at this point if you are getting power to the dark green & orange wire at each injector as well as the dark green and orange wire at the coil itself. If you have an ohm meter check to see if you are getttting continuity from that wire at the coil as to any of those wires (dark green and orange) at any of the injectors. Below is a picture of some relays under the hood. The one with the red arrow is the auto shutdown relay which will cause no power to all those dark green and orange wires. You may still have fuel prssure but this will shut down power to the injectors as well as power at that wire to the coil. The other relays that have the x out mark are needed but the one with the yellow arrow is the A/C clutch relay. I'm not 100 percent sure so check the numbers to see if they match. If they do swap those 2 out to see if it may be a relay issue. This is what I would start at first. Start from point "A" the basics (this test) and go on to the next step. There are fuse links as well but lets start here. Feel free to email me directly for any other tests if needed at csautomotivecars@att.net and I will be happy to try and help. No there won't be a cost to you but do remind me of what's been done so far as well as the model and engine size. Hope it's something this simple for you...


7_10_2012_9_44_02_pm.jpg

Jul 10, 2012 | 1993 Dodge D150

1 Answer

I have a Dodge D150 1/2 ton pickup. The Speedometer works fine, but the Odometer does not work. Could this be the speed sensor in the transmission?


had same problem a gear was striped out in the gauge set **** speedo fixed it prity cheap an got a 2 year warrenty hope i could help

Oct 05, 2010 | 1991 Dodge D150

1 Answer

I have a 1993 dodge d150 318 no spark or no power to fuel pump could it be the crank sensor?


A BAD CRANK SENSOR WOULD NOT CAUSE A LOSS OF POWER TO THE FUEL PUMP. ARE U SURE ABOUT THAT, THE FUEL PUMP ONLY RUNS FOR 1 SECOND WHEN THE KEY IS TURNED ON UNBLESS ENGINE IS STARTED. DO A FAULT CODE TEST ON THE COMPUTER, GO TO THE WEB LINK FOR INSTRUCTIONS AND A FAULT CODE LIST, VERY EASY TO DO.
http://www.extreme-check-engine-light-codes.com/Chrysler%20OBD1%20Decoder.htm

Sep 24, 2010 | 1993 Dodge D150

1 Answer

I have 1992 Dodge D150 with 318 magnum. It won't


is this vehicle fitted with a chipped key ?? iam thinking factory immobilisor here?? but not sure what year it was introduced in america

Nov 22, 2009 | 1993 Dodge D150

1 Answer

Cruise control removal


You will need to get a new speedometer cable for a non cruise equipped truck.

Mar 06, 2009 | 1993 Dodge D150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...