Question about 1989 Chrysler TC

Open Question

How do I replace a Chrysler TC (Maserati) turn signal bulb The book says to unscrew the lens cover but there are no screws. I don't see haw to get to the turn signal assembly. Do I need to remove the headlight assembly?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ginko
  • 19396 Answers

SOURCE: LOOKING 4 A 1991 CHRYSLER TC MASERATI MANUAL

You need to buy either haynes or chilton manual. I will see if I can find a link.

Posted on Sep 04, 2008

  • 840 Answers

SOURCE: Trying to remove headlight assembly to change turn signal bulb on

you need to take off front bumper to get the bottom bolt

Posted on Jan 24, 2009

bunnydawg
  • 5158 Answers

SOURCE: 2000 CHRYSLER CONCORDE HEADLIGHT BULB REPLACEMENT

thought i already answered this... must have been for someone else... you should be able to access the bulb from within the engine compartment... if it's on the side of the battery you may have to remove it. do not touch the bulb with your fingers as that shortens the life of it.

Robert

Posted on Jan 26, 2009

localwonder
  • 6784 Answers

SOURCE: how do you replace the headlight bulb on a 2001 chrysler lhs.

This can be done buy popping the hood and removing the bulb from the rear of the headlight housing. don't screw with the housing because, its leveled for optimal sight range.

Posted on Jan 28, 2009

jgwhomeequip
  • 1902 Answers

SOURCE: replacing headlight bulbs on a 2006 chrysler sebring

Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivability Test Procedure Book


This is a social web site,not a business
Just a place to talk like facebook

Jul 16, 2013 | Cars & Trucks

1 Answer

Can't remove lens cover on rear to access burned out bulb. Screws are out but don't want to crack the cover.


it may be possible that you don't have to remove the lens cover to replace the bulb, in most modern vehicles the bulbs come out from inside the trunk by turning the fitting & pulling the bulb out & replace it the same way by putting it back in & turning it in the opposite direction to lock it in place.......hope this helps......cheers.

Sep 04, 2011 | 2002 Mazda Tribute

1 Answer

Replace 2004 Crown Victoria headlight


From the engine compartment, unlock the 3 tabs that are over the headlight housing area. Remove the cover and unscrew the plastic ring that has the wires protruding from it. Carefully pulls the light fixture out of the housing. Pull the 2 L-shaped tabs up and remove the lens section. Reverse the steps to re-install the headlight. If replacing the full turn signal housing, unscrew 2 screws from each light , disconnect bulb wiring and remove. Replace accordingly.

Jul 23, 2010 | 2003 Ford Crown Victoria

1 Answer

How to change front bulbs for turn signal for 1997 Grand Jeep Cherokee


You will need a star screw driver and a phillips screw driver. First locate the screw on the outside between the turn signal lens and the side marker lens, looken that screw. Next, with the hood open, locate a metal piece coming from the turn signal body. That metal piece (about an 1 1/2 inch long) has a star screw. Unscrew it. Pull the turn signal body off its place. Grab the connector with your right hand (thumb and index finger), turn it counter clock wise, about one centimeter. When you feel it loose, just pul gently the connector and it should come out withe the bulb. Replace the bulb and put the conecto back turning it clock wise. Reassemble all again. That should take care of it.

Jun 29, 2010 | 1997 Jeep Grand Cherokee

1 Answer

How do i change the front turn signal bulb on my 2000 windstar lx


The screw that holds the lens must be unscrewed. Then,
you can replace the signal bulb. Put the lens back in place, and it's all done.

Jan 18, 2010 | 2000 Ford Windstar

1 Answer

My 1991 gmc sierra front side turning light bulb burnt out. I need to replace it. How do I replace it?


On the front turn signal cover there are 4 phillips head screws (1 on each corner) holding it onto the grill. Unscrew those 4 screws and pull the cover out some and you will see that there are 2 turn signal harness attached to the back of the lens. Push in the little plastic arm on the side of the harness and twist them to the right I think. This will unattach the harness from the back of the lens allowing you to pull it out. To get the bulb out of the harness, hold the harness and twist the bulb to the right or left and pull it out. On the bulb there is a little notch that will only allow you to turn it one way. Hope that helps.

Oct 06, 2009 | 1991 GMC Sierra

1 Answer

Is it easy to replace the rear turn signal and brake light bulbs on a 2005 Pacifica? Do you access the screws from the hatch?


You can access screws from hatch behind liner. there should be two screws for each lens. Bulbs and socket just turn and remove.

Aug 25, 2009 | 2005 Chrysler Pacifica

1 Answer

How do I change the rear break light?


How to Replace a Tail, Brake or Reverse Light writer_avatar.gif Contributor By eHow Contributing Writer Article Rating: stars_3_20.gif (70 Ratings) replacelight_hero.jpg Fix that broken tail light. Replacing a dead bulb on your car is almost as easy as replacing a light bulb at home. Perform this simple maintenance and avoid the hassle of receiving a citation for a missing brake lightmag-glass_10x10.gif.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderately Easy Instructions Things You'll Need:
  • Rubber Gloves
  • Automotive Light Bulbs
  • Red Tape
  • Cleaning Cloths
  • Rags
  • Screwdriver Sets
  1. Step 1 Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place.
  2. Step 2replacelight_2s.jpg Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb.
  3. Step 3replacelight_3s.jpg Unscrew the bulb. You'll have to push in and turn at the same time.
  4. Step 4 Take the bulb with you to the auto supply store to help you find an exact duplicate.
  5. Step 5replacelight_5s.jpg Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion.
  6. Step 6replacelight_6s.jpg Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultaneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in.
  7. Step 7 Replace the lens or the plastic cover.
  8. Step 8replacelight_8s.jpg Test your work by stepping on the brakes and turning on the headlights while a friend watches the new bulb to make sure it lights up.
  9. hope this will help you

Jul 20, 2009 | 2005 Chrysler Pacifica

1 Answer

How difficult is changing brake light on 2004 Envoy?


Hi. Its quite easy and i have a guide that will help you achieve your goal.

Step1 Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place. Step2 replacelight_2s.jpg Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb. Step3 replacelight_3s.jpg Unscrew the bulb. You'll have to push in and turn at the same time. Step4 Take the bulb with you to the auto supply store to help you find an exact duplicate. Step5 replacelight_5s.jpg Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion. Step6 replacelight_6s.jpg Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultaneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in. Step7 Replace the lens or the plastic cover. Step8 replacelight_8s.jpg Test your work by stepping on the brakes and turning on the headlights while a friend watches the new bulb to make sure it lights up.

Please rate and god bless.

Mar 26, 2009 | 2004 GMC Envoy

1 Answer

1991 Chrysler TC 2 Dr STD Convertible


This car epitomizes the term "orphan," but, like the little redhead with the big voice who had a broadway play named for her, it is loveable. Many people with some familiarity with the TC by Maserati believe it is a chopped LeBaron, but the truth is the LeBaron is a stretched TC. Many of the styling cues found on the early 90's Lebarons are based on the TC, but the TC was designed and built at the Maserati factory in Italy. It is not an exotic sports car. it is an enjoyable touring car that is an excellent daily driver.

May 14, 2008 | 1990 Chrysler TC

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...