Question about 2005 Dodge Ram Srt 10 Pickup

1 Answer

The truck transmission will not stay in reverse. You must hold the shifter in position for the transmission to stay in reverse. They are not any othe rshifting issues. What would cause this & what is required to fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

Why are you guys telling him to check his shift cable when this vehicle uses a hydraulic clutch? it's likely 1) hydraulics are leaking or 2) bad synchros. try replacing the hydraulics and clutch first. if that doesn't work out, you may need your ****** rebuilt.

Posted on Sep 28, 2012

  • Michael Lam
    Michael Lam Oct 03, 2012

    did they really just edit the word t.r.a.n.n.y.? it's short for transmission!

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 94 Camaro V6 transmission in reverse on all shifter settings

check to see if your shift cable is stretched or broken, also look on the transmission itself to make sure that the lever where the cable attaches to is not bent. also you can check under the shifter itself and make sure the linkage there is all ok. it sounds like your shifter cable is the cause for your problem.

if the cable is ok and you can see the shift lever move on the transmission than the next likely cause would be the valve body in the transmission.

Posted on Feb 17, 2009

  • 202 Answers

SOURCE: transmission won't come out of reverse

your Transmission is controlled by a cable on the mustang. it could have Came off of the transmission. it just snaps on to a lever on the transmission. or the cable broke. other wise it came unhooked from your shifter.

Posted on May 05, 2009

  • 850 Answers

SOURCE: My shifter is all out of wack can't tell what gear

check the shift for looseness

Posted on Jul 17, 2009

Hrnsly
  • 154 Answers

SOURCE: manual transmission stuck in reverse in my mx-5

You will have to remove the center console and then the shifter asm. look down inside where the shifter goes and you will see 3 selectors one will be out of position. You will need to pop it back inline with the other 2. After that look at the bottom of the shifter ther should be a bushing on the very end, if it is not there you will need to get one from your dealer, they are like 8 dollars and then you just pop it on and reasemble in reverse order and you should not have any more trouble.

Posted on Aug 12, 2009

  • 7 Answers

SOURCE: truck only goes in reverse

You are going to need to either replace the tranny or rebuild it from the sound of it. The one possiblity is that you are low on fluid. If that is the case it could be causeing your problems

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission


Sounds like you either have a cracked valve body or stuck valves inside of the transmission.

Jul 06, 2016 | Mercury Cars & Trucks

1 Answer

2005 cadillac cts shifter stuck in reverse


on top of transmission you can see the shifter cable remove it from lever. Try to move lever freely try to move the shifter if it stuck again
could be cable or transmission internal
hope it helps

Mar 22, 2014 | 2005 Cadillac CTS

1 Answer

F250 1998 light duty won't shift out of park


For car not changing gears and not shifting out of park mode ,it can be shifter assembly issue, or it can also be transmission issue. Get the shifter assembly inspected with ignition OFF.

For more troubleshooting, I suggest you to get the Following help link checked, its complete step by step procedure to inspect gear shift issues: -----

GEAR SHIFT ISSUES

http://alltypesofpartsreplacing.blogspot.com/2012/11/gear-shift-issues.html

==========


NO REVERSE ON TRANSMISSION
http://alltypesofpartsreplacing.blogspot.com/2012/12/no-reverse-on-transmission.html
-------------

Transmission fluid leak, transmission gears slip,
http://alltypesofpartsreplacing.blogspot.com/2012/12/transmission-fluid-leak-transmission.html
----------


These will help.

Thanks.

Dec 06, 2012 | 1998 Ford F250 SuperCab

1 Answer

Car pops out of 5th gear if u hold the shifter while driving it stays in gear. Any suggestions?


You most likely have a bent 5th/Reverse shifting fork inside the transmission and it is not moving the syncronizer fully into gear. You must remove and disassemble the transmission to fix it.

Aug 30, 2011 | 1997 Eagle Talon

2 Answers

Car will start fine, brakes work but once in drive or reverse will not move, think its the transmission. Car has 350k km.


When you move the shifter into the position P,R,N,D does the indicator on the gauge light up. For example in "P" the P indictor light up, "R" the R indicator light up and so on.
If it does then you might have a bad transmission.
If the indicator stay in one position only even when you' move your shifter back and forth. You might have a broken link cable from the shifter to the trans.

Jan 19, 2011 | 1997 Honda Civic

2 Answers

2004 F150 back-up lights stay on when ignition is turned on,


I recommend taking a look at your reverse switch (located on the side of your transmission with a couple of wires coming out of it). Odds are the switch is stuck in the on position

Sep 21, 2009 | 2004 Ford F150

2 Answers

No light on transmission gear


the light comes from a small bulb, pull the shifter out and replace the bulb

Apr 03, 2009 | 2000 Lincoln Continental

2 Answers

2002 pt is in reverse but my shifter doesn't work


make sure u have brake lights, the gearshift locks out until it recieves a signal u are stepping on the brake.

Feb 12, 2009 | 2002 Chrysler PT Cruiser

2 Answers

Need to locate backup light switch on 1988 chevy 1500


I had the same problem. My backup lights wouldn't come on in when I put the auto. trans. shifter into the Reverse position. They WOULD come on briefly as I moved the shifter from Park position into Reverse, but would go off again when the shifter reached the Reverse detent. I got the solution from the Haynes service manual, in which the relevant switch is referred to as something like the neutral safety switch. Check on top of the steering column close to the firewall. Set the parking brake, then move the auto. trans. shifter into Neutral position. Get under the dash and rotate the neutral safety switch clockwise as far as it will go. Then move the shifter into the Park position, and your switch should be set. If the backup lights don't come on now when the shifter is put into Reverse position with the ignition switch 'on', there may be another problem.

Feb 10, 2009 | 1988 Chevrolet C1500

1 Answer

Shifter physically won't move into reverse position


To isolate the problem as either an internal transmission problem,or external to the transmission,(shifter or cable malfunction),the shifter cables should be disconnected from the transmission.On the transmission are two levers,if you have a 5 speed trans.One is the neutral gate lever,and the other is actual gear shift lever.Manipulating the levers manually,see if the transmission will engage into Reverse gear.If the transmission engages into Reverse gear,then the problem is either in the shifter mechanism itself,or the shift cables.If the transmission will not engage into Reverse gear,then the problem is either an internal problem,or possibly a switch seized up,like the reverse gear indicator switch.At this point,i would have an assistant sit in the car,engine off,and run through all the gear selections with the shifter,while watching and looking for a cable not operating to its full stroke.Take the console apart to access the shifter mechanism and visually inspect the assembly.Disconnect the cables and operate them manually,one at a time,while an assistant watches them underhood.Visually inspect the shifter and it's mechanism for a broken,cracked,or damaged component.At this point,the problem should be identified and repaired as either cable or shifter malfunction.

Nov 25, 2008 | 2004 Dodge Neon

Not finding what you are looking for?

Open Questions:

See all 2005 Dodge Ram Srt 10 Pickup Questions

Cars & Trucks Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...