Question about 2002 Mercury Sable

1 Answer

Check engine light on at times also will blink then when i hit the gas it stalls or sputtters wont go anywhere then it after i let off the gass and hit the gas again it takes off makes a noise like air ir something is loose can hear inside not outside runs smooth

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 388 Answers

If the check engine light was on then it's best to take it to an autozone or similar auto parts store and have them do a diagnostic scan for free as surely it has set an error code. From there they can look up the code and suggest what the problem is.

Posted on Apr 01, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No acceleration, engine stalls when you hit the gas

There could be a vacuum leak causing this. Check all hoses that they are all connected and not all cracked up. it could be an intake manifold leak you need to check with a little water along the intake manifold to see if it gets sucked in. Some mechanics check by spraying starter fluid around the engine to see if it speeds up from an idle, but that can be dangerous if you have an open spark.

Nov 03, 2017 | Suzuki Aerio Cars & Trucks

1 Answer

2006 Chevy Impala, engine light is blinking and seems like no gas is getting to the engine and stalls when I'm not stepping on the gas

any time the check engine light is flashing the engine is miss firing, most likly cause is spark plug wires or colis, but also check the wiring harness from the crankshaft sensor to the ignation module they have a bad problem with coming out of the wiring lume and geting melted on the rear exhust manafold...good luck

Jan 13, 2012 | 2006 Chevrolet Impala

1 Answer

Custom cruiser heat wont work and stalls

It sounds to me like your engine coolant level may be exremely low and your engine is probably severly overheating. I would recommend checking your coolant (antifreeze) level and checking for possible engine damage due to overheating.

Nov 19, 2011 | 1991 Oldsmobile Custom Cruiser

1 Answer


Check engine light---scan for the fault codes. Go to your mechanic, or your local auto parts superstore. Most stores do it for free.

Apr 02, 2010 | 2003 Mercury Marauder

2 Answers

Why does my car stalls when the chk eng light comes on? Press gas pedal and car barely moves.

You describe a symptom that most often is related to malfunctioning / failing Throttle Position Sensor. Check engine codes and reference them to a OBD II code reader, you can use a inexpensive code reader from a Discount Auto Parts store... If code references TPS sensor replace and reset codes... hope this helps...

Aug 24, 2009 | 1992 Acura Legend

Not finding what you are looking for?
2002 Mercury Sable Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

79847 Answers


Level 3 Expert

5685 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides