Question about 2008 Scion Xd
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To reset your maintenance reminder system (even if the light hasn't
come on yet), you'll need to turn your key to on (but don't start!) and
make sure your odometer is on TRIP A. Then key off. Press and hold the
Odometer/Trip button. While holding down on the button, key the
ignition to on (Don't start the engine!) The display panel will count
down from "------" to "-"Continue pressing the button until the Trip A
is displayed. After this step, you are done.
Here can find one video about this procedure: Youtube vj7kK5i2tPc
I hope helps with this (remembe rated this help) Good luck.
Posted on Dec 29, 2009
SOURCE: were is the oil filter
2008 Scion xD oil filter is a cartridge (element only) type. It is located under a heavy, black plastic cap right next to the oil drain plug. To remove the cap, you will need a Toyota "Special Service Tool" or an Assenmacher Specialty Tools "TOY640" or similar cap wrench. Toyota is the only source for the oil filter element; make sure you get a new o-ring (should be in the box with the filter element) and a new drain plug gasket.
Posted on Jan 16, 2010
Scion XD's are of a choice few that uses a Drop in filter as opposed to screw on types.
The filter housing is on the passenger side of the oil pan. The filter housing unscrews counter clockwise. Just put an oil pan underneath to catch the little bit of oil that leaks out. Pull the filter element out of the cartridge housing. Put the new filter element into the housing, remove the old O-ring on the filter housing, replace the O-ring on the filter element housing that is provided with the "new" filter element. It's always a good idea to lightly coat that new O-ring with motor oil before putting it on the housing, providing a better seal. Then with the new O-ring and filter element installed in the filter housing, just screw it on clockwise. It's really not much different than the old style screw-on type filters. The only place, so far, that sells the Xd element that I am aware of is Toyota. They are about $6 a piece. On a difficulty scale of 1 -10, I would declare this a (1.5). (1) being a regular screw-on type filter, and (1.5) for the cartridge type filter on the Xd.
Posted on Mar 04, 2010
SOURCE: oil filter removal on scion xd
Go to DenLors Tools.com and order the "ASTTOY640" It's 29 dollars, but it fits like a glove and works well. Threads ARE NOT left-handed. Just take off counter clockwise.
Posted on May 06, 2010
Tips for a great answer:
Mar 25, 2012 | 2008 Scion Xd
Jan 12, 2011 | 2010 Scion xD
Nov 17, 2010 | 2008 Scion Xd
Oct 28, 2010 | 2008 Scion Xd
Mar 04, 2010 | 2008 Scion Xd
Nov 24, 2009 | 2008 Scion Xd
1,073 people viewed this question
Usually answered in minutes!