Question about 2000 Dodge Intrepid

1 Answer

Engine light on and cranks forever before starting 2000 dodge intrepid

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome to the site. Since there is over a hundred reasons for a check engine light to come on, you need to have it scanned at Autozone or Advanced. They do it for free and it might pick up why your car is acting like that. You could have a problem with the ignition system, such as plugs, coils, wires, coil pack. You could check your fuel pressure to make sure the fuel pressure is correct. Your best bet is having it scanned. This way, you are not spending time and money on parts you don't need. If you can't get a code, go by this. You need fuel, air, and fire to start your vehicle. You could have a clogged fuel filter or a leaking injector. If the fuel pressure checks out, you can rule out the fuel and start looking at the ignitions. If it has been awhile since your last tune up, it couldn't hurt. If you have any questions, feel free to ask. Thanks for using FixYa.

Posted on Apr 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1319 engine light came on


this car is listed as a 2000 Dodge Intrepid, not sure the engine size but the code p1319 .

i do not see this code for the 2000 dodge intrepid, is this the correct year,make model?

Jan 23, 2013 | 2000 Dodge Intrepid

1 Answer

My 1998 Dodge Intrepid is starting & then stalling only after a few seconds. The engine light came on, & the code was P1391. Any ideas?


That code is indicating an intermittant crank shaft or cam shaft sensor fault. Because the engine is starting then stalling, check to see if you have spark after the stall. If spark is still present, you are probobley looking at a cam sensor circuit issue. The cam sensor controls the fuel injector pulse. If the cam sensor fails on a chrysler product, the fuel injectors will not function.

Nov 25, 2011 | 1998 Dodge Intrepid

2 Answers

Code p0340 on 2000 dodge intrepid


it might be the cam shaft sensor it might be the crank shaft sensor the best thing to do is replace them bolth. but it does sound like it may be either one because if one goes out the other will still work but when starting the car it will take longer for it to read from either or the one sensor that is still working because they work together to tell the system to deliver the gas. im pretty positive that it is either the cam or crank shaft sensor

Jun 21, 2010 | 2000 Dodge Intrepid

1 Answer

I have a 2000 Dodge Intrepid with several problems. 1st being that the car does not start periodically. I turn the key and the lights come on but no start. It does after a few tries. 2nd being it has...


well the starting problem,start by checking the fuelpump,if it spins and doesnt start, but if you turn the key to start and it does nothing then take look at the starter, use a test light have someone hold the key in the crank position and test for power at the small wire at the starter if theres power and engine isnt spinning then replace the starter, the trany, i would start by first checking the fluid level, make sure engine is warm, with car at idle in park check level if the oil level is full in the trany then i would say its time for a trany shop to look at it, these cars have lots of trany problems. good luck.

Mar 02, 2010 | 2000 Dodge Intrepid

1 Answer

Ran scans and came up with intermittant signal


replace the PCV valve, its cheap, causes THAT to happen when dirty, and takes about ten minutes if you are comfortable working under the hood.

Aug 14, 2009 | 1999 Dodge Intrepid

1 Answer

My 2000 dodge intrepid will not start, just goes around and around.


YOU MOST LIKE HAVE VALVES CONTACTING PISTONS AND NOT ALLOWING ENGINE ROTATION..A 2.7 ENGINE IS AN INTERFERENCE ENGINE AND IF GOES OUT OF TIME WILL DAMAGE VALVES AND/OR PISTONS

May 31, 2009 | 2000 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 will crank at times but not start


had my grandmas car doing a similiar concern ended up being cranck sensor was 40 bucks took about 15 minutes not hard at all

May 28, 2009 | 2000 Dodge Intrepid

1 Answer

Vehicle Stalls


you should have engine light on and engine codes
if its the cam or crank sensors, shouldn't be the starter i would start with the ingition switch.

May 28, 2009 | 1999 Dodge Intrepid

1 Answer

2000 Dodge Intrepid Wont Start


first of all, check your code to see what the car computer shows. To do that , insert the key in the ignition and switch it on three time within 2 seconds and the third time live the key in the on position. All the instrument panel lights will lite and the oddometer will display the fault code that may br the cause for your car not starting. goood luck.

Apr 29, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...