Question about Mazda MPV

2 Answers

After replacing the fuel filter on my Mazda Etude, it stuggles to idle and jerkes when I eccelerate. I chose the MPV from your dropdown list as there is no Etudes to choose from

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 184 Answers

Make sure that you have put it on the right way around. ensure that if you removed the air cleaner to get to the filter ,that you refitted the wiring loom plug to the air flow meter,also that there are no splits in the rubber ducting that runs from air cleaner to throttle body.The latter is the most common cause of your fault.I hope this helps or get back with your further findings.Please remember to rate this answer.

Posted on Apr 01, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your idle (rpm) is unstable, try to clean the air intake manifold. If it doesn't work, try to clean the fuel stop and strainer located under the passenger's seat.

Posted on May 19, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont go from stop/small inclines jerks also when accelerating


follow your mechanics advice.but all fuel systems have a filter that can be changed

Jul 19, 2017 | 2001 Mazda MPV

2 Answers

Does Mazda etude 2001 model have a fuel filter if so Where is it located?


2000 and newer Mazda Etude and does not have a fuel filter.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day

Dec 19, 2011 | Cars & Trucks

2 Answers

My 2001 Mazda MPV is stalling and has a rough Idle. While driving the van the vehicle stop runing, After letting the vehicle sit for a while, the vehicle will start. This has happened a couple times over...


Sounds like a Fuel problem? Make sure that fuel line pressure is within specification according specs.
Fuel Line Pressure 0.38-0.42 mpa (55-61 psi)
Fuel hold pressure 0.176 mpa (25.5 psi)

Sep 06, 2011 | 2001 Mazda MPV

1 Answer

Is there a fuel filtr on a 2004 mazda mpv


I've never found an accessable extenal one on our 2004 MPV [crazy, huh?] But we have the official factory technicians service ["workshop"] manual, purchased from Mazda & it lists 2 fuel filters - it shows both are in the gas tank; the low pressure appears to be the simple screen on the pump intake & the high pressure is in the outflow from the pump - apparently connected to, or just under, the "fuel pump unit cover."   So the answer is: both the "low pressure" screen & what I would call the "real" high-pressure filter are inside the gas tank.. Hope that helps
Cheers, Bk

Jul 13, 2010 | 2004 Mazda MPV

1 Answer

2004 mazda MPV missing badly at idle in gear cylinder 1 missing


Did you change spark plugs and wires? The fuel pump wouldn't cause a miss, and if it was MAF, it wouldn't run at all. It has to be either spark or timing / timing belt.

May 31, 2009 | 2004 Mazda MPV

1 Answer

2003 Mazda Mpv jerks when idling abd breaking


Check to see if you have a MPV that has been included in the recall for the PCV line. Yes it is difficault to get to on your own, however they have special tools to reach behind the manifold to remove the line and install a new one. If you do it on your own it is very difficaul and will take a few hours as a I did before I found out about the recall. The service dept. should have asked you about the recall when you went to get the part from them. Where I got pissed was when they did replace the hose the faulty line had fouled the pcv valve and they did not bother to replace it and that is tucked under the intake manifold and under the fuel rails.

Jan 16, 2009 | 2003 Mazda MPV

1 Answer

Mazda etude 160ie a/c cuts out after approx 45 min driving.


Could be an electrical part that only fails after getting really hot. Coils and ignition modules are known for this. Unfortunately, these parts cannot be tested for this heat-soak type problems, other than to see if spark quality at the plugs has degraded when failing. One other thought. A bad gas cap which is not allowing air to flow in as gas is used can cause this and that is a cheap part to replace just for grins.

Jan 10, 2009 | 2003 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...