Question about 1990 Nissan Pulsar

1 Answer

Konked out still cranks wont fire 99 pulsar 1.6 auto replaced pump

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 184 Answers

Always check for the basics before replacing stuff to avoid time wasted and costs.
Check for spark at plugs while cranking,use a plug with a gap stretched out wide to work coil and module.It should be a healthy crack when it sparks.
Check for lack of fuel by spraying a carb or brake cleaner into open aircleaner while engine is being cranked.If it starts you will need to test fuel pump and power to it.
Check compression,nil or very low indicates broken timing chain/belt/keyway or internal damage.
I hope this helps,let me know your findings and we can work towards a fix.

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jeep is turning over but wont start. I replaced the coil and it will occasionly spark and attemt to start only to soon die then it wont get another spark at all. How do i fix this??


Jeeps most common problem is with these particular vehicles are the crank sensors. May also have a bad reluctor. which is part of the flywheel. What you need to do first, Need to first remove the crank sensor which is on top of the bell housing. Remove it and inspect for cracks if you see any cracks replace it. and reset gap. You can use a small piece cardboard like the thickness of an oil filter box,tape it to the tip end of the sensor,and reinstall. After inspection or replacement of the sensor, start vehicle,Also keep an eye on your tachometer . Your tachometer should slightly come up when cranking. If not replace sensor.The crank sensor is a part of the ignition system, the pcm needs to see where top dead center is or where #1 cylinder is to determine when to spark, simply put. So the pcm knows when to fire.

Jul 11, 2015 | 1999 Jeep Wrangler

1 Answer

91 pulsar n13 has spark has fuel wont start


If spark and fuel ok, the only other thing needed will be compression. Make sure the timing belt has not broken or jumped

May 17, 2015 | Nissan Pulsar Cars & Trucks

1 Answer

My '99 chevy truck with 5,7L 350 will start but wont stay running. put new fuel pump and relay switch in


First you must determine if the fuel is stopping or the spark is stopping..If the fuel is stopping this could be a computer problem.. If the spark is stopping then it could be the IGN Module in the distributer. or any nomber of sensors. Squirt a little fuel directly into the Throttle body on the intake manifold.. If the truck runs longer its probably loss of fuel.. Do this several times to make sure, be careful and only use a small amounty of fuel.. you do not want a fire.. RE: Spark: Take a plug wire and an old plug..put the wire on the plug.. hold the plug against a good ground .. have someone crank the engine .. does the plug stop firing? The engine dies.. and will not restart for a minuet or so.. during this "no start" time do the plug test. If the plug will not fire during this time take the module out and take it to Orillys Auto parts.. They can test it.. really expensive part. Don't replace until you know it is BAD..

May 14, 2014 | 1999 Chevrolet K1500

1 Answer

2004 nissan pulsar st ckp sensor


very common for the N16 pulsars to log this code, this is a crank position sensor fault. 99% of the time is the cam and crank sensors. best to replace them both as a pair, Nissan actually sell them as a pair for this issue, non genuine ones are very un reliable and not much cheeper anyways. the cam sensor is in the back side of the head above the bell housing of gearbox and the crank sensor is in the bottom of the engine block at the gearbox end facing the firewall.
the other 1% is streatched orout of timed timing chains, but normally just the sensors will fix it.

Jan 12, 2014 | Cars & Trucks

1 Answer

Fuel pump relay diagrams


auto shutoff relay controls both fuel and fire..the parts store can tell you for sure..

Jan 05, 2014 | Cars & Trucks

1 Answer

99 silverado 4.3 wont start


auto shutoff relay..it controls fuel pump and ignition..does the pump come on with atempt to start?

Dec 26, 2013 | Cars & Trucks

1 Answer

Replaced crank shaft 99 blazer, how do I orientate the crank shaft to the cam? I have set the arrow on the cam gear down turned crank till number 1 piston is very near TDC in alinement with V on the crank...


4.3 liter, right? I think you have it right--see pic below. So it cranks but no fire happening? Did you check firing order, etc.? Getting sparks? Fuel pump coming on? Injectors firing? If you had the engine out of the car, make sure you got all the ground wires back in place, etc.


jturcotte_356.gif

Dec 01, 2010 | 1999 Chevrolet Blazer

1 Answer

2004 stratus won't start


try checking the fuel pump or replace the spark plugs and wires because most dealers put cheapos on them

Dec 05, 2008 | 2004 Dodge Stratus

3 Answers

Car wont start


HI MATE SOUNDS LIKE CRANK SENSOR HAD THE SAME PROBS WITH A SKYLINE

Jun 16, 2008 | 1990 Nissan Pulsar

Not finding what you are looking for?

Open Questions:

See all 1990 Nissan Pulsar Questions

1990 Nissan Pulsar Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...