Question about Chevrolet Express

1 Answer

How do i install a outside door handle on a 2005 chevy express 2500 van

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Here is how I would deal with it. I would buy a new window regulator and a new door handle both parts for the same door. I would take them and the vehicle to a glass shop which does auto glass. I would pay them to replace the regulator and have them replace the door handle while it is apart. 50 bucks to change the regulator, another 25 to replace the handle. The regulator is going to die at or around 10 years and you are within 4 years. So do it now when the door has to be disaasembled

Taking a door apart is a pain, requires special tools and knowledge in order to prevent collateral damage. You would gladly pay anyone 50 bucks if you ever did it before.

Posted on Apr 01, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2005 Chevy express van sliding door handle replacement

Check out Chilton's manual at the library - they will let you copy the pages you need in most cases. This is a problem you have to start by removing the inner panel and then you can get at it from behind the outside.

May 02, 2017 | Cars & Trucks

1 Answer

Hi! I have a 2005 Chevy Express Van 2500. I removed the seat belts and retractors from the van, unknowingly that by doing this, the belts would no longer pull out and now are stuck. Any suggestions?

Don't know what the problem is you give no information.
If it is stuck you may have to remove the plastic paneling and work the belt loose from the re-tractor spool. Give it a shot of dw40...just don't get it on the belt . It will weaken the fabric

Jul 06, 2015 | 2005 Chevrolet Express Cargo

1 Answer

2005 chevy express 2500 cargo van no running light drivers side

check the shell earth wires in engine bay there are a few just look for them and check them and clean them up.

Feb 05, 2014 | 2005 Chevrolet Express Cargo

1 Answer

2005 chevy van 2500 express is leaking tranmission fluid at pan

wipe everything clean and drive for a day to verify where the fluid is coming from. if it is coming from the pan then drain and remove the pan and replace the gasket. if not the replace the offending part or gasket.

Nov 25, 2013 | 1987 Ford Ranger

1 Answer

My right front door outside handle will not work on my 2008 chevy express

the rod conecting to the handle could have fell off, or handle where rod conects is broken

Feb 02, 2013 | 2008 Chevrolet Express Passenger

1 Answer

Why does the fuel pump keep failing in my 1998chevy 2500 van

where are you buying your pumps and what brand ? I would stay away from Airtec nothing but AC/DELCO from a repupable store not AZ !

Dec 04, 2012 | 2002 Chevrolet Express

1 Answer

2001 Chevy Express 2500 van - power window fuse blows constantly

shorted circuit usually in one of the window regulator/lift motor assemblys. remove interior door handles (or whatever is necessary) to access wiring connectors, and disconnect. insert a new fuse. shouldn't blow now. reconnect one connector at a time until the fuse blows. that is the shorted component. replace the component. occasionally where the wiring harness comes thru the frame and enters the door, the constant movement or vibration will cause the sharp edge to slice into a wire's insulation and cause a short...

Oct 11, 2010 | Chevrolet Express Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides