Question about 2001 Volkswagen Jetta TDI
This could very well be an issue with the linkage needing adjustment, a bent fork, or the first gear is damaged. You will need to get it into a transmission shop or the dealer or a vw specialty shop to have it looked at further.
Posted on May 29, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a Direct Problem with the Transmission. When they **** and Stop as Described above, The only thing that can be Done is a Rebuild. The Clutches on the Inside of the Transmission have Siezed and Probably Caused Major Damage inside. Please Rate My Response! Thanks!
Posted on Feb 07, 2009
there is a linkage inside the transmission that came off or lose so you might have to take it to a mechanic to get in there and repair so do not start car no more and you might have to have the car towed to a mechanic to look at it.
Posted on May 27, 2011
With the engine off, check your operation of the gear shift. If you can go in and out of the gears fine without the engine running, then you have a worn clutch disc that needs replaced. If the problem still exists then you either have low fluid/weak hydraulic system, or there is a problem with the syncro that may be adjusted.
Posted on Nov 02, 2011
Tips for a great answer:
May 26, 2014 | 2006 Chrysler Pacifica
Nov 25, 2012 | 2006 Pontiac G6
Nov 15, 2012 | 2002 Mazda Tribute
Oct 01, 2012 | Cars & Trucks
Nov 20, 2011 | Nissan Cars & Trucks
Oct 29, 2011 | 2000 Ford Taurus
Oct 17, 2011 | Kia Sorento LX Cars & Trucks
Aug 14, 2011 | 1997 Ford Escort
Jul 15, 2011 | 1995 Ford Taurus
Feb 07, 2009 | 2004 Dodge Caravan
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: