Question about 2007 Mazda Rx 7

1 Answer

In your field

Bro, check this out...

parang computer problem spark daw...

Posted by on

  • francis rivero Aug 05, 2008

    we repair one rx-8 before and we traced the problem with replaceing not only the ecu, but the ignition key that comes with the ecu, its alarm module and even its instrument panel. the guys from mazda told us that they are all related in one car. all programmed to work as one. if you replace only one component, it willnot run...



  • francis rivero Aug 05, 2008

    but that was for an not sure if it is usable for an rx-7?...hehehe they would say i am guessing ....

    well..the problem was really not a no spark only, the engine went down to the flood, the ecu, every thing...but once the engine was overhauled, the ecu was replaced then there was no spark...then that is the time we went to mazda philippines for help. so they suggested that the ecu from the states from which came from a used car there for us to get the alarm module, ignition switch, and the instrument panel. once the units arrived, the car just started right away.





1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Thanks, replied to it. The user has replace the ECU already and the most critical, the crank angle sensor. Probably something basic, like a missing ignition B+12.

Kind regards.

Posted on Aug 05, 2008

  • Louie  Role
    Louie Role Aug 05, 2008

    Wow, that's a lot of hardware for a no spark problem. Why don't you post it there likewise. That info beats some of the other postings.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

Cant get mazda rx-7 to start

  • have you checked your batteries?
if not please check it..

Aug 05, 2008 | Mazda RX-7 Cars & Trucks

1 Answer

91 mazda rx-7 will not start


Nov 29, 2009 | 1991 Mazda RX-7

1 Answer

How to wirer to spark plug

Try this web site for the info.
I hope this works!
Good Luck .!

Aug 09, 2009 | 1983 Mazda RX-7

2 Answers

Mazda well not start after driving short distance

i had something like that happen to my truck. died on freeway, after sitting for four hours it started up and ran fine, one little rectifier in the wiring harness just got hot and killed power to the computer,

Feb 24, 2009 | 1986 Mazda RX-7

1 Answer

Backfiring a little and wont start up

did you check the spark plugs? try that maybe you are not getting proper spark and thats why you are back firing and it is turning off.... i would recomend changing plugs and wires.

Sep 22, 2008 | 1993 Mazda RX-7

1 Answer

In your field

Hi nutsnigga,

As you've got spark the engine must be turning over, otherwise you wouldn't know.... You say that the starter just clicks and the battery is new....If the engine is turning, what do you mean....

If you have spark and fuel and the engine is turning, you've got another problem.....but one that's related.....The most likely, especially if you carried on until the engine became so hot, it stopped you!....the cylinder head gasket has blown....Check the oil and see if it's turned a milky grey colour.....If it has....cylinder head and or gasket....but that's not the end....You may have seized rings or seals....Is it a rotary engine?... With engines these days, the operating temp is much higher, part of falling in with emission controls.....the down side..... if it over heats, much more damage.....Check the compression and see if there's leakage.

Best of luck Johngee10

Sep 05, 2008 | 1985 Mazda RX-7

1 Answer

In your field

starter clicks its the starter motor tap it and it will work again

Sep 04, 2008 | 1985 Mazda RX-7

1 Answer


i can provide you 1 ebook that contains diagrame

or you can visit my site named

Try this & solve your problem

May 16, 2008 | 1986 Mazda RX-7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides