Question about 2006 Toyota RAV4

1 Answer

Oil maint light flashing although oil levels ok

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome to the site. Since you are sure it has correct fluid, you probably need to reset the light. Refer to your owner manual for directions. You can try unplugging the battery for a second if you can't find the reset or you can unplug the fuse. Thanks for using FixYa and have a good day.

Posted on Apr 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maint req light is on. Seems to ride fine but doesn;t seem to get into high gear, not much above 2k RPM. transmission? would that trigger maint req light?


check oil level first on level ground ??? maybe vacum pipe leak?? had this fault last week guy was qouted 300 samolies to fix i did the job for free ,split pipe at autobox ..........

Sep 07, 2011 | 2008 Lexus Rx 350

1 Answer

Maint. req. light blinks 10 times after start up?


When a Honda Maint Req light blinks, but then stops, it is telling you to change your oil. If you don't change it, eventually, the maint req light will stay on. Here is how you reset the maint req light: 1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the odometer button.
4) After about 10-15 seconds, the light should go off.

If that doesn't work, try it this way: p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Verdana}

With the igniition off, press and hold the odometer button, turn the key to the "on" position, but do not start the car. Keep the odometer button down until the oil light begins and ends flashing. Turn the key off, and then start car to see if it worked or not.

May 08, 2011 | 2005 Honda Element

3 Answers

Oil light flashing on dash


check for proper oil level in engine with dipstick if ok.then install mechanical oil pressure gauge on oil pressure sending unit to verify proper oil pressure, if pressure ok. then replace the sending unit/sensor, if pressure not ok. , you may need to remove engine oil pan to check for restriction on oil pick-up tube screen. if ok replace pump. but also check clearance on mains and connecting rods.

Jan 24, 2011 | 1992 Honda Accord

1 Answer

2007 toyota corolla. 6 flashes of the "maint req"


That warning light usually only service (oil change) reminder.

Jun 15, 2010 | Cars & Trucks

3 Answers

Oil light flash and beeping


have you checked your oil levels as well it may be an indication for an oil change

Feb 10, 2010 | 2001 Volkswagen Beetle

1 Answer

Had 1st oil change on 08 4Runner @ 4980 miles. "Maint" light came on at 5000 miles indicating oil needs changed. How do I turn it off?


If you have your owners manual, should be a section in there on resetting the light. You may also want to try this method... With the ignition off press and hold the button for the trip meter reset, while still holding this, turn the ignition to the on position (don't start vehicle), you should see either the maint light start flashing (if this is what happens then it should go off after flashing a few times, then you can release button and start vehicle) or there should be a few lines where the mileage shows up, these lines will flash and start to countdown and disappear, then it should show "oil life 100%". Hope this helps

Jul 17, 2009 | 2003 GMC Envoy

1 Answer

Maint required indicator still on after oil has been changed


Hold mileage reset button down and turn key on. continue to hold button until dashes stop flashing and light goes out (approx. 10 seconds).

Apr 28, 2009 | Toyota Corolla Cars & Trucks

1 Answer

2004 toyoat camry Engine Maint. light


hello frcs68 , to reset the light , turn key off , press and hold the trip meter knob , turn the key to on , engine off , continue to hold it till it flashes , - - - - - , - - - - . - - - , - - , - , - - - - - , it looks like that , then its reset . hope that fix ya

Jan 03, 2009 | 2004 Toyota Camry

Not finding what you are looking for?
2006 Toyota RAV4 Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...