Question about 2004 Ford F150

1 Answer

2004 f150 5.4 triton dyed wont start injectors spraying same time

Posted by on

  • 2 more comments 
  • wigginsdaw Apr 02, 2011

    in stall crank sensor injectors firing right tried to start but wont already replaced cam sensors

  • wigginsdaw Apr 02, 2011

    we have fire and fuel

  • wigginsdaw Apr 02, 2011

    we have fire and fuel

  • wigginsdaw Apr 02, 2011

    timing chains and phasers new no starting fluid


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Ford Master
  • 7,764 Answers

Hi, your computer may have gone to limp mode due to a sensor failure. I would suspect the camshaft position sensor, but I recommend you get a scan of the OBD2 connector to see if there is a trouble code. Do you have a scanner or maybe know someone that has one? It may also be possible to borrow one from Autozone.

Posted on Apr 02, 2011

  • 2 more comments 
  • Jeff Turcotte
    Jeff Turcotte Apr 02, 2011

    have you checked for spark? Please browse this post for ideas:

  • Jeff Turcotte
    Jeff Turcotte Apr 02, 2011

    OK, sorry for the delay. Is it possible your timing chain has slipped? Have you tried to scan the truck?

  • Jeff Turcotte
    Jeff Turcotte Apr 02, 2011

    Also, have you tried starting fluid?

  • Jeff Turcotte
    Jeff Turcotte Apr 02, 2011

    Sorry, can I ask you to go back a little and tell me what happened and what you have done so far? I get you changed the cam and crank sensors, and timing chain is new. Was it running since the new timing chain? Was the engine light on prior to it stalling and the no-start condition?


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Any one know 4by4 Mitsubishi triton no codes cranks need help urgent

the tachometer ( rev counter) get its impulses from the ignition system or in the case of a diesel from the crankshaft position sensor
if it runs with introduced fuel ( dangerous for a diesel) but then dies, that indicates insufficient fuel pressure to the injectors
could be a diesel pressure pump ( test to 25,000 psi) not producing sufficient pressure to work injectors
problem fuel supply to pump, tank venting, filters , air in system etc

Oct 05, 2016 | Mitsubishi Cars & Trucks

5 Answers

I have a 2004 Buick LeSabre V6 3800 Series 2 motor drove about 600 yards and then dyed it hasn't started back up since what is the problem do you think

Does it have spark ,is there fuel , is there compression ? If you have to ask you should take it to a qualified repair shop !

Sep 01, 2016 | 2004 Buick LeSabre

2 Answers

2004 Megane 2l 16v. It is cranking, has spark and injectors are spraying but refuses to start.

With spark and fuel both OK I'd have to suspect the timing. Has the timing belt or chain been disturbed for any reason? A worn belt can skip a tooth or 2.

Jan 25, 2016 | Cars & Trucks

1 Answer

Wont start

The injectors can't be spraying good or it would start. What is the fuel pressure reading?

Jun 14, 2013 | Cars & Trucks

1 Answer

My 2004 yukon xl wont start

You need spark at the right time, fuel pressure at the injectors, and normal compression.
Have the spark plugs been changed in the past couple of years ?
Have you checked the fuel pressure to see if it is enough ?
Have you sprayed carb cleaner into the throttle body to try to make the engine try to start ?
Does it sound like it has normal compression when cranking ?

Feb 09, 2013 | 2002 GMC Yukon XL

1 Answer

Chrysler pacficia wont start when i turn off car and i just got a new starter?

get some starting fluid and spray it in the throttle body and if it starts and then dies you lost fuel and it can be as simple as replacing the fuel filter and adding fuel injector cleaner but if it doesnt start then u lost spark and just about all the time on vehicles with coil on packs its the crankshaft postion sensor

Jan 29, 2013 | 2004 Chrysler Pacifica

1 Answer

Old j reg mercedes 230te wont start

Check Injectors spraying Fuel when you start. Fuel pump prime because you hear the pump. IF pump is weak, then your Fuel distributor doesn't have correct pressure to spray fuel when injectors open. Do your sparks plug wet after trying several times. If they are dry then you don't have fuel. Replace injectors If they are wet then you don't have correct air:gas ratio of 14.6:1. Replace Fuel distributors

Aug 10, 2009 | 1993 Mercedes-Benz Mercedes Benz 300 Class

3 Answers

1.5dci 2004 scenic wont start

hi is there fuel getting to engine?any vapour coming out exhaust?sometimes glow plugs not working can cause this.try a squirt of easy start into air filter.NOT MUCH!!READ INSTRUCTIONS.HIGHLY FLAMMABLE.then start car for about 10secs.get this from car accessorie shops.if it fires on this its highly likely glowplugs not working or fuel pumptiming out.its hard to say without seeing the car

May 18, 2009 | 2004 Renault 181

Not finding what you are looking for?
2004 Ford F150 Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers


Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides