I have a 97 acura 2.2cl how do i put codes in radio

https://radio-navicode.acura.com/

You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code.

briefly disconnect earth lead on battery.this should clear screen then punch in code you only have three attempts before it blocks up again

Hi:
The only way to get a radio code is to drive your car to the dealer, and have the VIN number handy. The service department can look up your radio code. This keeps theives from reselling stolen radios.

Turn your key to accessory until you see code on the unit. You simply push the radio station selection buttons, there should be 6 buttons. After you push the last button it should automatically come back on.

you need to get serial # ON RADIO and then call dealer they can look up code with correct serial #

We had the same problem. As advised from another website, we unhooked the battery and hooked the cables together for about 10 minutes. This reset the radio and allowed us to put in the 5-digit code. Now we're jammin'!

you need to take the neg (-) battery cable off to reset the radio. you can only enter the radio code 3 times incorrectly than it will lock up. i think you can pull the back up fuse from the under hood fuse box for 10 seconds and that will also reset it.

I had same problem with my 97 Acura 3.0cl and i called the Honda dealer they will ask your serial, Vin, model and milage # and then they will give u the code.

Hi,

The anti theft feature has been activated. Disconnect both battery terminasl for some 30 seconds and reconnect the. If after doing this, the radio asks for a CODE, then you need the code now, but if the radio keeps displaying ERROR E the radio is bad.( the radio will never give you any code to unlock it for that purpose you must go to your nearest Acura dealer as they are authorized to retrieved it online from factory)