Question about Volkswagen Scirocco

1 Answer

How do I change the air filter & can I adjust the dipped beam headlight other by dashboard control?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,874 Answers

For VW Golf mk5 with 2.0 TFSI engine - air filter replacement instructions:
1. Unplug the Mass Air Flow (MAF) sensor.
2. Undo the spring clips and pull out the turbo inlet connector. 3. Remove the two T-25 screws on the air snorkle as shown below. 4. Remove the engine cover by pulling up HARD where indicated by the green circles in the photo below. 5. DO NOT APPLY ANY FORCE where indicated by the red diamonds in the photo below. 6. If it's cold weather, make sure the engine is warm so that the rubber grommets warm up and are flexible enough to come off. Cold, brittle plastic and stiff grommets will lead to a broken airbox/cover even if you otherwise do everything correctly. 7. Pull up on the rear driver's corner (near the battery box) first, then the rear corner where the MAF sensor is, then the fronts.

How do I change the - tdisline_408.jpg


2. Each headlamp is equipped with two adjustment screws: one for lateral adjustment, and another one for height adjustment.

Posted on Apr 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights


Turn on the headlights on the low beam (dipped) setting. When you adjust the low beams, your high beams should set to the right level as well. With the lights now on:http://www.diyobd2.fr/wholesale/was-multi-diag-trcuk-heavy-duty-bluetooth-multi-language-diagnostic-tool-2669.html , see how the beam matches up with the horizontal and vertical tape lines you have placed on the wall.

Oct 21, 2013 | 1995 Pontiac Firebird

1 Answer

Dipped beam headlights not working fiat stilo


the relay has blown & will need to be replaced

Sep 13, 2012 | 2004 Fiat Stilo 1.4

1 Answer

Adjusting bi-xenon headlights on Volvo S40


This guys don't know what they are talking about. If you have self leveling head lights and they are way out of alignment, yes there is adjustment screws but those mess with a different light bulb (daytime running light) instead of the main bulb alignment.

So what is a man to do? go to the dealer and have them adjust them for you. Believe it or not everytime you get an aliment done you have to recalibrate your headlights because they change the way the vehicle sits. Do it enough times and the headlight will go out of wack (because of the self leveling function)


In other words, they headlights are adjusted by means of a Computer. You could do it your self but you have to buy the DICE VIDA adjustment tool and the proper software from Volvo. Not cheap, just go to the dealership.

Jul 05, 2012 | Volvo S40 Cars & Trucks

1 Answer

Where is dipped bulb


in your headlight you have side light a dipped light and a main beam normally the one bulb has your dipped light and your main beam sometimes the dipped light can go and you need to change the bulb ,even though the main beam maybe ookay

Sep 18, 2011 | 2006 Porsche Cayenne

2 Answers

I have a 1984 Mitsubishi L200 Express 4WD diesel utility and it needs a replacement headlight switch. But nowhere in the whole country is one available. I am faced with the two choices of fitting a...


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Apr 07, 2010 | Mitsubishi Pickup Cars & Trucks

1 Answer

1998 Ford Escort dashboard warning lights and gauges not working.


Sounds like possibly the ignition switch is going out. Try jiggling the key in the ignition in the on position and see if your lights come back on.

Feb 15, 2010 | 1998 Ford Escort

1 Answer

05 Renault Grand Scenic. No dipped headlights. Bulbs and fuses OK


Are u sure that the bulbs are OK? I had no dipped lights on mine, & thought it must be a fuse or another electrical fault. It turned out, both bulbs had gone. I think this often happens when one side goes, the other soon follows.

Feb 10, 2010 | 2005 Renault R5

1 Answer

I'm looking for the fuse identifier for a dipped headlight on my A4.And any troubleshooting advice id welcome. Thanks.


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.



Jan 24, 2010 | 2004 Audi A4

1 Answer

No dipped beam headlights on audi a4 1,9td 2003


Check up dipped beam headlights fuse inside fuse box. For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram. If the dipped beam headlights fuse is OK, check up dipped beam headlights bulbs.

Dec 28, 2009 | 2004 Audi A4

1 Answer

I am driving to spain soon, can I adjust the main beam dipping direction from left to right hand dipping without replacing the headlight unit?.


Unfortunately you cannot. The beam pattern itself is different. On left hand drive cars, the actual beam is designed to throw the least amount of light into oncoming cars and will look something like this.
_________
________/


you can't change the pattern as the housing unit itself is what depicts the pattern projected.

Oct 05, 2009 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...