Question about 1996 Mitsubishi Eclipse

2 Answers

Were is locate the master cylinder on eclipcse 2.0

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 2,428 Answers

For the brakes ? Its basicly under the hood on the fire wall mount to the vacuum booster control unit witch is located derectly in front of the steering wheel it will have two or three metal lines that are threaded into the right side of it with fittings and a removeable cap on top of it to check the fluid levelyou can't miss it

Posted on Apr 01, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

On the engine side of the firewall directly in front of where the brake pedal is. (The brake pedal attaches to it.)

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the clutch master cylinder on hyundai h100 located


this is the part
looks like its attached to the clutch pedal and has a booster close by


2 5L 41600 4F000 Clutch Master Cylinder HYUNDAI H100 PORTERII
26247239-p5duyrbkgvrt24iigb1f3ivd-3-0.jpg

26247239-p5duyrbkgvrt24iigb1f3ivd-3-2.jpg

Jul 28, 2016 | Hyundai Cars & Trucks

1 Answer

Im trying 2 locate where to put the clutch fluid in my 94 ford laser 1.6 glxi 5d


normally its brake fluid on the master cylinder there a hosethat goes or containr that bring oil to the master cylinder of the clutch

Apr 11, 2015 | Ford Laser Cars & Trucks

1 Answer

How do you prime a clutch on a transmission of a 2004 ford edge


For manual transmissions the master cylinder holds BRAKE fluid with a 2 ounce syringe filled with brake fluid and rubber hose on the end loosen bleeder screw on slave cylinder located on transmission near the engine squeeze the fluid into system master cylinder reservoir should start filling up this will force all air out the master tighten screw.

Apr 22, 2014 | Cars & Trucks

1 Answer

I have a 2006 Kia Spectra5 hatchback......wondering if the master/slave cylinders are located inside the transmission or ouside? My mechanic can't tell me without looking at the car...?


So we are talking manual transmission clutch operation here?

Your master cylinder is located on the firewall, on the other side of the clutch pedal. Your slave cylinder is located next to the gearbox bell housing.

The slave cylinder:
11_6_2012_11_53_26_pm.jpg

The master cylinder:


11_6_2012_11_54_27_pm.jpg

Nov 06, 2012 | Cars & Trucks

1 Answer

Master cylinder location


The brake master cylinder is on the firewall behind the steering wheel, in the engine compartment. The brake booster, right behind it, is a large circular chamber that the brake master cylinder is attached to with 2 bolts

Feb 02, 2012 | 1996 Ford Taurus

1 Answer

Where is the clutch master cylinder located


Open the hood, on the drivers side next to the brake master cylinder you will notice a small (1 1/2-2") black reservoir which says "CLUTCH" on the lid. Just follow the line down to the transmission.

Dec 16, 2010 | 1989 Jeep Wrangler

1 Answer

How to replace the oem clutch master cylinder on a 1988 ford f-150 ,,, where is it located on the truck?,,,


Removal:
1.From inside the cab, carefully pry the clutch master cylinder pushrod and retainer bushing from the pedal cross-shaft lever pin.
2. Disconnect and remove the interlock switch.
3. Remove as much fluid from reservoir as possible and place shop rags under the master cylinder to catch leaking fluid.
4. Disconnect hydraulic line from the master cylinder and plug lines and outlets to avoid contamination and excessive fluid loss.
5. Remove the two nuts retaining the clutch master cylinder.
6. Installation is the reverse of removal exept after installation, bled the system.

Feb 21, 2010 | 1988 Ford F 150

1 Answer

Need location of the master cylinder redundant bps


The master cylinder is located under the wiper motor on the driver's side. the bps is screwed into the master cylinder underside.

Aug 09, 2009 | 2000 Ford Windstar

1 Answer

Where is the clutch valve located on a 95 honda accord


clutch master cylinder is located drivers side firewall,right next to brake master cylinder. it has small shot glass size fluid resevoir mounted above it,fluid is fed through hose down into clutch master. clutch master cylinder has a rod mounter on ft of it that goes through firewall and attaches to clutch pedal under dash . clutch slave cylinder is mounted on ft passenger side of transmission assy. most common leak is from master cylinder,you would be able to look under dash ,follow clutch pedal up to where it attatched to clutch master pushrod.follow that rod to wear it meets up to a small 1 1/2" or so rubber boot.fluid will be leaking from that boot if master is leaking.

Jul 03, 2009 | 1995 Honda Accord

1 Answer

1995 Firebird


The clutch control system in your car is hydraulic,and utilizes a clutch master cylinder,similar to the brake master cylinder,and a clutch slave cylinder mounted on the exterior of the bellhousing.If the fluid has leaked out,both the master and slave cylinders need to be replaced with new.They should be replaced as a set,as one is just as old as the other.Adding fluid may build the pedal back up,but only temporarily.The clutch master cylinder and reservoir is bolted to the firewall,driver side,and should have a round black cap.The system uses regular DOT 2 or 3 brake fluid for the hydraulics

Aug 23, 2008 | 1995 Pontiac Firebird

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...