Question about Audi A3

Open Question

My audi a2 gear stick will not center on its own but is not stiff on side to side movements Cheers Rick. PS the audi a2 is not on the list.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: center locking not working electric window not working

I had the same problem with my 2002 2.5 tdi, i spent weeks looking for the fault an found it to be 2 broken wires inside the drivers door rubber wiring loom ( near door hindges ). it was causing same fault no int/light - no central locking to drivers door - no electric windows.
i managed to repair wires and it now fine..

Posted on Mar 29, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why has my forward and back gear shift movement become stiff?


of course it could be dry linkage and some WD40 might help for awhile .

Jun 05, 2016 | Cars & Trucks

1 Answer

My Audi A3 2.0 fsi sline Quattro is struggling to find gears ( very stiff to change and impossible to find reverse with the engine running)


First check the fluid level and make sure it is correct. If it's good you will then need to go to the dealership to have the codes pulled. I hope the problem is the fluid because it will be expensive otherwise.

Jan 04, 2015 | 2005 Audi A3 2.0

1 Answer

My 2003 audi a4 convertable is jumping out of 1st gear sometimes can you sugest what might be causing this


Whenever a stick shift is jumping out of gear you think transmission.
If the first gear has some teeth that are chewed up then it will cause this to happen.

First check your motor and transmission mounts to make sure excess movement isn't pulling your car out of gear

Second check all the shift linkage bushings to see that the car is in fact pushing fully into gear

Good luck!!

Feb 04, 2011 | 2004 Audi A4

1 Answer

When u come out reverse the gear stick goes stiff, hard to go back into first gear. been advised might be a pin, found piece of plastic under gear stick cover round shaped.


Hi,
Fiats do not enjoy a sound reputation for their transmissions. If you are confident in your skills, remove the cover / boot that surrounds the gear stick. and check it carefully for fitting into the housing. There may be a plastic of fibre cup that the ball of the gear stick rides in. depending on the locating device for this "bearing" will affect the movement of the gear stick. If you can lift the gearstick and it shows lots of slop, then the 'bushing is no longer holding the gearstick in the correct neutral position which enables each gear, including reverse, to be selected easily. The reason for the 'bushing' failing will have to be ascertained, it may be a simple fix, or it may be lots of aggravation, depending if the parts are all present and can be salvaged.

Good luck.

Feb 01, 2011 | 2006 Fiat 124

1 Answer

Clutch pedal sensor how do you change a clutch pedal sensor on an Audi A2


it will be under dash attached to clutch pedal assembly activated by movement of clutch pedal

Oct 16, 2009 | Audi A4 Cars & Trucks

1 Answer

Audi a4 tdi stiff gearchange worse when hot 1197 model


tandard practice to change the oil on a clutch replacement. Was the replacemmiles it's covered, but it's not sounds like the gearbox oil need changing. You don't say how many miles it has done. Gear box oil is not usually changed in a clutch replacement. Did an Audi garage carry out the rlacement? It could be the cable needs adjusting to allow the clutch to have free movement

Jul 23, 2009 | 1997 Audi A4

1 Answer

Audi a4 1997 tdi gearchange is stiff notchy


Possibly Too Heavy of Gear Oil.

Jul 23, 2009 | 1997 Audi A4

1 Answer

Audi A4 t/d 2ltr engine problem


The tork from the engine will make a car twitch as you say, especially if it is a high powered engine. But if you want to check the motor mounts get down so you can see them and have someone rev the engine and put it in gear. Excessive movement should be seen if the mount is broken. Use car not to get run over so chuck the wheels and secure the parking brake.

May 09, 2009 | 2005 Audi A4

1 Answer

Cruise control installation


Should not cause problems its normal to do something like that they had to protect the circuit.

Nov 21, 2008 | 2004 Audi A4

1 Answer

Center display on dash only showing gear selection


Right side of steering wheel there is a control stickBottom of that stick there is a press button, that is a selector for the that display functions. Try that. Sorry I forgot actually what that stick controls.
Good luck.

May 24, 2008 | 1999 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14379 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...