Question about Chevrolet Silverado 1500

2 Answers

The horn stopped working and still doesn't work after I replaced the fuse in the box under the hood. there is only one horn in this 2000 model. Did I miss another fuse somewhere?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

There will only be one fuse for the horn. Find and check the horn relay. If that works check the wiring and the horn switch..

Posted on Apr 01, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,977 Answers

If you can get to the horn run a jumper wire from the battery positive directly to the horn terminal,if the horn doesn`t work then the horn needs replacing.if the horn works then it could be the horn relay or power not being sent from the horn pad to the relay or only half the relay is working(the side that goes to the horn).did you check the fuse panel under the dash on the drivers side.

Posted on Apr 01, 2011

  • devon guliford Jan 02, 2013

    yes checked the fuse so its not the fuse

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2005 sierra horns stopped working.

The click you hear is the horn relay -- this likely has either dirty / corroded connections or burned contacts inside the relay. If cleaning all relevant connections doesn't solve the problem, replace the relay. You can find the realy by having someone push the horn button while you track down the click.

Charlie

Posted on Feb 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy blazer horn doesnt work


check fuse box inside of car also fuse box under hood too..find ur horns and if possible u can reach the wire thats plugged into each one disconnect them 1 at a time get another wire long enough too reach ur battery connect 1 end to horn with other end of wire gentl touch battery positive terminal horn should sound if bothe horns sound u have a fuse blown..

Aug 16, 2013 | 2000 Chevrolet Blazer

1 Answer

Horn stopped working on my 2000 plymouth neon


first thing you need to check is your FUSE inside the car or under the hood ...2 thing to check is the horn itself under the hood ...maybe the wire just unhooked or got split ... hope this helps

Mar 14, 2013 | 2000 Plymouth Neon

1 Answer

2005 toyota corolla horn doesn't work


You can replace the horn. Check to see if the wires connected to the horn have power. Check with a test light. If power is present then the horns are bad.

Apr 19, 2012 | 2005 Toyota Corolla

1 Answer

Replaced horn and now it wont work. Where is the fuse for the horn on a 2000 Merc Mountaineer


The fuse for the horn would be in the power distribution box located under the hood in the engine compartment (see picture below). Also below is a diagram of the fuse layout. The fuse you want to check will be the fuse in the number 10 position and should be a 15 amp fuse. There is a horn relay as well and the is the relay in that same box in the number 7 position. I hope this helps and good luck.


clifford224_408.jpg

clifford224_409.jpg

Aug 30, 2011 | 2000 Mercury Mountaineer

1 Answer

2000 Lincoln LS HOrn does not work and I already checked the fuses asd they appear to be good. Can you provide any other trouble shoot solutions?


easy check first ,, you need help,, disconnect the 2 wires at the horn itself, Located by the front gill under the hood,, use a multimeter to check for power,, have someone try and honk the horn to see if the horn itself is receiving power, if it is,, the horn went bad, if not,, the contacts in the horn contacts are bad, which doesn't happen often but it does happen, or ( and I don't know on your model, ) you may have a horn relay thats not working, I'll check more to see if I can locate that answer

Jun 06, 2011 | 2000 Lincoln LS

2 Answers

The horn in my 2003 chevy cavalier stopped working and i need to know why it stopped working and where the horn is located


It may be your horn fuse. It will be in one of your fuse boxes. Just follow your diagram on the fuse box lid.

Mar 05, 2011 | 2003 Chevrolet Cavalier

1 Answer

2005 sierra horns stopped working. I hear a click at the fuse box under the hood when i press horn. I know horns are good as i wired them direct. is there another fuse somewhere other than in the fuse box...


The click you hear is the horn relay -- this likely has either dirty / corroded connections or burned contacts inside the relay. If cleaning all relevant connections doesn't solve the problem, replace the relay. You can find the realy by having someone push the horn button while you track down the click.

Charlie

Feb 14, 2011 | GMC Sierra 1500 Cars & Trucks

2 Answers

My vw polo gti 2000 horn has stopped working and i dont no which fuse is the horn please tell me which number starting from top left corner thanks


alot of cars have differant placement for fuses. what you might want to do is read the owners manual or go to vw's website and find out the fuses location then you can replace it

Jan 06, 2010 | 2000 Volkswagen GTI

1 Answer

Horn not working have replaced fuse still same


There are two circuts for the horn.

Replace the relay switch (little black box) in the fuse box under the hood.

Sep 22, 2009 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,894 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...